COM/LAN (continued) | System Menu |
LAN A (NAS) Setting
This item is used to make the communication settings between this unit and the copy devices.
•Consult your dealer about the NAS devices supported.
System Menu
1 COM/LAN
step 3
4
LAN A (NAS) Setting
step 1
1 LAN A Address Setting
2 Device Information
step 2
1 to 8
NAS Device 1 to 8 Information
(LAN A Address Setting)
step1. Set the IP address, sub net mask, and Gateway.
•MAC address is shown on the bottom of the screen of <LAN A (NAS) Setting>.
•Do not assign the same IP address or Network Address for LAN A and LAN B.
•Do not assign “000.000.000.000” to IP address and broadcast address. If this address is assigned, communications or any other functions of this unit may not be performed correctly.
•The setting cannot be changed during recording. Stop recording before changing the setting.
(Device Information)
step2. Check the IP address and directory of NAS devices 1 to 8.
•After checking, you can test the actual connecting status by executing the mount test. Select “Test” to execute the mount test.
•Using the web function of this unit is required to input the IP address and directory.
step3. Select “Return” in the screen of <LAN A (NAS) Setting>.
•When the setting is changed, the power turns off automatically and then the unit restarts.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
76