Connecting to Video Equipment
(such as a video disc player, a DVD player, or a video camera)
Read Usage Notes ( 3 to 6 ) carefully to ensure maximum safety before proceeding to these steps:
(1)Choose an appropriate site and install the product on a level table where the stand is secure.
Install the monitor to have ready access to a power socket available.
(2)Make sure that the monitor’s power switch is off.
The monitor is shipped with the power switch off.
(3)Make sure that the video equipment’s power switch is off.
(4)Interconnect the signal input terminal on the monitor rear panel and the video equipment’s signal output terminal to each other using an optional cable.
(5)Insert one end of the power cable included into the
If a power adapter is used, ground the grounding wire to avoid electrical shocks and radio interference. (Complete grounding before connecting the power plug to a power supply. Before disconnecting the grounding wire, be sure to disconnect the power plug from the power supply first.)
(6)Turn on the monitor, then the video equipment’s to make sure that a display image appears on the monitor screen.
For instructions on turning on the monitor and adjusting its display images, see “Operating
ENGLISH
Instructions” ( 13 to 21 ).
Monitor rear panel
Power cable
|
|
|
|
| Power cable |
|
|
|
|
|
| ToSvideo output terminals | |
|
|
|
|
| connector |
|
|
|
|
|
| ||
|
|
|
| VIDEO2 INPUT [COMPONENT] |
|
|
|
| VIDEO1 INPUT |
|
|
| |
|
| AUDIO |
|
|
| AUDIO |
|
| |||||
|
|
|
| (MONO) |
|
|
|
| (MONO) |
|
| ||
R |
|
| L | PR/CR PB/CB Y | R |
|
| L VIDEO |
| ||||
Video equipment
(such as a video disc player,
a DVD player, and a video camer)
Red(R) | White(W) | Yellow(V) | output terminals | To audio/video | output terminals | To component | Red(R) | White(W) | terminals | To audio output |
Red(R) | White(W) |
terminals | To audio input |
Red(R) | White(W) |
input terminals | To component |
Yellow(V) | intput terminals | To audio/video |
To S video input terminals
Use if the video equipment has an
S video input terminal
If video equipment with an S video input terminal is used, cabling by the S video cable is |
|
recommended to provide finer video quality. (If an S video input terminal and a video |
|
input terminal connect to the monitor at the same time, S video input would govern.) | 11 |