Mitsubishi Electronics DX-TL5000U On Screen Display Setting, On Screen Information, Clock, Camera

Page 73

On Screen Display Setting

On Screen Information

This item is used to set the display mode and the location for the clock, triplex, and camera display on the monitor.

Setup Menu

4 System

6 On Screen Display Setting

1 On Screen Information

(Clock)

step1. Select the display mode of the clock.

Mode 1:

01-01-2004 Thu 00:00:00

Mode 2:

01-01-2004 Thu 00:00:00

Mode 3: Does not display the clock.

step2. Select the desired clock location.

(Triplex)

step3. Select the display mode of the remaining capacity and the operational conditions such as playback, recording, alarm recording, and emergency recording.

Mode 1: Displays the operational condition of the unit and the warning display.

Mode 2: Displays the remaining capacity of the specified device, the operational condition of the unit, and the warning display.

Mode 3: Displays the remaining capacity of the specified device, the operational condition of the unit, the HDD being used for playback or recording. The warning display is not displayed.

Mode 4: Displays the warning display.

Mode 5: Displays nothing.

•The remaining capacity displayed is the capacity of the device specified in “Device” of “Low Memory Alarm

Setting.” ( See pages 60 and 61.)

•The remaining capacity is not displayed when the “Device” of “Low Memory Alarm Setting” is set to “Off.”

step4. Select the desired display location.

(Camera)

step5. Select the display mode of the camera information.

Number: Displays the camera number.

Title: Displays the title set in “Camera Title.” The title can be recorded along with the picture. None: Displays nothing.

step6. Select the desired display location.

•When display mode is set to “Title,” title is displayed on the top when display location is set to “Top-Left” or “Top-Right,” and it is displayed on the bottom when display location is set to “Bottom-Left” or “Bottom-Right.”

Display mode example

 

 

Camera title

 

 

(during single screen display)

Recorder title

 

Warning

 

 

 

 

 

 

RECORDER1

CAMERA1

ALERT

 

 

 

 

 

 

 

 

REM 20%

REC [A]

PLAY [ID:1] COPY1 COPY2

 

 

 

 

 

 

Specified device

Specified device

 

 

Operational conditions

Remaining capacity of the specified device

Camera Title

This item is used to set the titles of each connected cam- era individually. When the display mode of the camera in- formation is set to “Title,” the title, showing the location of the camera, appears on the screen for an easy-to- understand monitoring system.

•The camera titles can be input with a personal

computer by using the Web function. ( See page 107.)

•Up to 16 characters can be used for the title.

•The number of characters displayed on the screen is:

First 12 for the split 16 screen display All 16 for the other screen display

Setup Menu

4 System

6 On Screen Display Setting

steps 1, 2

2Camera Title

step 3

3Camera Title Overview

DCamera Title Overview

step1. Set the camera number for which the camera title is set.

step2. Input the camera title by using the characters shown on the bottom of the screen.

step3. Display the preview screen to check the settings you have set.

