2. Controls and Functions
Figure 2-1, Figure 2-2 and Figure 2-3 show the locations of the CinemaWall controls, indicators and connectors.
2.1 CinemaWall at a Glance
Controls and Indicators
Located on bottom of Plasma
VOLUME |
|
|
| INPUTSELECT |
MENU / ENTER DOWN | UP | LEFT/- | RIGHT/+ | /EXIT |
Located on bottom of Plasma
7 | 6 | 5 | 4 | 1 | 3 | 2 |
Figure 2-1. CinemaWall Controls and Indicators
1.POWER BUTTON
Turns the monitor’s power on and off.
2.REMOTE CONTROL SENSOR
Receives the signals from the remote control.
3.POWER/STANDBY INDICATOR
-Lights red to indicate that the CinemaWall is in standby mode;
-Lights green to indicate normal operation;
-Flashes red to indicate that the internal temperature is too high.
4.INPUT SELECT/EXIT
Press this button to switch inputs, or exit the current menu if an
Runco CinemaWall Owner’s Operating Manual | 5 |