Mitsubishi Electronics DX-TL5000U instruction manual Various playback functions

Page 90

Other convenient functions (continued)

Various playback functions

Playing still frames

This unit is equipped with the various playback functions using the JOG dial or SHUTTLE ring.

step1. Press the PAUSE button during playback.

•The unit switches to still frame playback. Press the button again to resume playback.

•If a camera number (1 to 16) button is pressed during still frame playback in the single screen display, the picture of the that camera number is displayed.

Frame-by-frame playback

step1. Turn the JOG dial during still frame playback.

•Clockwise: Activates frame-by-frame playback in the forward direction.

•Counterclockwise: Activates frame-by-frame playback in the reverse direction.

•Keep turning clockwise: Activates continuous frame-by-frame playback in the forward direction.

•Keep turning counterclockwise: Activates continuous frame-by-frame playback in the reverse direction.

•When turning of JOG dial is stopped: Resumes still frame playback.

•When pressing the camera number button during still frame playback to display the single screen, the recorded picture may not be existed at that point or picture may not be displayed depending on the selected camera number or timing of displaying the still frame playback picture.

Shuttle viewing/direct shuttle viewing

By turning the SHUTTLE ring during playback, reverse playback, or still frame playback, the playback speed can be changed.

step1. Turn the SHUTTLE ring during playback or reverse playback (direct shuttle viewing), or still frame playback (shuttle viewing).

•The playback speed depends on the angle of the SHUTTLE ring turned.

•When letting go of the SHUTTLE ring, the ring returns to the center and the unit returns to still frame playback.

4 5 6

37

28

1

9

1High-speed rewind

2Reverse speed search (30 MB units)

3Reverse speed search (fourfold speed)

4Reverse speed search (double speed)

5Still frame playback

6Forward speed search (double speed)

7Forward speed search (fourfold speed)

8Forward speed search (30 MB units)

9High-speed fast forward

Shuttle hold

The playback speed can be maintained even when letting go of the SHUTTLE ring during shuttle viewing.

step1. Press the PAUSE button while holding the SHUTTLE ring in the angle for the desired playback speed.

step2. Let go of the SHUTTLE ring.

•The playback speed is maintained.

•To cancel shuttle hold, press the PAUSE button. The unit switches to still frame playback.

•During frame-by-frame playback in the single screen display, the frame feeding may not operate correctly when the JOG dial is turned too fast because this operation is performed while searching the picture supplied from the camera.

Reverse playback

step1. Press the REV. PLAY (REVERSE PLAYBACK) button while the unit is in stop mode.

•Playback in the reverse direction starts. To stop reverse playback, press the STOP button.

•For the picture recorded in frame recording, the reverse playback is performed in field playback (playback of one field of the recorded picture).

•When the reverse playback is started for the first time after turning the power on, the latest recording picture is played back.

High-speed fast-forward/high-speed rewind

step1. Turn the SHUTTLE ring for more than 1 second while playback is stopped.

•Clockwise for more than 1 second: Activates High-speed fast-forward playback.

•Counterclockwise for more than 1 second: Activates High-speed rewind playback.

•Press the STOP button: Stops playback.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

