Mitsubishi Electronics DX-TL5000U Normal recording settings, Estimated Recording Time

Page 56

Recording (continued)

Setup Menu

(Normal recording settings)

step1. Follow the steps 1 and 2 on page 97 to set the recording camera, frame or field recording, recording rate, and picture grade for normal recording.

•After executing the camera check, the recording setting is made only for the camera numbers with the video signal input when using auto or easy setting.

<Estimated Recording Time>

•The continuous recordable time depending on the recording rate and the recording picture grade of normal recording is displayed as <Estimated Recording Time> on the bottom of the preview screen for normal recording.

•When the main device is partitioned, <Estimated Recording Time> shows the estimated recordable time for normal recording.

(Alarm recording settings)

step2. Set the frame or field recording, maximum recording rate per camera, and picture grade for alarm recording.

Easy: Sets the frame or field recording, maximum recording rate per camera, and picture grade for alarm recording to the same settings for all the camera numbers. When the recording rate is set to “– – –” for all the camera numbers, this disables alarm recording. Set the desired settings and then select “Execute.”

•The preview screen appears automatically when the easy setting is executed.

Manual: Sets the frame or field recording, maximum recording rate, and picture grade for alarm recording individually for each camera number. When setting “– – –” for the recording rate, recording is disabled for that camera number.

•Select “View” and display the preview screen to check the settings you have set.

•The recording rate to be set for normal and alarm recordings are the maximum number of frames. The number may decrease depending on the number of cameras used for recording.

•The field recording and frame recording can be mixed. However, when the total number of fields and frames becomes nearly 240, the recording may not follow the setting. The priority of the recording rate setting is, frame recording > field recording > large recording rate > small recording rate > small camera number > large camera number.

•Make sure to check the settings in the preview screen after making the recording settings.

•When the picture is recorded at the maximum recording rate, a picture from the camera without recording cannot be checked through communication.

•When setting the frame recording, the recording rate display in the preview screen turns green.

•The recording rate display in the preview screen turns red when the value exceeds 240 pps in total.

step3. Select motion detection recording.

Alarm: Starts alarm recording when the motion is detected.

Normal: Starts normal recording when the motion is detected. The recording is executed at the picture grade and the recording rate set for normal recording. The recording is not registered in the alarm list.

step4. Set the alarm mode.

Alarm CH: When alarm signal is input, performs alarm recording only by the cameras set for alarm recording. When there is an input of alarm signals from multiple sensors, alarm recording is performed by all the cameras to which alarm signals are input. Alarm Plus: When an alarm signal is input during normal recording, performs alarm recording by the camera and the recording rate set for alarm recording while all the other cameras perform recording at the normal recording rate. The available recording rate for alarm and normal recordings is up to 240 pps in total.

step5. Set the pre-alarm recording time in “Pre-Alarm Duration.”

0 sec: Does not execute the pre-alarm recording.

•The pre-alarm recording time display turns red when the actual pre-alarm recording time becomes shorter than the set time depending on the alarm recording settings.

•When the pre-alarm recording time setting exceeds the maximum pre-alarm recordable time, the pre- alarm recording time display turns red. Set the time within the maximum recordable time. You can adjust the recording rate or picture grade for adjusting the pre-alarm recording time. Even if the time is set exceeding the maximum recordable time, the actual pre-alarm recording is performed for the maximum recordable time.

•When the alarm area is set, the alarm recording and pre-alarm recording are made in the alarm area. To playback the recorded data, set the <Select Source Device> to “Alarm.”

•In the case that the alarm recording mode for pre- alarm recording is set to “Alarm CH,” recording with all the camera numbers set for alarm recording may not be possible when pre-alarm recording is carried out during normal recording.

•To perform the pre-alarm recording by all the camera numbers set for alarm recording:

i)To perform with normal recording:

Set all the desired cameras for normal recording. Pre-alarm recording is performed at the picture grade and the recording rate set for normal recording.

ii)To perform with normal and alarm recordings: Set the “Alarm Mode” to “Alarm Plus.”

