3. Installation
To install batteries in the remote control:
1.Remove the battery cover from the back of the remote control.
2.Insert the batteries included with the remote control. Ensure that the polarities correctly match the 
and 
markings inside the battery compartment.
3.Replace the battery cover.
If you have a
3.1
Remote Control
• When installing batteries, make sure that the battery polarities are correct. | Notes on Batteries |
•Do not mix an old battery with a new one or different types of batteries.
•If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.
The remote control can be used to control the CinemaWall within the ranges shown in | Notes on Remote Control |
Figure | Operation |
Approx.
7m/23ft
Figure 3-1. Available Range of the Remote Control
Runco CinemaWall Owner’s Operating Manual | 13 |