System (continued) | Setup Menu |
Multiplexer function related button operations/operation table
The multiplexer function of this unit allows the picture sup- plied from the camera to be displayed using split screens. It is also possible to set the position of the camera number
to be displayed. (
See page 96 for basic operations of the multiplexer.)
Camera number button operations
When pressing a camera number button, the picture supplied from the camera connected to that camera number terminal is displayed in a single screen. Even during split/ sequential screen display, picture of any camera number can be displayed in a single screen by pressing the respective camera number button.
SPLIT buttons operations
When pressing the SPLIT buttons, the split screen is dis- played in the following order.
SPLIT4 ( | ) button | : SPLIT 4a SPLIT 4b SPLIT | ||
|
| 4c SPLIT 4d | SPLIT 4a | • • • |
SPLIT9 ( | ) button | : SPLIT 9a SPLIT 9b SPLIT 9a | ||
|
| • • • |
|
|
SPLIT10 ( | ) button | : SPLIT 10a | SPLIT 10b | SPLIT |
|
| 10a • • • |
|
|
SPLIT13 ( | ) button | : SPLIT 13a | SPLIT 13b | SPLIT |
|
| 13a • • • |
|
|
SPLIT16 ( | ) button | : SPLIT 16 screen |
| |
SEQUENCE button operations
When pressing the SEQUENCE button, the sequential display of the split or single display being displayed is started. Make the detailed settings of this display in the <Multiplexer Setting> (Setup Menu
System
Multiplexer Setting).
Available modes
“SPLIT 13 sequential,” “SPLIT 10 sequential,” “SPLIT 9 sequential,” “SPLIT 4 sequential,” “Single screen sequential”
•Sequential display does not appear during playback.
•The split screen setting can be set using “Split 4 screen,” “Split 9 screen,” “Split 10 screen,” “Split 13 screen” or “Split 16 screen” in the <Output A Settings> and <Output B Settings> (Setup Menu 
System 
Multiplexer Setting 
Output A Settings/Output B Settings) respectively.
To cancel the sequential display
Displaying other type of split screen or pressing a camera number button (1 to 16) for displaying single screen can- cels the sequential display.
•When a menu screen is displayed, the single screen display does not appear even when pressing a camera number button (1 to 16). In this case, clear the menu screen first and then press a camera number button (1 to 16).
DIGITAL ZOOM button operations
By pressing the DIGITAL ZOOM button during single screen display, the displayed picture can be viewed at 100%, 200% or 400% magnification.
•The magnification display function can be used only during single screen display. The center point moves vertically and horizontally by pressing the MOVE buttons.
step1. Press the DIGITAL ZOOM button during single screen display.
•“X1” appears on the top left of the single screen display and the magnification center point (X) appears.
X1
X 
step2. To move the center point vertically or horizontally, press the 
, 
, 
and 
buttons.
•The position of the magnification center point and the condition of the magnification screen are stored even when the display screen is switched or the power is turned off. This is useful when the point to magnify is determined in advance.
The condition of the magnification screen is reset when performing the triplex playback.
step3. Press the DIGITAL ZOOM button.
•Each time the button is pressed, the magnification percentage switches in the order of X2(200%), X4(400%), normal, and X1(100%).
X2 | X4 |
•The magnification function can also be used during playback.
•When playing back the picture recorded by multiple cameras in the single screen display, a black screen may appear when pausing playback and then display the magnified screen. In this case, display the magnified screen by turning the JOG dial to advance the picture frame by frame.
•The magnification display function of this unit uses digital magnification and screen details may appear pixelized when magnifying.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
64