Mitsubishi Electronics DX-TL5000U instruction manual Load Menu Data, Save Menu Data

Page 76

Menu Data

Setup Menu

This menu is used to update and save the menu settings of this unit. This is done by loading the menu settings which is copied from another DX-TL5000U via the external media such as USB memory, the DVD disc, or CD available for this unit.

•During loading or saving the menu data, other operations are not accepted.

Load Menu Data

This item is used to update the menu settings of this unit by loading the menu settings copied on the external media.

•To load or change the menu settings stored on the external media, set the HDD settings (Alarm area, alarm area capacity, LPA, and LPA area capacity) of this unit to the same settings as the recorder which has been used for copying the menu settings. When these settings are different between this unit and the recorder which has been used for copying, the menu settings cannot be updated.

•The menu setting cannot be updated by using the menu data of which the format is different. (For example, the construction of the menu has been changed due to the addition of the function, etc.)

Setup Menu

5 Menu Data

step 3

1 Load Menu Data

steps 1, 2

1 Load Menu Device Selection

step1. Select the device and the group to be used for loading the menu settings.

step2. Select “Eject” to eject the device.

•“Eject” appears only when the device selected on step 1 can be ejected.

step3. Select “Execute.”

•The menu settings of this unit is updated and “Menu setting data is loaded.” appears on the screen.

•When the medium to be used for loading the menu is not prepared, “Device does not exist.” appears on the screen.

•When loading the data with the setting of “IP Address,” “Sub Net Mask,” “Gateway,” “Service Port Setting” of LAN B, “IP Address,” “Sub Net Mask,” “Gateway” of LAN A, or menu language selection changed, the power turns off automatically. Then this unit restarts.

•The time is not adjusted when the menu loading is completed. Adjust the time setting.

Save Menu Data

This item is used to save the menu settings of this unit to the external device.

Setup Menu

5 Menu Data

step 3

2 Save Menu Data

steps 1, 2

1 Save Menu Device Selection

step1. Select the device and the group to be used for saving the menu settings of this unit.

step2. Select “Eject” to eject the device.

•“Eject” appears only when the device selected on step 1 can be ejected.

step3. Select “Execute.”

•The menu settings are saved to the external device.

•When completing saving, “Menu setting data is saved.” appears on the screen.

•When the medium to be used for saving the menu is not prepared, “Device does not exist.” appears on the screen.

•Loading and saving the menu data are available only while the unit is in stop mode (not in playback, recording, backup, or communication).

•Loading or saving the menu data may take a few seconds to start after selecting “Execute.”

