Runco LS-3, LS-5 operation manual Status

Serial Communications

Table 6-2. Serial Commands (continued)

Operation Commands Values Notes

status	?	0	= Standby
		1	= Powering Up
		2	= Displaying
		3	= Cooling Down
		4	= Error

errcode	?	Refer to RS-232 Error
		Codes, below.
msgbox	= ?	0 = On	This control enables or
		1 = Off	disables the display of
			power off, source and
			adjustment message
			boxes (brightness, con-
			trast etc.). Default value is
			ON.
cal.text1	=	Up to 30 characters.	The LS-3/LS-5 start-up
cal.text2			screen is customizable
cal.text3			with three lines of text of
			up to 30 characters each.
			This text appears below
			the “CALIBRATED FOR:”
			text in the logo screen.
			The allowable characters
			are all numbers, letters
			(uppercase and lower-
			case), spaces, and sym-
			bols available in the ASCII
			code set.

Runco LS-3/LS-5 Installation/Operation Manual 81