Magnavox TB110MW9 Before Using, Important Safeguards, Risk Of Electric Shock Do Not Open

Page 2
Before Using

RISK OF ELECTRIC SHOCK Before Using

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The caution marking is located on the bottom of the cabinet.

THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTENANCE INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

Important Safeguards

1.Read instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and use instructions should be followed.

5.Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5.

6.Attachments - Do not use attachments not recommended by this product manufacturer as they may cause hazards.

7.Water and Moisture - Do not use this product near water-for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like.

8.Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table.

This product may fall, causing serious injury to someone, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with this

product. Any mounting of the appliance

should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.

AMEUBLES - Cet appareil ne doit être placé que sur un meuble (avec ou sans roulettes) recommandé par le fabricant. Si vous l’installez sur un meuble à roulettes,

déplacez les deux ensembles avec précaution. Un arrêt brusque, l’utilisation d’une force excessive et des surfaces irrégulières risquent de déstabiliser l’ensemble et de le renverser.

9.Ventilation - Slots and openings in the cabinet and the back or bottom are provided for ventilation and to ensure reliable operation of this product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing this product on a bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation such as a bookcase

or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.

10.Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For this products intended to operate from battery power, or other sources, refer to the operating instructions.

11.Grounding or Polarization - This product is equipped with a polarized alternating-current line plug(a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

12.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

13.Outdoor Antenna grounding - If an outside antenna or cable system is connected to this product, be sure the antenna or cable system is grounded so

as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead- in wire to an antenna discharge unit, size of grounding

2

EN

Page 1 Page 3
Image 2
Page 1 Page 3
Contents TB110MW9 INSTRUCCIONES EN ESPAÑOL INCLUIDASTHAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE DTV Digital to Analog Converter Set Top BoxRISK OF ELECTRIC SHOCK DO NOT OPEN Before UsingImportant Safeguards Dealer Phone No Before UsingINSERT Model NoLocation PrecautionsInstall the product in a horizontal position Avoid the Hazards of Electrical Shock and FireT a b l e o f C o n t e n t s Before UsingInitial Setup Setup Wizard Advanced OperationConexión a un TV con tomas de A/V OverviewConexión a un TV sin tomas de A/V Conexión a una caja de cableCheck the following accessories when unpacking the STB AccessoriesInstalling Batteries 1 Unsnap the battery cover from theUbicación del control Remote ControlLocation of Controls 2 Number buttons 3 OK buttonFront Panel 1 Remote control sensor 2 POWER indicator1 AC power cord Rear PanelConnections A Connecting to a TV without A/V JacksB Connecting to a TV with A/V Jacks white red yellowwhite C Connecting to a Cable Box OptionalNote to the Cable TV System Installer y ellowred yellow D Connecting to Other DevicesConexión a otros dispositivos on the STB to the audio input jack on the DVD1 Press STANDBY-ON on the remote control to activate the STB Initial Setup Setup WizardInitial Setup ”SETUP WIZARD” screen automatically appears6 Select your time zone using K / L, then press OK 3 Select “CONTINUE” using s / B, then press OK4 Select the language using K / L, then press OK 9 Select “AUTOSCAN” using K / L, then press OKIf the sub-channel number is 1 digit, press OK when finish entering using CH K / LIf the main channel number is 1 digit, press . when finish entering “NO SIGNAL” appears after the sub-channel broadcast is overPress STILL To cancel still modePress AUDIO repeatedly Choosing Audio LanguagePress DISPLAY 2 Select the desired program using s / Bprovide signals for “EPG” 1 Press EPG while watching TV4 Select “AUTOSCAN” using K / L, then press OK 1 Press SETUP 2 Select “CHANNEL” using K / L, then press OK3 Select “AUTOSCAN” using K / L, then press OK 1 Press SETUP5 Press OK again to add the channel to the channel map 6 Press SETUP to exit4 Select “DELETE” using K / L, then press OK Operation4 Select “ANTENNA” using K / L, then press OK Adjusting Antenna2 Press SETUP 3 Select “CHANNEL” using K / L, then press OK 1 Press SETUP 2 Select “DETAIL” using K / L, then press OK3 Select “TIME ZONE” using K / L , then press OK Setting the Time Zone and D.S.T Daylight Saving Time1 Press SETUP 2 Select “TIME” using K / L , then press OK 4 Select your time zone using K / L , then press OK1 Press SETUP 2 Select “DETAIL” using K / L , then press OK 3 Select “D.S.T” using K / L , then press OK4 Select “ON” or “OFF” using s / B , then press OK 3 Select “V-CHIP” using K / L , then press OKK / L , then press OK repeatedly to switch between view and block 5 Select the desired rating type using K / L , then press OK6 Select the desired rating using MPAA Rating5 Select “NEW PASSWORD” using K / L , then press OK 7 Press SETUP to exit4 Enter 4737 in the password entry field 6 Enter the new 4-digit password using the Number buttons4 Select the desired closed caption item using K / L , then press OK 5 Select “MANUAL” using K / L , then press OK3 Select “CLOSED CAPTION” using K / L , then press OK 5 Select the desired DTV closed caption using K / L , then press OK4 Select desired amount of time using K / L , then press OK Auto Power Down3 Select “AUTO POWER DOWN” using K / L , then press OK You cannot view Analog TV with this setting You can view analog TV by switching “RF OUT” settingYou cannot view Digital TV with this setting Viewing Analog TV2 Select “RF THROUGH” in “RF OUT” You can view analog TV without switching “RF OUT” settingMethod 2 Método 3 Select the desired channel on your TV2 Select “CHANNEL” using K / L, then press OK Setting RF OUTUsing SETUP to Switch “RF OUT” Setting 3 Select “RF OUT” using K / L, then press OKto the remote control TroubleshootingNo power Low volumePower Source SpecificationsConnecting Jacks ANT. IN/OUT Power ConsumptionFUNAI SERVICE CORPORATION LIMITED WARRANTYWARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS Customer Service
Top Page Image Contents