86

Page 89 Page 91
Image 90
Page 89 Page 91
Contents DX-TL5000U Page Avertissement BeginningImportant safeguards IiiSafety Check Damage requiring ServiceReplacement Parts ServicingUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents 80-83 System Menu74-76 85-89Flowchart Flowchart for connection and settingsTimer recording is executed and completed Setting the motion detectionSetting the timer recording Searching the recorded dataMajor operations and their functions Camera control buttons Busy indicatorDET DOT ON/OFF/M-DET Area SET UP Camera Number 9 Output A/B buttonSET UP button Power buttonAnalogue Output connectors Timer buttonCamera connectors Main switchAC power socket Video Cascade connectorsReset button Alarm in terminalsAlarm OUT terminals 16. RS485 IN/OUT connectorsConnecting to Cctv camera, monitor, and sensor ConnectionsConnections Alarm recording connection Cascade connection Keyboard DX-KB5UEPrecautions for attaching or removing the HDD Attaching or removing the HDDDisconnect the cables Remove the front covers When removing a HDDRemove the metal part Remove the HDD trayWhen attaching a HDD Attach the new HDD onto the HDD tray with four screwsFix the metal part with four screws Attach the front covers Page Connecting to an analogue video cassette recorder Clamping the cablesOptional items Recommended itemsAttaching the optional board Setting the menu using a mouse Setting a mouse How to set the menusSetting the menus Setting a menu with a mouseDisplaying a menu screen Closing a menu screenSelecting an item Setting parameters Using the front buttons of the unitUsing a mouse For some items, more detailed setting is requiredSymbols in the menus Address number using the front buttons of the unitSetup wizard is displayed when the unit is turned on Setup WizardSetup Wizard For the first time. The Wizard enables a quick setupSelect whether or not to make the recording settings Set the HDD configurationWhen selecting Partition Set the desired partition capacity When selecting NextMenu chart Menu chartAudio Menu chartFunctions ExitMenu chart Functions Pages RecordingEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Functions Pages Next MemoryData Clear Search Select Search Operations Search by MotionSet the motion detection conditions for playback Steps 1, 2Copy Data to Copy 1 Drive/Set Copy 1 Drive Select Other settings and then set the detailed settingsCopy Copy Data to Copy 2 Drive/Set Copy 2 DriveCopying the data of this unit to a video cassette Set the start time of copyStarting up the application software Playback softwareSystem requirements Operational panelBookmark menu Search menuOperation menu View menuAudio Information/AudioInformation Main deviceSet the start and end points of the data to be locked Protect DataProtect Data See page 88 for registering a book mark Select ProtectPTZ control using the menu PTZ control using the front panel buttonsPTZ Control Pre-alarm recording Settings concerning normal recording and alarm recordingSet Recording Pattern a Normal/Timer to D Timer RecordingSet the alarm mode Normal recording settingsAlarm recording settings Set the pre-alarm recording time in Pre-Alarm DurationAlarm Input Set the PTZ camera presetAlarm recording Set the recording camera for each sensor connectedLong pre-alarm recording Emergency Recording SetupCamera Setting RecordingAlarm area with the picture. See Operations Audio Recording SetupSet the audio recording mode Set the audio recording for each camera from 1 toSetting the program TimerTimer Carrying out timer recordingOverlapped timer settings ExampleMotion Det Set the reference interval timeSteps 1, 3, 4, 5 Color of the dot detecting motion changes System Time/Date SettingRear Terminal Setting Menu Language SelectionCall Out Settings Key SoundBuzzer Password Setting Releasing the Password Lock For the levels 1 For the disk management passwordActivating the Password Lock Changing the PasswordSplit buttons operations To cancel the sequential displayCamera number button operations Sequence button operationsOperations Split screen Multiplexer SettingOutput a Settings Single sequential screen Sequence SingleOutput B Settings Covert Camera Setting Alarm Display SettingSet the covert camera setting for each camera number Select output a or output BClock On Screen Display SettingOn Screen Information CameraAudio Setting Monitor Output AdjustRecorder Title Reset to Factory Setting This item is used to reset the menu settingsMenu Data Load Menu DataSave Menu Data Select the sharpness setting XGA Monitor SettingsSelect the display mode of the XGA output OptionRS-232C Setting RS-485 Cascade SettingLAN B Communication Setting Select Return in the screen of LAN a NAS Setting LAN a NAS SettingLAN a Address Setting Device InformationPTZ Setting PTZ Camera ConfigurationConfiguration Check List Elapsed Operating Time Service InfoSystem Log List Disk InformationRestore Set the camera number to be restoredSet the other detailed settings Internal HDD MemoryAdd/Remove HDD Device External HDDAttaching the HDD and setting the ID number Scsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5Change Partition Setting Data Management Setting for Main MemoryMain Device Repeat Settings Add/Remove DVD/CD DriveImage Originality Check Play Recording Data Readout SettingPlayback Device Repeat Setting Auto-Expire on Specified DateCopy 1/Copy Data ClearMain Storage Memory Deleting the data of the DVD takes about 30 or 40 minutesOther convenient functions CascadeTo control the other recorder, repeat steps 1 and 2 above Various playback functions Simultaneous playback during recording Playback the latest recorded contentsChanging playback intervals Triplex playbackRegistering the picture Registering a book markPicture copy Power failure reset recording Functions of the unit in case of power failurePower failure compensation circuit System Log List. SeeOperation examples Operation exampleSet the normal and alarm recording areas Performs alarm recording at the specified recording rateSettings Alarm area settings see Repeat recording settings seeMotion detection settings see pages 58 Set the motion detection settings for Motion BTimer recording settings see pages 56 Set the timer program number to ProgramSet the motion detection settings for Motion a and Motion B Active Monday Friday Digital Zoom button Basic operationsBasic multiplexer functions Split screen buttonsBasic manual recording To change the playback device Basic playbackRepeatedly. See To stop playback, press the Stop buttonBasic search Search by Time and DateSearch by Alarm List 100101 LoginCommunications by Web Browser Communications by Web Browser102 Main Menu103 Live MonitoringTime Search 104Playback Select the date and time and click Search105 Alarm List SearchConfiguration Menu Image SearchWhen you have selected cancel If you have selected cancel106 Recorder Title & Camera Titles Mail Setup107 Select change and left-clickClock Setup NAS SetupSelect NAS Setup and left-click 108Logout Change Login User109 Close the Web BrowserContinuous recording time table Recording time table110 Without audio recording111 Troubleshooting 112113 Others114 Countermeasure Log number output115 Call OUTCheck sheet Setup Menu 200 000Recording Set Recording Pattern a Normal/Timer 116117 Check sheetSet Recording Pattern B Timer 118119 Set Recording Pattern C Timer 120121 Set Recording Pattern D Timer 122123 Timer Configure Timer Program Emergency Recording SetupAudio Recording Setup 124Define Holidays Default125 Motion Det126 Rear Terminal SettingPassword Setting System Menu Language Selection127 Multiplexer SettingOutput a Settings Sequence MultiAlarm Display Setting Output a Output B SettingsAlarm Display Setting Output Setting 128Alarm Display Setting Output B Covert Camera Setting129 On Screen Display Setting Audio Setting130 131 System Menu 300 000Port Pan PTZ Setting PTZ Camera Configuration132 Device ID133 Memory Add/Remove HDD DeviceSelect using for Copy1 or Copy2 134Add/Remove DVD/CD Drive Data Management Setting for Main Memory Recording Data Readout Setting135 Glossary 136Glossary 137 GlossarySpecifications Specifications138 872C355B2
Related manuals
Manual 40 pages 7.44 Kb Manual 8 pages 45.69 Kb
Top Page Image Contents