Runco CW-42HD, CW-50XA, CW-61 manual Using the On-Screen Menus

Operation

Note

WARNING

1.The native resolution of the CW-50XA and CW-61 is 1365 x 768; the native resolution of the CW-42HD is 1024 x 768. Other horizontal or vertical resolutions may be scaled upward or downward to fit the display.

2.With most computers, you can get the best picture at 1024 x 768 @ 60Hz.

3.The CinemaWall supports 36-bit color (68.7 billion possible colors).

To prevent image retention (burn-in) on your display, ALWAYS use a screen saver and set it to the shortest possible time.

To use the on-screen menus:

1.Press OK or MENU to display the Main Menu.

2.To select a menu item, use the up- or down-arrow buttons ( , ) on the remote control to highlight it.

3.Press OK or MENU to access that menu.

4.Use the up- or down-arrow buttons ( , ) to select the setting you want to change. Then, press OK or MENU.

5.Press the right- or left-arrow button ( , ) to change that setting. (If you do not do this within five seconds, the slidebar disappears.)

6.To return to the previous menu, press EXIT (). If the Main Menu is on-screen, pressing EXIT hides the OSD menu.

The CinemaWall OSD menus are arranged hierarchically, as shown in Figure 4-2.Depending on the selected input source and signal characteristics, some menu options may not be available.

4.4

Using the On-Screen Menus

Runco CinemaWall Owner’s Operating Manual 25