INSTALLATION INSTRUCTIONS
Standard accessories
●This product is complete with the display monitor, plus the accessories shown below. 
If any of these accessories is missing, please contact your dealer.
CMP307EU | USER MANUAL |
MANUEL UTILISATEUR |
Instruction manual | |
(this book) | transmitter |
|
| M4 screw x 2 |
Size AA | Signal cable, mini- | Hook x 2 |
Power cable | ||
batteries x 2 |
|
ENGLISH
Read the instruction manual (this book) and the warranty card carefully and keep them in a safe place for handy reference. 
Retain the packing materials for use in future shipping or relocation.
Installation
●To preserve the performance of this product and to maintain safety, always use one of the special mount units for installation.
Special mount units (options): Wall Mount Unit (CMPAK04), Ceiling Mount Unit (CMPAT04)
■Use one of the special mount units to install this product. A mount of insufficient strength or inadequate design can cause overturning or dropping and result in fire, electrical shock or injury.
Please note that this company assumes absolutely no responsibility for personal injuries or property damage caused by use of other mount units or improper installation.
■Installation of the wall mount unit and ceiling mount unit can be dangerous, so do not attempt this work yourself. Ask your dealer to provide the name of a qualified installer.
■ In order to prevent an internal temperature increase, maintain a space of 10cm or more between the sides and other objects such as walls, etc., so that the ventilation holes are not blocked.*
Anti-tumble measures
■Have this unit mounted in a stable place. Take measures to prevent it from tumbling down to
avoid possible physical injury.
Securing to a wall or post
1)Using M4 screws (two), fasten the hooks included to the screw holes at both ends of the top of the rear of the set as shown.
2)Using a commercially available cord, chain and clamp, secure the set to a firm wall or post.
Screw
Hook
Cord or Chain
10cm or more*
Clamp
Cord 
or
chain
Securing desktop
1)Using wood screws (two), fasten the set to the clamping screw holes on the rear of the stand as shown.
2)Using commercially available wood screws, secure the set firmly in position.
Wood screw 
Two places
7