Mitsubishi Electronics DX-TL5000U Alarm Display Setting, Select output a or output B

Page 72

System (continued)

Setup Menu

Alarm Display Setting

This item is used to display the picture input with alarm signal in the single screen display or split screen display which has been pre-set. When another alarm signal is in- put during alarm recording, the picture with the latest alarm signal appears in the single screen display or split screen display. The screen returns to the previous display when the alarm recording is completed.

The alarm display setting is available for either output A or B. Select the desired output for alarm display. You cannot use alarm display on both output A and B at the same time.

Setup Menu

4 System

5 Multiplexer Setting

4 Alarm Display Setting

step1. Select output A or output B.

Off: Does not perform alarm display.

step2. Select the desired single screen display or split screen display which is set in the <Multiplexer Setting> to be displayed when the alarm signal is input for each sensor connected.

•When <Covert Camera Setting> is set to “Off,” the operational mode display and alarm display setting do not function.

Setup Menu

4 System

5Multiplexer Setting

5Covert Camera Setting

step1. Set the covert camera setting for each camera number.

On: Displays the picture supplied from the camera.

Off: Does not display the picture supplied from the camera and the screen of that camera turns blue.

Covert Camera Setting

This item is used to set the picture of the specified camera number not to be displayed regardless of the presence of video signals.

1

2

3

4

 

 

 

 

- -

6

- -

8

 

 

 

 

9

10

11

12

 

 

 

 

13

14

15

16

 

 

 

 

•When the picture is interrupted due to the camera trouble, etc. while the <Covert Camera Setting> is set to “Off,” the warning message does not appear on the screen, however, if “Warning” is set for “Buzzer” setting, the buzzer sounds. The unit registers this error in the <System Log List> and outputs the CALL OUT signal.

•When setting <Covert Camera Setting> to “Off” for a camera set for recording operation, recording is performed without displaying the picture on the screen.

•When <Covert Camera Setting> is set to “Off,” the playback picture is not displayed and the screen turns blue for that camera number. To display the playback picture, set it to “On.”