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

72

Page 75 Page 77
Image 76
Page 75 Page 77
Contents DX-TL5000U Page Avertissement BeginningImportant safeguards IiiDamage requiring Service Replacement PartsSafety Check ServicingUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents System Menu 74-7680-83 85-89Flowchart Flowchart for connection and settingsSetting the motion detection Setting the timer recordingTimer recording is executed and completed Searching the recorded dataMajor operations and their functions Busy indicator DET DOT ON/OFF/M-DET Area SET UP Camera Number 9Camera control buttons Output A/B buttonPower button Analogue Output connectorsSET UP button Timer buttonMain switch AC power socketCamera connectors Video Cascade connectorsAlarm in terminals Alarm OUT terminalsReset button 16. RS485 IN/OUT connectorsConnections Connecting to Cctv camera, monitor, and sensorConnections Alarm recording connection Cascade connection Keyboard DX-KB5UEPrecautions for attaching or removing the HDD Attaching or removing the HDDWhen removing a HDD Remove the metal partDisconnect the cables Remove the front covers Remove the HDD trayAttach the new HDD onto the HDD tray with four screws When attaching a HDDFix the metal part with four screws Attach the front covers Page Connecting to an analogue video cassette recorder Clamping the cablesRecommended items Optional itemsAttaching the optional board How to set the menus Setting the menusSetting the menu using a mouse Setting a mouse Setting a menu with a mouseClosing a menu screen Displaying a menu screenSelecting an item Using the front buttons of the unit Using a mouseSetting parameters For some items, more detailed setting is requiredSymbols in the menus Address number using the front buttons of the unitSetup Wizard Setup WizardSetup wizard is displayed when the unit is turned on For the first time. The Wizard enables a quick setupSet the HDD configuration When selecting Partition Set the desired partition capacitySelect whether or not to make the recording settings When selecting NextMenu chart Menu chartMenu chart FunctionsAudio ExitMenu chart Functions Pages RecordingEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Memory Functions Pages NextData Clear Search Search by Motion Set the motion detection conditions for playbackSelect Search Operations Steps 1, 2Select Other settings and then set the detailed settings CopyCopy Data to Copy 1 Drive/Set Copy 1 Drive Copy Data to Copy 2 Drive/Set Copy 2 DriveCopying the data of this unit to a video cassette Set the start time of copyPlayback software System requirementsStarting up the application software Operational panelSearch menu Operation menuBookmark menu View menuInformation/Audio InformationAudio Main deviceProtect Data Protect DataSet the start and end points of the data to be locked See page 88 for registering a book mark Select ProtectPTZ control using the front panel buttons PTZ control using the menuPTZ Control Settings concerning normal recording and alarm recording Set Recording Pattern a Normal/Timer to D TimerPre-alarm recording RecordingNormal recording settings Alarm recording settingsSet the alarm mode Set the pre-alarm recording time in Pre-Alarm DurationSet the PTZ camera preset Alarm recordingAlarm Input Set the recording camera for each sensor connectedEmergency Recording Setup Camera SettingLong pre-alarm recording RecordingAudio Recording Setup Set the audio recording modeAlarm area with the picture. See Operations Set the audio recording for each camera from 1 toTimer TimerSetting the program Carrying out timer recordingOverlapped timer settings ExampleSet the reference interval time Motion DetSteps 1, 3, 4, 5 Color of the dot detecting motion changes Time/Date Setting Rear Terminal SettingSystem Menu Language SelectionKey Sound Call Out SettingsBuzzer Password Setting For the disk management password Activating the Password LockReleasing the Password Lock For the levels 1 Changing the PasswordTo cancel the sequential display Camera number button operationsSplit buttons operations Sequence button operationsOperations Multiplexer Setting Output a SettingsSplit screen Single sequential screen Sequence SingleOutput B Settings Alarm Display Setting Set the covert camera setting for each camera numberCovert Camera Setting Select output a or output BOn Screen Display Setting On Screen InformationClock CameraMonitor Output Adjust Audio SettingRecorder Title Reset to Factory Setting This item is used to reset the menu settingsLoad Menu Data Menu DataSave Menu Data XGA Monitor Settings Select the display mode of the XGA outputSelect the sharpness setting OptionRS-232C Setting RS-485 Cascade SettingLAN B Communication Setting LAN a NAS Setting LAN a Address SettingSelect Return in the screen of LAN a NAS Setting Device InformationPTZ Camera Configuration PTZ SettingConfiguration Check List Service Info System Log ListElapsed Operating Time Disk InformationSet the camera number to be restored RestoreSet the other detailed settings Memory Add/Remove HDD DeviceInternal HDD External HDDAttaching the HDD and setting the ID number Scsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5Data Management Setting for Main Memory Main Device Repeat SettingsChange Partition Setting Add/Remove DVD/CD DriveRecording Data Readout Setting Playback Device Repeat SettingImage Originality Check Play Auto-Expire on Specified DateData Clear Main Storage MemoryCopy 1/Copy Deleting the data of the DVD takes about 30 or 40 minutesCascade Other convenient functionsTo control the other recorder, repeat steps 1 and 2 above Various playback functions Playback the latest recorded contents Changing playback intervalsSimultaneous playback during recording Triplex playbackRegistering a book mark Registering the picturePicture copy Functions of the unit in case of power failure Power failure compensation circuitPower failure reset recording System Log List. SeeOperation examples Operation examplePerforms alarm recording at the specified recording rate Settings Alarm area settings seeSet the normal and alarm recording areas Repeat recording settings seeMotion detection settings see pages 58 Set the motion detection settings for Motion BTimer recording settings see pages 56 Set the timer program number to ProgramSet the motion detection settings for Motion a and Motion B Active Monday Friday Basic operations Basic multiplexer functionsDigital Zoom button Split screen buttonsBasic manual recording Basic playback Repeatedly. SeeTo change the playback device To stop playback, press the Stop buttonBasic search Search by Time and DateSearch by Alarm List 100Login Communications by Web Browser101 Communications by Web Browser102 Main Menu103 Live Monitoring104 PlaybackTime Search Select the date and time and click SearchAlarm List Search Configuration Menu105 Image SearchIf you have selected cancel When you have selected cancel106 Mail Setup 107Recorder Title & Camera Titles Select change and left-clickNAS Setup Select NAS Setup and left-clickClock Setup 108Change Login User 109Logout Close the Web BrowserRecording time table 110Continuous recording time table Without audio recording111 Troubleshooting 112113 Others114 Countermeasure Log number output115 Call OUTSetup Menu 200 000 Recording Set Recording Pattern a Normal/TimerCheck sheet 116117 Check sheetSet Recording Pattern B Timer 118119 Set Recording Pattern C Timer 120121 Set Recording Pattern D Timer 122123 Emergency Recording Setup Audio Recording SetupTimer Configure Timer Program 124Default 125Define Holidays Motion DetRear Terminal Setting Password Setting126 System Menu Language SelectionMultiplexer Setting Output a Settings127 Sequence MultiOutput B Settings Alarm Display Setting Output SettingAlarm Display Setting Output a 128Covert Camera Setting Alarm Display Setting Output B129 Audio Setting On Screen Display Setting130 131 System Menu 300 000PTZ Setting PTZ Camera Configuration 132Port Pan Device ID133 Memory Add/Remove HDD Device134 Select using for Copy1 or Copy2Add/Remove DVD/CD Drive Recording Data Readout Setting Data Management Setting for Main Memory135 136 GlossaryGlossary 137 GlossarySpecifications Specifications138 872C355B2
Related manuals
Manual 40 pages 7.44 Kb Manual 8 pages 45.69 Kb
Top Page Image Contents