(Normal recording) Set all the desired cameras for normal recording. Pre-alarm recording is performed at the picture grade and the recording rate set for normal recording.

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

52

Page 55 Page 57
Image 56
Page 55 Page 57
Contents DX-TL5000U Page Avertissement BeginningImportant safeguards IiiDamage requiring Service Replacement PartsSafety Check ServicingUnplug the Power Cord During a Long Absence Recordable time and product warranty Installation Location and Handling Beginning Features Beginning Contents System Menu 74-7680-83 85-89Flowchart Flowchart for connection and settingsSetting the motion detection Setting the timer recordingTimer recording is executed and completed Searching the recorded dataMajor operations and their functions Busy indicator DET DOT ON/OFF/M-DET Area SET UP Camera Number 9Camera control buttons Output A/B buttonPower button Analogue Output connectorsSET UP button Timer buttonMain switch AC power socketCamera connectors Video Cascade connectorsAlarm in terminals Alarm OUT terminalsReset button 16. RS485 IN/OUT connectorsConnections Connecting to Cctv camera, monitor, and sensorConnections Alarm recording connection Cascade connection Keyboard DX-KB5UEPrecautions for attaching or removing the HDD Attaching or removing the HDDWhen removing a HDD Remove the metal partDisconnect the cables Remove the front covers Remove the HDD trayFix the metal part with four screws Attach the front covers When attaching a HDDAttach the new HDD onto the HDD tray with four screws Page Connecting to an analogue video cassette recorder Clamping the cablesAttaching the optional board Optional itemsRecommended items How to set the menus Setting the menusSetting the menu using a mouse Setting a mouse Setting a menu with a mouseSelecting an item Displaying a menu screenClosing a menu screen Using the front buttons of the unit Using a mouseSetting parameters For some items, more detailed setting is requiredSymbols in the menus Address number using the front buttons of the unitSetup Wizard Setup WizardSetup wizard is displayed when the unit is turned on For the first time. The Wizard enables a quick setupSet the HDD configuration When selecting Partition Set the desired partition capacitySelect whether or not to make the recording settings When selecting NextMenu chart Menu chartMenu chart FunctionsAudio ExitMenu chart Functions Pages RecordingEasy + D Set 213 2ED Exit Exits the Recording menu Multiplexer Setting Option COM/LAN Functions Pages Service Info Data Clear Functions Pages NextMemory Search Search by Motion Set the motion detection conditions for playbackSelect Search Operations Steps 1, 2Select Other settings and then set the detailed settings CopyCopy Data to Copy 1 Drive/Set Copy 1 Drive Copy Data to Copy 2 Drive/Set Copy 2 DriveCopying the data of this unit to a video cassette Set the start time of copyPlayback software System requirementsStarting up the application software Operational panelSearch menu Operation menuBookmark menu View menuInformation/Audio InformationAudio Main deviceProtect Data Protect DataSet the start and end points of the data to be locked See page 88 for registering a book mark Select ProtectPTZ Control PTZ control using the menuPTZ control using the front panel buttons Settings concerning normal recording and alarm recording Set Recording Pattern a Normal/Timer to D TimerPre-alarm recording RecordingNormal recording settings Alarm recording settingsSet the alarm mode Set the pre-alarm recording time in Pre-Alarm DurationSet the PTZ camera preset Alarm recordingAlarm Input Set the recording camera for each sensor connectedEmergency Recording Setup Camera SettingLong pre-alarm recording RecordingAudio Recording Setup Set the audio recording modeAlarm area with the picture. See Operations Set the audio recording for each camera from 1 toTimer TimerSetting the program Carrying out timer recordingOverlapped timer settings ExampleSteps 1, 3, 4, 5 Motion DetSet the reference interval time Color of the dot detecting motion changes Time/Date Setting Rear Terminal SettingSystem Menu Language SelectionBuzzer Call Out SettingsKey Sound Password Setting For the disk management password Activating the Password LockReleasing the Password Lock For the levels 1 Changing the