Hitachi CMP307XU manual Contrast Adjustment, Sound Mute, Input Signal Status Display

Contrast Adjustment

While the on-screen display system, EasyMenu 16 , is not on display, press the remote

controller SELECT button or to adjust the contrast.

When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical

(V)frequencies of the input signal will be displayed in a guidance image.

While the guidance is on display, press the key to narrow the difference between darkness and brightness.

While the guidance is on display, press the key to widen the difference between darkness and brightness.

You can also adjust the contrast setting via the on- screen display system, EasyMenu 16 .

The contrast adjustment mode will exit when no keys are entered for 5 seconds. (The adjustment status guidance will disappear automatically.)

	Contrast setting
Remote
controller	CONTRAST : 100
SELECT
	H :* *. * kHz, V :* *. * Hz

Input horizontal	Input vertical
frequency	frequency

Adjustment status guidance

ENGLISH

Sound Mute

Press the remote controller MUTE button to mute the sound temporarily.

When you press the button, [MUTE] (pink) and the status				Sound volume setting
of volume setting will be displayed in a guidance image.		Remote
While the sound is muted, press the	button to turn down the
		controller		MUTE	: 30
volume.			MUTE

While the sound is muted, press the button to cancel the mute.

You can also adjust the sound volume setting of the mute

via the on-screen display system, EasyMenu 16 . (The display will turn to pink.)

Press the remote controller MUTE button once again and the mute will be canceled and the guidance will change to VOLUME (blue), enabling the volume to be heard.

When MUTE is used, the guide display will continue for 5 sec. and then turn off. The set itself does not have a MUTE button.

Input Signal Status Display

Press the remote controller RECALL button to display the status of input signals on the screen. Press the remote controller RECALL button once again to exit the screen display.

The contrast adjustment mode will exit when	Remote
no keys are entered for 5 seconds.
The set itself does not have a RECALL button.	controller
		RECALL

Input terminal name

RGB1 [D-SUB]

H : 46.5kHz, V : 60Hz

Input horizontal	Input vertical
frequency	frequency

15