Runco CW-50XA, CW-61, CW-42HD manual Safety Precautions, DOC Compliance Notice

Page 6

Safety Precautions

Thank you for your purchase of this quality Runco product! It has been designed to provide you with the quality of video that is expected in a home theater. This manual is your guide through the menus and operation. For the best performance, please read it carefully and keep it handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

WARNING

This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock.

This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

CAUTION

To turn off main power, be sure to remove the plugs from power outlets. The power outlet socket should be installed as near to the equipment as possible, and should be easily accessible.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING

This equipment has been tested and found to comply with the limits for a Class ‘B’ digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the Installation Manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area may cause harmful interference, in which case the user will be required to correct the interference at his own expense.

DOC Compliance Notice

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Please read and follow the safety precautions listed below to ensure the equipment is free from damage, and to ensure that no injury will occur as a result of improper use.

Do not insert any object, especially metal or liquids, into the plasma display.

Do not place any objects containing water or any other liquid on top of the plasma display.

Do not place the units in direct sunlight, near heaters or in extremely dusty or humid locations.

Do not install this system outdoors or otherwise exposed to the elements.

Do not place heavy objects on top of the plasma display.

If the power cord is damaged or frayed in any way, electrical shock and/or fire may result. Do not place objects on the power cord, and keep the cord away from heat-emitting devices. Should the power cord become damaged in any way, please contact your Runco Dealer for a replacement cord.

Do not remove the cover of the plasma display for any reason. If any problems arise with the unit, please contact a Runco Dealer or Runco International for service. Removing the covers will void the warranty.

vi

Runco CinemaWall Owner’s Operating Manual

Image 6
Contents CW-42HD CW-50XA Page Three Year Limited Warranty For Plasma DisplaysRIGHTS, Limits and Exclusions Runco INTERNATIONAL, INC Safety Precautions DOC Compliance NoticeTable of Contents Operation Maintenance and TroubleshootingSpecifications Serial CommunicationsList of Figures List of Figures Introduction About This ManualUsing This Manual If you need Turn toDescription, Features and Benefits Key Features and BenefitsOptional Accessories Controls and Indicators Controls and FunctionsCinemaWall at a Glance Volume Down and UP ConnectorsLEFT/- and RIGHT/+ VIDEO1, 2 RCA, S-Video DVD/HD1PC/RGB 15-pin D-Sub Remote in 3.5-mm mini phone jack, tip/ring/sleeve CinemaWall Remote ControlExternal Control 9-pin, male D-Sub Remote OUT 3.5-mm mini phone jack, tip/ring/sleeveDVD-HD Cursor KeysVID VOL + / VOLCursor DVD/HDVideo 1 OK / MenuVolume + Mute12. / Exit Controls and Functions Installation Remote ControlOperation Other surfaces Quick Setup Step Procedure For Details, refer toMounting the CinemaWall InstallationConsiderations On a Wall or Table StandVentilation Other ConsiderationsProlong operating life CinemaWall ConnectingConnections to CinemaWall to SourceRefer to Computer/Video Signal Compatibility on page 52 for Audio ConnectionsOutputs from your source components to these inputs RS-232 Controller ConnectionInstalling the Cable Clamps Cable ManagementInstallation Turning on the Power OperationChanging the OSD Language Setting the PC Display Properties Using the On-Screen Menus Signal Info Picture AdjustInstall AudioPicture Adjust Main MenuTypical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Typical Test Pattern for Adjusting Sharpness You must set the Advanced OSD option in the Function menu to SEL. ADJ. Exit Return Audio Aspect Ratio Settings Aspect Ratio DescriptionInstall Language Refer to Changing the OSD Language onSetting Blank Field to Gray makes it easier to see whether Power Power Turning ManagementFunction When you turn on the Soften feature Last Mode Signal Info Operation Maintenance and Troubleshooting Troubleshooting TipsSymptom Possible Causes Solution Computer/Video Signal Serial Communications RS-232 Connection and Port ConfigurationSerial Command Syntax Function Code DataSerial Communications Specifications CinemaWall SpecificationsWeight with Stand Regulatory Approvals Limited Warranty Specifications are subject to change without noticeDimensions CinemaWall Model CW-42HD DimensionsCinemaWall Model CW-50XA Dimensions CinemaWall Model CW-61 Dimensions Computer/Video Signal Compatibility Computer/Video Signal Compatibility ChartSUN Specifications Page RUMA-010975