Power Save Mode
When the RGB input jack is selected
This unit meets the
When this unit is connected to a VESA DPMS computer, the Power Save (Standby/Suspend/Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync | Horizontal | Yes | No | Yes |
| No |
|
|
|
|
|
| |
signal | Vertical | Yes | Yes | No |
| No |
|
| |||||
|
|
|
|
|
|
|
Video signal | Active |
| Blank (no video) | |||
(normal display) |
| |||||
|
|
|
|
|
| |
|
|
|
|
|
| |
Operation mode | On |
| Off1) |
|
| |
|
|
|
|
|
| |
Display lamp | Lights green |
| Blinks green |
|
| |
|
|
|
|
|
| |
Power consumption | 390W |
| 7W or less |
|
| |
|
|
|
| |||
1) Press the MENU or SELECT button to enter sound mode. | 25 | |||||
When the Video Input jack is selected
When there is no video signal input, the
Video signal | Yes | No |
|
|
|
Operation mode | On | Off1) |
|
|
|
Screen display | Normal display | Blank (no video) |
|
|
|
Display lamp | Lights green | Blinks green |
|
|
|
Power consumption | 390W | 7W or less |
|
|
|
1) Press the MENU or SELECT button to enter sound mode. 25
Sound Mode
If you press the MENU mode while the monitor has power save mode 25 turned off, sound output is enabled by cancelling the off setting of power save mode.
The Easy Menu shown to the right appears on the screen when the sound mode is selected.
After approximately 5 sec., the brightness of the | Remote | SOUND MODE | |
Easy Menu lowers and display continues until the | |||
controller | |||
sound mode is canceled. | MENU |
| |
|
| ||
In sound mode, sound volume can be adjusted. |
|
|
Press the MENU button to cancel sound mode.
The power save mode 25 is activated when this mode is canceled.
When an input signal is present, the sound mode is canceled automatically, the On mode is activated and the input signal is displayed.
ENGLISH
25