Hitachi CMP307XU manual Product Specifications, General Specifications

ENGLISH

PRODUCT SPECIFICATIONS

Product specifications and designs are subject to change without notice.

General Specifications

Type			CMP307XU
	Effective	Approx. 37inches, Aspect ratio 4:3 (753 mm (H), vertical 564 mm (V))
	screen size
	No. of pixels	1024 (H) x 768 (V) pixels
Plasma	Pixel pitch	0.735mm (H) x 0.735mm (V)
Display
	Display color
Panel		2,090,000 colors / 16,700,000 colors
	adjustment
	Brightness /	150cd/m2 (brightness) at white peak; 400: 1 (standard) in a dark room.
	contrast
	Viewing angle	Horizontal/vertical 160 degrees or more.
			RGB input	VIDEO input
		RGB1 input terminal : mD-Sub 15 pin x 1		VIDEO1 video input terminal : Composite video
		RGB2 input terminal : BNC x 5		RCA pin x 1
	Input	RGB audio input terminal : RCA pin (L/R) x 1		VIDEO1 S video input terminal : S VIDEO,
				S terminal x 1
	terminals			VIDEO1 audio input terminal : RCA pin (L/R) x 1
				VIDEO2 video input terminal : Composite video
				RCA pin x 3
				(Y,PB/PR,CB/CR)
Input				VIDEO2 audio input terminal : RCA pin (L/R) x 1
signals	Video signals	0.7 V/1.0 Vp, analog RGB		NTSC, 480i, 480p, 720p, 1080i
	Audio signals	L/R 470mV, high impedance		L/R 470mV, high impedance
		H/V separate, TTL level		---
	Sync signals	H/V composite, TTL level		---
		Sync on green, 0.3 Vp-p		---
Synchroniz	Horizontal	24kHz ~ 64kHz		---
ing signal
	Vertical	50Hz ~ 75Hz		---
frequency
Video clock frequency		108MHz or less		---
Color density		9300K + 6MPCD (normal)		9400K - 9MPCD (normal)
(at white peak)
Speaker output		2W+2W (EIAJ) (10cm x 3cm built-in speaker x 2)
Input power		AC100 - 120 / 200 - 240V(automatically selected) 4.3A / 2.2A
		Power consumption 390W
External dimensions		884 (W) x 684 (H)x 99.7 (D) (mm) : (excluding the stand)
		884 (W) x 766 (H)x 300 (D) (mm) : (including the stand)
Mass		29.8 kg (excluding the stand), 32.8 kg (including the stand)
Ambient	Temperature	Operating:	5˚C to 35˚C, Storage : 0˚C to 40˚C
conditions	Relative	Operating:	20% to 80%, Storage : 20% to 90% (non-condensing)
	humidity

The monitor takes at least 30 minutes to attain the status of optimal picture quality.

28 Use RGB input signals in non-interlaced mode.