Runco CW-61 Serial Communications, RS-232 Connection and Port Configuration, Function Code Data

6. Serial Communications

To interface the CinemaWall with a home theater automation/control system or a PC running terminal emulation software, connect it to your control system or PC as shown in Figure 3-4.

Configure the RS-232 controller or PC serial port as follows: odd parity, 8 data bits, 1 stop bit and no flow control. Set the baud rate 9600, to match that of the CinemaWall RS-232 port.

6.1

RS-232 Connection and Port Configuration

Table 6-1lists the RS-232 command set. Command codes are in hexadecimal format.

Table 6-1. Serial Commands

	Function					Code Data
Power		ON	9FH	80H	60H	4EH	00H	CDH
		OFF	9FH	80H	60H	4FH	00H	CEH
Input		Video1 (RCA)	DFH	80H	60H	47H	01H	01H	08H
Switch
		Video2 (S-Video)	DFH	80H	60H	47H	01H	02H	09H
		DVD/HD1 (RCA)	DFH	80H	60H	47H	01H	05H	0CH
		DVD/HD2 (RCA)	DFH	80H	60H	47H	01H	06H	0DH
		DVD/HD3 (HDMI)	DFH	80H	60H	47H	01H	0EH	15H
		PC/RGB (DB-15HD)	DFH	80H	60H	47H	01H	07H	0EH
		DVD/HD4 (HDMI)	DFH	80H	60H	47H	01H	1AH	21H
Audio Mute		ON	9FH	80H	60H	3EH	00H	BDH
		OFF	9FH	80H	60H	3FH	00H	BEH
Picture		NORMAL	DFH	80H	60H	0AH	01H	01H	CBH
Memory
		ISF DAY	DFH	80H	60H	0AH	01H	02H	CCH
		ISF NIGHT	DFH	80H	60H	0AH	01H	03H	CDH
		CUSTOM1	DFH	80H	60H	0AH	01H	04H	CEH
		FILM	DFH	80H	60H	0AH	01H	05H	CFH
Aspect		VIRTUALWIDE	DFH	80H	60H	51H	01H	02H	13H
Ratio
		LETTERBOX	DFH	80H	60H	51H	01H	03H	14H
		STD 4:3	DFH	80H	60H	51H	01H	04H	15H
		ANAMORPHIC	DFH	80H	60H	51H	01H	05H	16H
Computer		ON	DFH	80H	60H	7FH	03H	03H	09H	00H	4DH
		OFF	DFH	80H	60H	7FH	03H	03H	09H	01H	4EH
Cinema		ON	DFH	80H	60H	C1H	01H	01H	82H
Mode
		OFF	DFH	80H	60H	C1H	01H	02H	83H

Note: Contact your Runco dealer or Runco Technical Support for a complete list of external control codes if needed.

6.2

Serial Command Syntax

Runco CinemaWall Owner’s Operating Manual 45