Runco CW-42HD, CW-50XA, CW-61 manual VIDEO1, 2 RCA, S-Video, DVD/HD1, PC/RGB 15-pin D-Sub

Controls and Functions

3

5

6

7

8

9

4

10

RIGHT	LEFT	AC IN
+ -	-	+

2 1

Figure 2-3. CW-50XA and CW-61 Connector Panel

1.POWER INPUT (100 to 240 VAC)

Connect the CinemaWall to power here, using the included power cord.

2.EXTERNAL SPEAKER OUTPUTS

Connect optional, external speakers here. Maintain the correct polarity. Connect the

(positive) and (negative) speaker wires to the EXT SPEAKER terminals on both the LEFT and RIGHT channels. Please refer to the owner’s manual for your speakers.

3.VIDEO1, 2 (RCA, S-Video)

Standard, Composite video and S-Video inputs for connecting a DVD player, satellite receiver, camcorder, laser disc player or Super VHS (S-VHS) VCR.

4.AUDIO1, AUDIO2, AUDIO3

Stereo, RCA-type audio inputs. You can associate each audio input with any video

input -- that is, specify which audio input becomes active when a given video source is selected. For more information, refer to Audio on page 34.

5.DVD/HD1

DVD/HD2

Standard-definition (480i/576i) or high-definition (720p/1080i), YPrPb component inputs for connecting a DVD player or high-definition TV source.

For best results, do not run your DVD player in progressive mode.

Tip

6.PC/RGB (15-pin D-Sub)

Connect an analog RGB signal from a computer or DTV decoder here.

Runco CinemaWall Owner’s Operating Manual 7