Sanyo DSR-3506P manual Viewing Video from a Camera, Viewing with automatic screen selection

Page 18

2VIEWING VIDEO FROM A CAMERA

Viewing on multi 6 screens

1 Press the [MULTI] button.

The MULTI indicator lights up and the monitor display is divided in six.

MULTI
		02
	01	03
04	05	06

zIn the case of both quad and multi 6 screen display, you can change the positions in which video from the various cameras are displayed. (JP.87)

Viewing with automatic screen selection

Setting automatic full screen selection

Use the following procedure when viewing a full screen to have the displayed video change automatically based on camera numbers.

1 Press the [SEQUENCE] button.

The SEQUENCE indicator starts to flash and the displayed video changes automatically based on camera numbers.

01-01-04 00:00:00 REC REPEAT EN A ALARM 0000

01

04-01-01 00:00:00 REC REPEATENA ALARM 0000

02

01-01-01 00:00:00 REC REPEATENA ALARM 0000

03

02-01-01 00:00:00 REC REPEATENA ALARM 0000

04

zIt is possible to specify the cameras for which automatic selection is to be carried out. (JP.89)

Canceling automatic selection

2 Either press the [SEQUENCE] button once again or press the appropriate [CAMERA SELECT], [QUAD], or [MULTI] button.

Automatic selection ends and the display returns to the normal screen.

Setting automatic quad-screen selection

1 Press the [QUAD] button.

The QUAD indicator lights up and the monitor display is divided in four.

QUAD
01	02
03	04

2 Press the [SEQUENCE] button.

The content of the split screen will automatically toggle between video from cameras No. 1 through No. 4 and video from cameras No. 5, No. 6, No. 1, and No. 2.

01	02
05	06
03	04
01	02

Returning to normal quad-screen display

3 Press the [SEQUENCE] button once again.

Automatic selection ends and normal quad-screen display returns.

zAutomatic selection cannot be used with playback video.

