JVC RK-LP55U manual Factory Preset of Mode Settings, Mode Factory preset, SC Fine, System Reset

FACTORY PRESET OF MODE SETTINGS

●The default values (factory preset) for each of the RM-LP55’s modes are shown below.

Mode	Factory preset	Mode	Factory preset
CAM MODE	CAM	RANDOM TRIGGER	OFF
CONTOUR	ON	HI-RESO	OFF
CONTOUR LEVEL	0	SHUTTER	NORMAL
SC COARSE	0°	V.SCAN	1/60.0 (U-ver.)
SC FINE	0		1/50.0 (E-ver.)
H.PHASE	0	SLOW	1 FRM
GAMMA	ON	GAIN MODE	0 dB
IRIS DETECT	NORMAL	WHITE BALANCE	AUTO1
TITLE	OFF	PAINT	OFF
TITLE POSITION	1	-	-

Any setting data which is currently displayed on the LCD can be reset to the default value (shown in the table above) by pressing the FUNC1 and buttons C or the FUNC2 and buttons D simultaneously.

You can also simultaneously reset all settings to the default values as described in the next section.

System resetting method

●While pressing the MENU and buttons B simultaneously, set the OPERATE switch to ON.

●ASYSTEM RESETB appears on the display, then the unit returns to its normal operating state.

SYSTEM RESET

●System resetting does not affect scene files (A and B) or current camera settings.

●AUTO IRIS LEVEL, ALC IRIS SET and CAMERA TYPE settings cannot be reset by the system resetting, (AREMOTE CONTROLLER OPERATION MODE SETTINGSB (A pg. 18)).

While pressing these

simultaneously, set

OPERATE to ON.

MENU

E-20