Operation
PDP Protect: Select PDP Protect from the Function menu to configure the image
Set PDP Protect to AUTO to have the CinemaWall use the following settings:
•Lum. Setting: AUTO
•Orbiter: AUTO1
•Inverse: OFF
•Image Sweep: OFF
•Soften: OFF
•OSD Orbiter: ON
•OSD Contrast: LEVEL 1
To customize these settings, set PDP Protect to MANUAL and refer to the following paragraphs.
•Lum. Setting: Use this to activate the brightness limiter. When set to AUTO, the brightness of the screen is adjusted automatically to optimize picture quality.
Select LEVEL 1, LEVEL 2 or LEVEL 3 to set the maximum brightness (black level) to 75%, 50% or 25% respectively of the peak level. (These values are approximate.)
•Orbiter: Select Orbiter from the PDP Protect menu to set the picture shift.
•OFF: Orbiter mode does not function. This is the default setting when RGB is input.
•AUTO1: The picture moves around the screen intermittently, making the picture smaller. This is the default setting when a Video or DVD/HD/DTV signal is input. Set to OFF when these signals are not used.
•AUTO2: The picture moves around the screen intermittently, making the picture bigger.
When a Video or a DVD/HD/DTV signal is input, the AUTO1 and Note AUTO2 settings affect only the moving picture and do not change
the image size.
•Inverse: Select Inverse from the PDP Protect menu to set the inverse mode or to display a white screen.
•OFF: Inverse/white mode does not function.
•ON: The picture is displayed alternately between positive image and negative image.
•WHITE: The entire screen turns white.
•Image Sweep: When Image Sweep is set to ON, a white vertical bar moves periodically from left to right across the screen, at a constant speed.
•Soften: Select Soften from the PDP Protect menu to reduce edges (color transitions) and soften the image.
•OFF: Turns the SOFT FOCUS function off.
•1, 2, 3, 4: Activates the SOFT FOCUS setting. Higher numbers create a “softer” image.
Note | The Sharpness control (in the Picture Adjust menu) is disabled |
when you turn on the Soften feature. |
Runco CinemaWall Owner’s Operating Manual | 39 |