On-Screen Display System, EasyMenu, Brightness

ENGLISH

OPERATING INSTRUCTIONS (continued)

On-Screen Display System, EasyMenu

Press the MENU button to open an adjustment menu allowing you to complete various

adjustments and settings using the SELECT buttons (remote controller , , , and keys, or the set SELECT key).

Pink

Press the SELECT buttons (remote controller

and	keys) to move the pink marker to
select an item.

Press the VOLUME button and the ▲ and ▼

keys of the main unit ( or key of the remote control) to adjust or set the selected item, or to switch the menu.

When a choice is followed by “:”, it indicates that the choice can be adjusted or changed.

When a choice is followed by ▲, a menu can be opened

by pressing the remote-controller SELECT button or the set VOLUME button ▲.

When [RETURN] is selected, press the remote-

controller button SELECT or the set VOLUME button ▼ to exit to the original menu

For information on adjusting and setting choices, see 17 to 21 .

Remote

controller

SELECT

Set unit

SELECT

[ VOLUME ]

MAIN MENU

PICTURE

SOUND

DISPLAY

FUNCTION

Menu selection mark

Pink when brightness is selected

PICTURE MENU

CONTRAST	:117
BRIGHTNESS	: 0

COLOR SELECT:NORMAL COLOR BALANCE OPTIONS

RETURN

Guidance

Press the MENU button once again to exit the adjustment menu.

The adjustment menu will close automatically when no keys are entered for 10 seconds.

HINTS

■Burn-in (residual image) can occur if the same image is displayed for an extended time. To reduce this possibility, change the display contents at suitable intervals. To reduce this, it is recommended that you either change the display contents at an appropriate interval or use the Burn In function 18 .

■If special images created on a PC or any other equipment (such as those composed of a checker-flag pattern) are displayed across the screen, the hue may be varied depending on the contrast or brightness setting.