•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations

69

Page 72 Page 74
Image 73
Page 72 Page 74
Contents DX-TL5000U Page Beginning AvertissementIii Important safeguardsReplacement Parts Damage requiring ServiceSafety Check ServicingUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents 74-76 System Menu80-83 85-89Flowchart for connection and settings FlowchartSetting the timer recording Setting the motion detectionTimer recording is executed and completed Searching the recorded dataMajor operations and their functions DET DOT ON/OFF/M-DET Area SET UP Camera Number 9 Busy indicatorCamera control buttons Output A/B buttonAnalogue Output connectors Power buttonSET UP button Timer buttonAC power socket Main switchCamera connectors Video Cascade connectorsAlarm OUT terminals Alarm in terminalsReset button 16. RS485 IN/OUT connectorsConnections Connecting to Cctv camera, monitor, and sensorConnections Alarm recording connection Keyboard DX-KB5UE Cascade connectionAttaching or removing the HDD Precautions for attaching or removing the HDDRemove the metal part When removing a HDDDisconnect the cables Remove the front covers Remove the HDD trayAttach the new HDD onto the HDD tray with four screws When attaching a HDDFix the metal part with four screws Attach the front covers Page Clamping the cables Connecting to an analogue video cassette recorderRecommended items Optional itemsAttaching the optional board Setting the menus How to set the menusSetting the menu using a mouse Setting a mouse Setting a menu with a mouseClosing a menu screen Displaying a menu screenSelecting an item Using a mouse Using the front buttons of the unitSetting parameters For some items, more detailed setting is requiredAddress number using the front buttons of the unit Symbols in the menusSetup Wizard Setup WizardSetup wizard is displayed when the unit is turned on For the first time. The Wizard enables a quick setupWhen selecting Partition Set the desired partition capacity Set the HDD configurationSelect whether or not to make the recording settings When selecting NextMenu chart Menu chartFunctions Menu chartAudio ExitFunctions Pages Recording Menu chartEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Memory Functions Pages NextData Clear Search Set the motion detection conditions for playback Search by MotionSelect Search Operations Steps 1, 2Copy Select Other settings and then set the detailed settingsCopy Data to Copy 1 Drive/Set Copy 1 Drive Copy Data to Copy 2 Drive/Set Copy 2 DriveSet the start time of copy Copying the data of this unit to a video cassetteSystem requirements Playback softwareStarting up the application software Operational panelOperation menu Search menuBookmark menu View menuInformation Information/AudioAudio Main deviceProtect Data Protect DataSet the start and end points of the data to be locked See page 88 for registering a book mark Select ProtectPTZ control using the front panel buttons PTZ control using the menuPTZ Control Set Recording Pattern a Normal/Timer to D Timer Settings concerning normal recording and alarm recordingPre-alarm recording RecordingAlarm recording settings Normal recording settingsSet the alarm mode Set the pre-alarm recording time in Pre-Alarm DurationAlarm recording Set the PTZ camera presetAlarm Input Set the recording camera for each sensor connectedCamera Setting Emergency Recording SetupLong pre-alarm recording RecordingSet the audio recording mode Audio Recording SetupAlarm area with the picture. See Operations Set the audio recording for each camera from 1 toTimer TimerSetting the program Carrying out timer recordingExample Overlapped timer settingsSet the reference interval time Motion DetSteps 1, 3, 4, 5 Color of the dot detecting motion changes Rear Terminal Setting Time/Date SettingSystem Menu Language SelectionKey Sound Call Out SettingsBuzzer Password Setting Activating the Password Lock For the disk management passwordReleasing the Password Lock For the levels 1 Changing the PasswordCamera number button operations To cancel the sequential displaySplit buttons operations Sequence button operationsOperations Output a Settings Multiplexer SettingSplit screen Single sequential screen Sequence SingleOutput B Settings Set the covert camera setting for each camera number Alarm Display SettingCovert Camera Setting Select output a or output BOn Screen Information On Screen Display SettingClock CameraMonitor Output Adjust Audio SettingRecorder Title This item is used to reset the menu settings Reset to Factory SettingLoad Menu Data Menu DataSave Menu Data Select the display mode of the XGA output XGA Monitor SettingsSelect the sharpness setting OptionRS-485 Cascade Setting RS-232C SettingLAN B Communication Setting LAN a Address Setting LAN a NAS SettingSelect Return in the screen of LAN a NAS Setting Device InformationPTZ Camera Configuration PTZ SettingConfiguration Check List System Log List Service InfoElapsed Operating Time Disk InformationSet the camera number to be restored RestoreSet the other detailed settings Add/Remove HDD Device MemoryInternal HDD External HDDScsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5 Attaching the HDD and setting the ID numberMain Device Repeat Settings Data Management Setting for Main MemoryChange Partition Setting Add/Remove DVD/CD DrivePlayback Device Repeat Setting Recording Data Readout SettingImage Originality Check Play Auto-Expire on Specified DateMain Storage Memory Data ClearCopy 1/Copy Deleting the data of the DVD takes about 30 or 40 minutesCascade Other convenient functionsTo control the other recorder, repeat steps 1 and 2 above Various playback functions Changing playback intervals Playback the latest recorded contentsSimultaneous playback during recording Triplex playbackRegistering a book mark Registering the picturePicture copy Power failure compensation circuit Functions of the unit in case of power failurePower failure reset recording System Log List. SeeOperation example Operation examplesSettings Alarm area settings see Performs alarm recording at the specified recording rateSet the normal and alarm recording areas Repeat recording settings seeSet the motion detection settings for Motion B Motion detection settings see pages 58Set the timer program number to Program Timer recording settings see pages 56Set the motion detection settings for Motion a and Motion B Active Monday Friday Basic multiplexer functions Basic operationsDigital Zoom button Split screen buttonsBasic manual recording Repeatedly. See Basic playbackTo change the playback device To stop playback, press the Stop buttonSearch by Time and Date Basic search100 Search by Alarm ListCommunications by Web Browser Login101 Communications by Web BrowserMain Menu 102Live Monitoring 103Playback 104Time Search Select the date and time and click SearchConfiguration Menu Alarm List Search105 Image SearchIf you have selected cancel When you have selected cancel106 107 Mail SetupRecorder Title & Camera Titles Select change and left-clickSelect NAS Setup and left-click NAS SetupClock Setup 108109 Change Login UserLogout Close the Web Browser110 Recording time tableContinuous recording time table Without audio recording111 112 TroubleshootingOthers 113Countermeasure Log number output 114Call OUT 115Recording Set Recording Pattern a Normal/Timer Setup Menu 200 000Check sheet 116Check sheet 117118 Set Recording Pattern B Timer119 120 Set Recording Pattern C Timer121 122 Set Recording Pattern D Timer123 Audio Recording Setup Emergency Recording SetupTimer Configure Timer Program 124125 DefaultDefine Holidays Motion DetPassword Setting Rear Terminal Setting126 System Menu Language SelectionOutput a Settings Multiplexer Setting127 Sequence MultiAlarm Display Setting Output Setting Output B SettingsAlarm Display Setting Output a 128Covert Camera Setting Alarm Display Setting Output B129 Audio Setting On Screen Display Setting130 System Menu 300 000 131132 PTZ Setting PTZ Camera ConfigurationPort Pan Device IDMemory Add/Remove HDD Device 133134 Select using for Copy1 or Copy2Add/Remove DVD/CD Drive Recording Data Readout Setting Data Management Setting for Main Memory135 136 GlossaryGlossary Glossary 137Specifications Specifications138 872C355B2
Related manuals
Manual 40 pages 7.44 Kb Manual 8 pages 45.69 Kb
Top Page Image Contents