Hitachi CMP307XU manual Other Features, Automatic Store, Display Registration condition

ENGLISH

OTHER FEATURES

Automatic Store

Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below.

Item	Display	Registration condition	Reproduction condition
Sound volume	VOLUME
Sound balance	BALANCE
Treble	TREBLE
Bass	BASS
Mute volume	MUTE VOLUME		During normal signal
Input status automatic display	EASY MENU	One set can be recorded.
Half tone	HALF TONE		reception.
Enlargement	INTERPOLATION
Line correction	LINE CALE
Three-dimensional Y/C separation	3D Y/C
HD signal	COMPONENT
Input select	INPUT SELECT
Brightness	BRIGHTINES	One set can be recorded
		during common RGB1, RGB2
Contrast	CONTRAST		During normal signal
		input; one set of two can be
Gamma correction	GAMMA
		recorded during normal signal	reception.
Input signal level	VIDEO LEVEL
		reception with common
Display area	DISPLAY AREA
		VIDEO 1, VIDEO 2 input.
Horizonal position	H.POSITION	One group can be recorded	During recording and
Vertical position	V.POSITION
			when the same signal
Dot clock frequency	CLOCK	for each signal mode.
			mode is detected.
Dot clock phase	PHASE

The previously recorded items will be lost.

The signal mode can be identified by the horizontal/vertical sync frequency and the sync signal polarity. Different signals with which all the elements are the same or similar will be handled as the same signal.

RGB1 and RGB2 inputs have common elements that can be recorded for each signal mode. Because of this, when the contents are recorded with RGB1 (or RGB2), there may be loss of adjustment during RGB2 (or RGB1) reception in the same signal mode.

22