4GENERAL SET
Setting the buzzer
Use the following procedure to set a warning buzzer to sound for alarms or when hard disk space becomes insufficient.
1 Press the [MENU] button, turn the jog dial to select “3. GENERAL SET”, and then turn shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
MENU
2 Turn the jog dial to select “2. BUZZER SET”, and then turn the shuttle dial clockwise.
The <BUZZER SET> screen is displayed.
(1)
(2)
(3)
(4)
(5)
(6)
(1)ALARM (default setting: OFF)
Sounds the buzzer when a alarm occurs.
(2)DISK FULL (default setting: ON)
Sounds the buzzer when overwriting is forbidden and the hard disk capacity becomes insufficient.
(3)DISK ERROR (default setting: ON)
Sounds a buzzer when a
(4)LOCK WARNING (default setting: ON) Sounds a buzzer if a button is pressed while the security lock is on. Specifically, the buzzer sounds twice with an interval of approximately 0.5 seconds.
(5)KEY IN (default setting: OFF)
Sounds the buzzer when a button is pressed.
(6)VIDEO LOSS (default setting: OFF) A buzzer is sounded upon signal loss.
3 Turn the shuttle dial clockwise.
“OFF” flashes for “ALARM”.
4 Turn the jog dial to display “ON”, and then turn the shuttle dial clockwise.
[Settings] ( indicates the default setting)
Setting | Description | |
|
| |
OFF | The buzzer is not sounded when an alarm is | |
generated. | ||
| ||
|
| |
ON | The buzzer is sounded when an alarm is generated. | |
|
|
Use the above procedure whenever necessary to change buzzer settings (ON or OFF).
5 Press the [EXIT] button.
The setting procedure is ended and the display returns to the normal screen.
EXIT
zTo stop a buzzer, press any button or turn either the jog dial or shuttle dial.
SETTINGS
78 | English |