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

68

Page 71 Page 73
Image 72
Page 71 Page 73
Contents DX-TL5000U Page Avertissement BeginningImportant safeguards IiiDamage requiring Service Replacement PartsSafety Check ServicingUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents System Menu 74-7680-83 85-89Flowchart Flowchart for connection and settingsSetting the motion detection Setting the timer recordingTimer recording is executed and completed Searching the recorded dataMajor operations and their functions Busy indicator DET DOT ON/OFF/M-DET Area SET UP Camera Number 9Camera control buttons Output A/B buttonPower button Analogue Output connectorsSET UP button Timer buttonMain switch AC power socketCamera connectors Video Cascade connectorsAlarm in terminals Alarm OUT terminalsReset button 16. RS485 IN/OUT connectorsConnecting to Cctv camera, monitor, and sensor ConnectionsConnections Alarm recording connection Cascade connection Keyboard DX-KB5UEPrecautions for attaching or removing the HDD Attaching or removing the HDDWhen removing a HDD Remove the metal partDisconnect the cables Remove the front covers Remove the HDD trayWhen attaching a HDD Attach the new HDD onto the HDD tray with four screwsFix the metal part with four screws Attach the front covers Page Connecting to an analogue video cassette recorder Clamping the cablesOptional items Recommended itemsAttaching the optional board How to set the menus Setting the menusSetting the menu using a mouse Setting a mouse Setting a menu with a mouseDisplaying a menu screen Closing a menu screenSelecting an item Using the front buttons of the unit Using a mouseSetting parameters For some items, more detailed setting is requiredSymbols in the menus Address number using the front buttons of the unitSetup Wizard Setup WizardSetup wizard is displayed when the unit is turned on For the first time. The Wizard enables a quick setupSet the HDD configuration When selecting Partition Set the desired partition capacitySelect whether or not to make the recording settings When selecting NextMenu chart Menu chartMenu chart FunctionsAudio ExitMenu chart Functions Pages RecordingEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Functions Pages Next MemoryData Clear Search Search by Motion Set the motion detection conditions for playbackSelect Search Operations Steps 1, 2Select Other settings and then set the detailed settings CopyCopy Data to Copy 1 Drive/Set Copy 1 Drive Copy Data to Copy 2 Drive/Set Copy 2 DriveCopying the data of this unit to a video cassette Set the start time of copyPlayback software System requirementsStarting up the application software Operational panelSearch menu Operation menuBookmark menu View menuInformation/Audio InformationAudio Main deviceProtect Data Protect DataSet the start and end points of the data to be locked See page 88 for registering a book mark Select ProtectPTZ control using the menu PTZ control using the front panel buttonsPTZ Control Settings concerning normal recording and alarm recording Set Recording Pattern a Normal/Timer to D TimerPre-alarm recording RecordingNormal recording settings Alarm recording settingsSet the alarm mode Set the pre-alarm recording time in Pre-Alarm DurationSet the PTZ camera preset Alarm recordingAlarm Input Set the recording camera for each sensor connectedEmergency Recording Setup Camera SettingLong pre-alarm recording RecordingAudio Recording Setup Set the audio recording modeAlarm area with the picture. See Operations Set the audio recording for each camera from 1 toTimer TimerSetting the program Carrying out timer recordingOverlapped timer settings ExampleMotion Det Set the reference interval timeSteps 1, 3, 4, 5 Color of the dot detecting motion changes Time/Date Setting Rear Terminal SettingSystem Menu Language SelectionCall Out Settings Key SoundBuzzer Password Setting For the disk management password Activating the Password LockReleasing the Password Lock For the levels 1 Changing the PasswordTo cancel the sequential display Camera number button operationsSplit buttons operations Sequence button operationsOperations Multiplexer Setting Output a SettingsSplit screen Single sequential screen Sequence SingleOutput B Settings Alarm Display Setting Set the covert camera setting for each camera numberCovert Camera Setting Select output a or output BOn Screen Display Setting On Screen InformationClock CameraAudio Setting Monitor Output AdjustRecorder Title Reset to Factory Setting This item is used to reset the menu settingsMenu Data Load Menu DataSave Menu Data XGA Monitor Settings Select the display mode of the XGA outputSelect the sharpness setting OptionRS-232C Setting RS-485 Cascade SettingLAN B Communication Setting LAN a NAS Setting LAN a Address SettingSelect Return in the screen of LAN a NAS Setting Device InformationPTZ Setting PTZ Camera ConfigurationConfiguration Check List Service Info System Log ListElapsed Operating Time Disk InformationRestore Set the camera number to be restoredSet the other detailed settings Memory Add/Remove HDD DeviceInternal HDD External HDDAttaching the HDD and setting the ID number Scsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5Data Management Setting for Main Memory Main Device Repeat SettingsChange Partition Setting Add/Remove DVD/CD DriveRecording Data Readout Setting Playback Device Repeat SettingImage Originality Check Play Auto-Expire on Specified DateData Clear Main Storage MemoryCopy 1/Copy Deleting the data of the DVD takes about 30 or 40 minutesOther convenient functions CascadeTo control the other recorder, repeat steps 1 and 2 above Various playback functions Playback the latest recorded contents Changing playback intervalsSimultaneous playback during recording Triplex playbackRegistering the picture Registering a book markPicture copy Functions of the unit in case of power failure Power failure compensation circuitPower failure reset recording System Log List. SeeOperation examples Operation examplePerforms alarm recording at the specified recording rate Settings Alarm area settings seeSet the normal and alarm recording areas Repeat recording settings seeMotion detection settings see pages 58 Set the motion detection settings for Motion BTimer recording settings see pages 56 Set the timer program number to ProgramSet the motion detection settings for Motion a and Motion B Active Monday Friday Basic operations Basic multiplexer functionsDigital Zoom button Split screen buttonsBasic manual recording Basic playback Repeatedly. SeeTo change the playback device To stop playback, press the Stop buttonBasic search Search by Time and DateSearch by Alarm List 100Login Communications by Web Browser101 Communications by Web Browser102 Main Menu103 Live Monitoring104 PlaybackTime Search Select the date and time and click SearchAlarm List Search Configuration Menu105 Image SearchWhen you have selected cancel If you have selected cancel106 Mail Setup 107Recorder Title & Camera Titles Select change and left-clickNAS Setup Select NAS Setup and left-clickClock Setup 108Change Login User 109Logout Close the Web BrowserRecording time table 110Continuous recording time table Without audio recording111 Troubleshooting 112113 Others114 Countermeasure Log number output115 Call OUTSetup Menu 200 000 Recording Set Recording Pattern a Normal/TimerCheck sheet 116117 Check sheetSet Recording Pattern B Timer 118119 Set Recording Pattern C Timer 120121 Set Recording Pattern D Timer 122123 Emergency Recording Setup Audio Recording SetupTimer Configure Timer Program 124Default 125Define Holidays Motion DetRear Terminal Setting Password Setting126 System Menu Language SelectionMultiplexer Setting Output a Settings127 Sequence MultiOutput B Settings Alarm Display Setting Output SettingAlarm Display Setting Output a 128Alarm Display Setting Output B Covert Camera Setting129 On Screen Display Setting Audio Setting130 131 System Menu 300 000PTZ Setting PTZ Camera Configuration 132Port Pan Device ID133 Memory Add/Remove HDD DeviceSelect using for Copy1 or Copy2 134Add/Remove DVD/CD Drive Data Management Setting for Main Memory Recording Data Readout Setting135 Glossary 136Glossary 137 GlossarySpecifications Specifications138 872C355B2
Related manuals
Manual 40 pages 7.44 Kb Manual 8 pages 45.69 Kb
Top Page Image Contents