PasswordTo cancel the sequential display Camera number button operationsSplit buttons operations Sequence button operationsOperations Multiplexer Setting Output a SettingsSplit screen Single sequential screen Sequence SingleOutput B Settings Alarm Display Setting Set the covert camera setting for each camera numberCovert Camera Setting Select output a or output BOn Screen Display Setting On Screen InformationClock CameraRecorder Title Audio SettingMonitor Output Adjust Reset to Factory Setting This item is used to reset the menu settingsSave Menu Data Menu DataLoad Menu Data XGA Monitor Settings Select the display mode of the XGA outputSelect the sharpness setting OptionRS-232C Setting RS-485 Cascade SettingLAN B Communication Setting LAN a NAS Setting LAN a Address SettingSelect Return in the screen of LAN a NAS Setting Device InformationConfiguration Check List PTZ SettingPTZ Camera Configuration Service Info System Log ListElapsed Operating Time Disk InformationSet the other detailed settings RestoreSet the camera number to be restored Memory Add/Remove HDD DeviceInternal HDD External HDDAttaching the HDD and setting the ID number Scsi ID0 Scsi ID1 Scsi ID2 Scsi ID3 Scsi ID4 Scsi ID5Data Management Setting for Main Memory Main Device Repeat SettingsChange Partition Setting Add/Remove DVD/CD DriveRecording Data Readout Setting Playback Device Repeat SettingImage Originality Check Play Auto-Expire on Specified DateData Clear Main Storage MemoryCopy 1/Copy Deleting the data of the DVD takes about 30 or 40 minutesTo control the other recorder, repeat steps 1 and 2 above Other convenient functionsCascade Various playback functions Playback the latest recorded contents Changing playback intervalsSimultaneous playback during recording Triplex playbackPicture copy Registering the pictureRegistering a book mark Functions of the unit in case of power failure Power failure compensation circuitPower failure reset recording System Log List. SeeOperation examples Operation examplePerforms alarm recording at the specified recording rate Settings Alarm area settings seeSet the normal and alarm recording areas Repeat recording settings seeMotion detection settings see pages 58 Set the motion detection settings for Motion BTimer recording settings see pages 56 Set the timer program number to ProgramSet the motion detection settings for Motion a and Motion B Active Monday Friday Basic operations Basic multiplexer functionsDigital Zoom button Split screen buttonsBasic manual recording Basic playback Repeatedly. SeeTo change the playback device To stop playback, press the Stop buttonBasic search Search by Time and DateSearch by Alarm List 100Login Communications by Web Browser101 Communications by Web Browser102 Main Menu103 Live Monitoring104 PlaybackTime Search Select the date and time and click SearchAlarm List Search Configuration Menu105 Image Search106 When you have selected cancelIf you have selected cancel Mail Setup 107Recorder Title & Camera Titles Select change and left-clickNAS Setup Select NAS Setup and left-clickClock Setup 108Change Login User 109Logout Close the Web BrowserRecording time table 110Continuous recording time table Without audio recording111 Troubleshooting 112113 Others114 Countermeasure Log number output115 Call OUTSetup Menu 200 000 Recording Set Recording Pattern a Normal/TimerCheck sheet 116117 Check sheetSet Recording Pattern B Timer 118119 Set Recording Pattern C Timer 120121 Set Recording Pattern D Timer 122123 Emergency Recording Setup Audio Recording SetupTimer Configure Timer Program 124Default 125Define Holidays Motion DetRear Terminal Setting Password Setting126 System Menu Language SelectionMultiplexer Setting Output a Settings127 Sequence MultiOutput B Settings Alarm Display Setting Output SettingAlarm Display Setting Output a 128129 Alarm Display Setting Output BCovert Camera Setting 130 On Screen Display SettingAudio Setting 131 System Menu 300 000PTZ Setting PTZ Camera Configuration 132Port Pan Device ID133 Memory Add/Remove HDD DeviceAdd/Remove DVD/CD Drive Select using for Copy1 or Copy2134 135 Data Management Setting for Main MemoryRecording Data Readout Setting Glossary Glossary136 137 Glossary138 SpecificationsSpecifications 872C355B2
Related manuals
Manual 40 pages 7.44 Kb Manual 8 pages 45.69 Kb
Top Page Image Contents