Runco CW-50XA, CW-61, CW-42HD manual Three Year Limited Warranty, For Plasma Displays

Page 3

THREE YEAR LIMITED WARRANTY

For Plasma Displays

Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products.” With proper installation, setup and care, you should enjoy many years of unparalleled video performance.

This is a LIMITED WARRANTY as defined in the Magnuson-Moss Warranty Act. Please read it carefully and retain it with your other important documents.

WHAT IS COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

SERVICE LABOR: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a manufacturing defect for a period of three (3) years from the effective date of delivery to the end user (excluding the plasma glass panel).

PARTS (not including plasma glass panel): Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of three (3) years from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

PLASMA GLASS PANEL: Runco will pay for service labor by a Runco Authorized Service Center when needed as a result of a manufacturing defect for a period of one (1) year from the effective date of delivery to the end user. In addition, Runco will provide new or rebuilt replacement parts for the parts that fail due to defects in materials or workmanship for a period of one (1) year from the effective date of delivery to the end user. Such replacement parts are then subsequently warranted for the remaining portion (if any) of the original warranty period.

WHAT IS NOT COVERED UNDER THE TERMS OF THIS LIMITED WARRANTY:

Image burn-in on plasma display panels is specifically excluded from coverage under this Limited Warranty. Image burn-in is the result of misuse of the product and therefore cannot be repaired under the terms of this Limited Warranty.

Normal viewing material such as television/satellite broadcasts, videotape or DVDs (not put into pause for extended periods of time) will not cause damage to your display under normal conditions. Many DVD players are also equipped with screen savers for this reason.

TO AVOID IMAGE RETENTION (Burn-in):Please ensure that still images are left on your plasma display panel for no more than a few minutes. Also ensure that images displayed in the 4:3 aspect ratio mode (black or gray stripes, but no picture information is present on the left and right edges of the screen) are used as infrequently as possible. This will prevent permanent image burns on your plasma display panel, which can be seen permanently under certain conditions once burn-in has occurred.

The types of images to avoid include video games, still images and computer screens with stationary tool bars and icons. (This is why computers are equipped with screen savers – to prevent still images from burning into the monitor’s phosphors after being displayed continuously for an extended period of time).

This Limited Warranty only covers failure due to defects in materials and workmanship that occur during normal use and does not cover normal maintenance. This Limited Warranty does not cover cabinets or any appearance items; failure resulting from accident, misuse, abuse, neglect, mishandling, misapplication, faulty or improper installation or setup adjustments; improper maintenance, alteration, improper use of any input signal; damage due to lightning or power line surges, spikes and brownouts; damage that occurs during shipping or transit; or damage that is attributed to acts of God. In the case of remote control units, damage resulting from leaking, old, damaged or improper batteries is also excluded from coverage under this Limited Warranty.

Runco CinemaWall Owner’s Operating Manual

iii

Image 3
Contents CW-42HD CW-50XA Page For Plasma Displays Three Year Limited WarrantyRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC DOC Compliance Notice Safety PrecautionsTable of Contents Serial Communications Maintenance and TroubleshootingSpecifications OperationList of Figures List of Figures About This Manual IntroductionIf you need Turn to Using This ManualKey Features and Benefits Description, Features and BenefitsOptional Accessories Controls and Indicators Controls and FunctionsCinemaWall at a Glance Volume Down and UP ConnectorsLEFT/- and RIGHT/+ VIDEO1, 2 RCA, S-Video DVD/HD1PC/RGB 15-pin D-Sub Remote OUT 3.5-mm mini phone jack, tip/ring/sleeve CinemaWall Remote ControlExternal Control 9-pin, male D-Sub Remote in 3.5-mm mini phone jack, tip/ring/sleeveVOL + / VOL Cursor KeysVID DVD-HDOK / Menu DVD/HDVideo 1 CursorVolume + Mute12. / Exit Controls and Functions Installation Remote ControlOperation Other surfaces Step Procedure For Details, refer to Quick SetupOn a Wall or Table Stand InstallationConsiderations Mounting the CinemaWallVentilation Other ConsiderationsProlong operating life CinemaWall to Source ConnectingConnections to CinemaWallRefer to Computer/Video Signal Compatibility on page 52 for Audio ConnectionsOutputs from your source components to these inputs Connection RS-232 ControllerCable Management Installing the Cable ClampsInstallation Turning on the Power OperationChanging the OSD Language Setting the PC Display Properties Using the On-Screen Menus Audio Picture AdjustInstall Signal InfoMain Menu Picture AdjustTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness You must set the Advanced OSD option in the Function menu to SEL. ADJ. Exit Return Audio Aspect Ratio Description Aspect Ratio SettingsLanguage Refer to Changing the OSD Language on InstallSetting Blank Field to Gray makes it easier to see whether Power Power Turning ManagementFunction When you turn on the Soften feature Last Mode Signal Info Operation Maintenance and Troubleshooting Troubleshooting TipsSymptom Possible Causes Solution Computer/Video Signal Function Code Data RS-232 Connection and Port ConfigurationSerial Command Syntax Serial CommunicationsSerial Communications CinemaWall Specifications SpecificationsSpecifications are subject to change without notice Weight with Stand Regulatory Approvals Limited WarrantyCinemaWall Model CW-42HD Dimensions DimensionsCinemaWall Model CW-50XA Dimensions CinemaWall Model CW-61 Dimensions Computer/Video Signal Compatibility Chart Computer/Video Signal CompatibilitySUN Specifications Page RUMA-010975