Hitachi CMP307XU manual Setting an unused, Jack to Skip can, Speed, Do not select when Select when

Menu item			Selected	Adjustment			Setup hint
			characters	item
			RGB1 INPUT	RGB1 input			Setting an unused
				selection
							jack to SKIP can
				RGB2 input
			RGB2 INPUT		Sets to SKIP.	Sets to SELECT.	accelerate switching
				selection
							speed.
					Do not select when	Select when
				VIDEO1 input			In this case, the
			VIDEO1 INPUT		switching inputs.	switching inputs.
							selected jack will not
		INPUT		selection
							be displayed on the
		SELECT		VIDEO2 input
			VIDEO2 INPUT				screen.
				selection
			RGB1 SOUND	RGB1 audio	Sets to OFF.	Sets to ON.	Determination of the
	F				There is no audio	There is audio	RGB audio signal
			RGB2 SOUND	RGB2 audio	output.	output.	input jack.
	U
M							The image will move
	N		SCREEN SAVER	Burn-in reduction	Sets to OFF.	Sets to ON.	automatically to
				function			reduce burn-in. The
A
	C						amount of movement
							is set with “Moving
	T						Dots” and the move
I			MOVING DOTS	Amount of screen	Reduces the amount	Increases the amount	time is set with
				movement selection.	of movement.	of movement.	“Moving Timer” (1 -
	I
							60 min.). (Use zero
N	O						(0) to check the
							movement range.
				Movement time	Reduces the time	Increases the time
	N		MOVING TIMER				The movement time
		BURN		interval selection.	interval.	interval.	would be
		REDUCTION					approximately 1 sec.)
							Panel burn-in is
							reduced after
					Sets to OFF.	Sets to ON.	extended display of
			INVERSE	Color inversion	There is no color	There is color	still images by
					inversion.	inversion.	displaying the same
							images again with
							the colors inverted.
					Sets to YES.	Sets to NO.	Reduces panel
			WHITE	White	The Pattern menu	The display is all	residual images when
					returns.(The display	white and the Pattern	executed after
					is not all white.)	menu returns.	displaying still images.

ENGLISH

21