oTITLE DISPLAY (ON/OFF)
●Set to ON if you want a title display on the monitor screen. Set to OFF If you don’t.
1.Press MENU button B to select Menu item A7: TITLEB.
7 : TITLE
OFF
Mode indication
2.Press FUNC2 button D to set the mode to ON or OFF.
Sets ON/OFF.
FUNC2
oTITLE EDIT
Refer to a monitor TV when editing the title.
●To register or correct the title that will be displayed on the monitor TV.
1.Press MENU button B to select Menu item A8: TITLE SETB.
8 : TITLE SET EDIT
2.Press FUNC2 button D to set the mode to
AEDITB.
Selects AEDITB.
FUNC2
4.Press FUNC1 button C to move the cursor in the title window to select the character to be replaced.
●Press 
to move the cursor right and press 
to move it left. The blinking character in the character list window changes to correspond with the
Moves the cursor in the title window. 
FUNC1
Character list | TITLE EDIT | ||
window (Characters | ABCDEFGHIJKLMNOPQ | ||
available for title |
|
| |
| |||
setting) | RSTUVWXYZ 0 1 2 3 4 5 6 7 8 | ||
|
|
| 9 . , : ?<>!'~+ - /%& |
Title window | JVC COLOR CAMERA | ||
|
|
| |
(Preset Title) | KY - F55 TITLE SET | ||
|
|
| |
|
|
| SAMPLE DISPLAY |
|
|
|
|
|
|
| Monitor screen |
5.Press FUNC2 button D to move the cursor in the character list window to select the character to input.
●Press 
to move the cursor right and press 
to move it left. The blinking character in the title window changes to correspond with the cursor- selected letter in the character list window.
Moves the cursor in the character list window
FUNC2
ESPAÑOL ITALIANO FRANÇAIS DEUTSCH ENGLISH
3.Press ENTER/SET button E.
(1)The LCD display changes as shown in the figure below.
| Blinking | ||
|
|
|
|
|
|
|
|
TITLE EDIT |
| ||
CURSOR | CHAR |
| |
(2)The monitor screen shows two windows; the character list window and the title window. The title window displays the current title stored in the camera.
(3)The first letter in the title will be blinking together with the corresponding letter in the character list window. (A_B blinks in the blank area.)
6.To set the character, press FUNC1 button C. The cursor moves and the character in the title window is replaced by the character selected from the character list.
7.Repeat steps 4. to 6. as necessary.
8.Press ENTER/SET button E to end title setting. The title is stored in the camera’s memory.
●The LCD panel will show A8: TITLE SETB.
●ATITLE EDITB will disappear from the monitor screen; if the title display function is ON, the title will appear on the monitor screen. If the title display function is OFF, no title will appear.
NOTE:
The registered title is not stored in the remote control unit. If you connect a different camera, you’ll have to set the title again.