Mitsubishi Electronics DX-TL5000U instruction manual How to set the menus, Setting the menus

How to set the menus

Setting the menus

The operations of this unit can be set via a menu displayed on OUTPUT A monitor. You can select and set the operational conditions by using the buttons on the front panel or using a USB mouse connected to the unit. When using the front panel buttons, the numbers 1-16 (camera number buttons) and letters A to E (SPLIT screen buttons) represent the GUI button of the menu screen.

•The menu can only be displayed through OUTPUT A monitor. The menu cannot be displayed through OUTPUT B monitor.

Setting the menu using a mouse

•Setting a mouse

step1. Attach the supplied ferrite core to the cable of the mouse as illustrated to the left.

•Setting a menu with a mouse

Left button

Wheel

Right button

step1. Use the left and right mouse buttons to set the menu.

•Click the left button to open the menu or select a needed item, etc.

•Click the right button to select the active area

for motion detection function. ( See pages 58 and 59.)

•The wheel on a mouse does not work with this unit.

Mouse

Setting the menu using the front panel buttons

step1. Use the SET UP button, camera number buttons, and the SPLIT screen buttons (A to E) to set the menu.

	• Press the SET UP button to display the menu
	screen.
	• Press the camera number buttons (1 to 16) and
	the SPLIT screen buttons (A to E) to open each
M-DET	menu or select the needed item.
DOT ON/OFF
M-DET
AREA SET UP

••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••

26