English

17

Image 18

Contents Page Location PrecautionService Avoiding Electrical Shock and FireSymbols used in this manual Main featuresAccessories IntroductionContents Contents Settings OtherBefore USE „ Notes on replacing the HDD„ Handling a detached HDD unit Hard disk and cooling fan are consumable components Backup batteryBefore USE Important recordingsNames and Functions of Parts Front panelNames and Functions of Parts Rear panel Connecting Alarm in terminals Installation and ConnectionsConnecting an amplifier Basic connectionsConnecting control terminals Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting the power cord01-01-04 000000 REC Reperat EN a Alarm Preparing for USEOperation display area Changing the language Preparing for USEChanging the position of the operation display area Press the OSD button several timesTurn the shuttle dial clockwise Setting the timeExample Setting 830 on 22 May Press the Exit buttonHard disk recording areas Alarm recording areaPreparing for USE The internal hard disk Normal recording areaViewing on multiple screens Viewing Video from a CameraViewing on a full screen Press the No Camera Select buttonPress the Multi button Viewing Video from a CameraViewing with automatic screen selection Press the Sequence buttonSet MON.2 Display from Alarm Operation SET to ON. JP.74 Viewing on the monitorPress the MON2 button Recording Timer recordingPress the Timer button Normal recordingEnd alarm recording Alarm recordingSet alarm recording When an alarm signal is detectedAfter entering the setting, press the Exit button Pre-alarm recordingSet pre-alarm recording If an alarm is detectedFast-forward and fast-rewind playback PlaybackPlaying video on a full screen Changing the playback speedPress the Zoom button during playback PlaybackEnlarging the playback video Move the zoom frame to the area to be magnifiedPress the Zoom button Viewing still imagesPerforming frame advance forward or reverse Press the Still button during playbackPlaying video on multiple screens Press the Quad button during playbackPress the Multi button during playback Searching for Recorded Video „ To view pre-alarm video Alarm searchPress the appropriate Alarm button during playback To view alarm video before or after the current playbackTime/date search Alarm thumbnail searchAlarm number for the selected recording will start to flash Turn the jog dial to select TIME/DATE SearchChannel Recording TOPRecording END SearchMotion detection search Search indicator lights and Search screen is displayedArchive area search Turn the jog dial to select the video for playbackEND Example Normal Cursor moves to ChannelStart Motion SensorOFF flashes Motion sensor setting screen is displayedSet the motion sensor to use for searching ‹OFFCarry out motion sensor setting again „ If not FOUND! is displayedDisplay returns to the Motion Detection Search screen Saving Copying Recorded Video Copying video to the hard disk’s archive area JP.35Copying video to a CompactFlash card or Microdrive JP.36 Press the Copy button Saving Copying Recorded VideoCopying video to the hard disk’s archive area Example Copying a specified 10-second portion of videoInsert a CompactFlash card „ To cancel a copy operationTurn the jog dial to select Seconds Insertion method Removal methodCopy screen is displayed Archive Area flashesJpeg images Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Images copied to a CompactFlash cardBasic menu operations Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Turn the jog dial to select a menuMenu Configuration and Operations Restoring menu setting items to their default valuesMovement and confirmation in sub-menus and setting screens Sub-menu configuration Main menu Turn the jog dial to select the item toBe set, and then turn the shuttle dial Clockwise Sequence SET Sub menu Setting item Settings or display contentMulti Screen JP.87 Color Level JP.93Initial SET is used to make the following setting Initial settingsSetting the summer time Initial SETTurn the jog dial to change the settings When USE is selected for Summer Time SETInitial SET Cursor moves to the time External clock settingCursor moves to the month To C Terminal To Clock SET in terminalDetecting connected cameras ExampleFirst position for title setting flashes Setting camera titlesExample Setting the title HALL-1F for Camera No Turn the jog dial to select HSetting holidays Example Setting 17 November as a holidayMonth Turn the shuttle dial clockwise after settingSet the day and month for item No DaySetting time periods Time Period a settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period B settings Set T1 to 6 AMTime period operations settings Time Period a flashesCursor moves to Mask Record SET is used to make the following settings Settings for recordingPerforming easy setup Record SETCursor moves to Timer Recording DAY Setting based on recording daysEasy Setup screen is displayed Record SETSet Picture Quality Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Audio RecordingSetting based on recording rate See P.55 AlarmDisplaying the recording areas Recording Area SET screen is displayed„ Recording area allocations „ Default hard disk settingsChanging recording areas „ If the normal recording area is set to 0%Setting overwrite permission Setting recording conditions No on the Warning screen flashes FlashingOn flashes Setting auto deleting Turn the jog dial to select the storage period01-01-04 000000 REC 1% Setting normal recording Turn the shuttle dial clockwise Press the Exit buttonClockwise Set REC Program Group Setting program recordingSet REC Rate ProgramCursor moves to 01 from Serect Individual Camera Rate FPS Recording rate flashesVideo from Camera No will not be recorded Timer settings Timer setting itemsStart To cancel all set timer reservations „ To change a displayed setting item„ Picture quality and recording rate for timer recording Timer reservations spanning more than 24 hoursOFF for Program flashes Make settings in the Week and Start columnsTimer recording using an external timer For FPS flashesDial clockwise Setting alarm recordingTo set alarm recording OFF flashesSet REC Rate and Duration Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Recording pattern for SW and onlyREC Rate for PRE-ALARM Recording flashes When alarm recording settings have been completedTo set pre-alarm recording Cursor moves to recording rate and durationDefault setting 1 MIN Cursor moves to Alarm Trigger When pre-alarm recording settings have been completedSetting the alarm trigger Use this setting to indicate how alarms are to be detectedPress the Camera Select button Setting the motion sensorsUse this procedure to set other sensor positions LevelOFF flashes for Level Flashes for the ModeCursor moves to Level To BExample Alarm Setting alarm operation and displayOFF flashes in the Alarm Retrigger field „ To stop motion sensor recordingCanceling alarms Setting alarm displayCursor moves to Alarm Priority 01-01-04 000000 REC 1% EN a Alarm General settingsSetting data display General SETSetting display for video loss General SETPerform the following if so required Disk Full default setting on Setting the buzzerAlarm default setting OFF Disk Error default setting on„ Operation after setting passwords Setting the security lockUse the same procedure to set 123456AB Setting the administrator passwordTurn the jog dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Then turn the shuttle dial clockwiseCanceling the security lock Setting and initializing the hard diskSetting the security lock Initializing the hard diskNetwork settings Expanding the hard disk capacityMaking network connections Network SET screen is displayed Making network settingsConnecting to an intranet using a hub OFF flashes for Network ControlSet Gateway Set IP AddressSet Subnet Mask Set PortGeneral SET screen appears Setting RS-485Enter the password using the shuttle dial and jog dial Cursor moves to Status Info‹DATA Setting procedure is ended and the display returns toNormal screen SpeedScreen SET Setting quad and multi 6 displaySetting quad positions Example Displaying Camera No in quad positionChecking modified screen positions Setting multi 6 positionsScreen SET Changes toExample Automatic switching of a full screen every 5 seconds 1S flashes for FullSetting the main monitor and monitor Specify Time Period a and Time Period BMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Mask SET screen is displayed Setting masksCursor moves to Mask SET Starts to flash for Time PeriodSetting the color level OFF flashes Settings ‹ indicates the default settingColor Level SET screen is displayed Auto flashes ‹AUTOPower Power FAILURE/USED TimeFAILURE/RECOVER DISK1 USEInitialized Record AreaOperation class Save Menus to CF Copy Menu SettingsSaving menu settings on a CompactFlash card Load Menus from CFWhen copying recording area settings Copy Menu SettingsLoading settings from a CompactFlash card Turn the jog dial to select LoadInterface Specifications RS-485 specificationsRS-485 termination switch settings Interface Specifications DVR/VCR command tableJpeg SpecificationsSpecifications XXXSpecifications DimensionsUnits mm 364.5 420 349 Table of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage„ Example After expansion to 160 GB 100%-usage 104 „ Example After expansion to 300 GB 100%-usageTable of recording rate settings Program recording rateTable of pre-alarm recording times Minutes 10s 20s 40sFPS field/sec Menu Setting Sequence Normal REC Mode SET →P.62Title SET →P.47 Menu Setting Sequence HDD SET →P.81 Mask SET →P.92RS-485 SET →P.85 Index Time/date search Timer recording Timer settings Index

Related manuals

Manual 48 pages 56.38 Kb