Runco CW-50XA, CW-61, CW-42HD manual Function, Power Turning Management

Operation

Function ➤

FUNCTION

AUTO OFF	:	OFF
INPUT SKIP	:	OFF
PDP PROTECT	:	AUTO
CC	:	OFF

CCCONTRAST : LEVEL 1 LAST MODE ADVANCED OSD : OFF

SEL. ADJ. EXIT RETURN

Select Function from the Main menu to configure advanced CinemaWall features such as power management, pixel protection, closed captioning and others.

Note	You must set the Advanced OSD option to ON to see all of the
	options in the Function menu.

Auto Off: When using the CinemaWall with a computer, select Auto Off from the Function menu and set it to ON. The Auto Off (power management) function automatically reduces the monitor’s power consumption after a period of no input from the keyboard or mouse.

Note	1. If the computer is turned off or not properly connected to the
	CinemaWall, the system is set to the off state.

2.For instructions on using the computer's power management features, refer to the instructions for your computer.

The POWER/STANDBY LED at the front of the CinemaWall indicates the status of the power management function, as described in Table 4-2.

Table 4-2. Power Management Indications

Power	POWER/	Power		Turning the
management	STANDBY	management	Description
				picture back on
mode	Indicator	operating status
ON	Green	Not activated.	Horizontal and	Picture already on.
			vertical
			synchronizing
			signals are present
			from the
			computer.
OFF	Red	Activated.	Horizontal and/or	Press a key on the
			vertical	keyboard or move
			synchronizing	the mouse. The
			signals are not	picture reappears.
			present from the
			computer.

Input Skip: This setting affects the behavior of the INPUT SELECT button on the CinemaWall.

When Input Skip is set to ON, pressing INPUT SELECT allows you to choose only those inputs on which a valid signal is present. The other inputs are skipped.

38 Runco CinemaWall Owner’s Operating Manual