Sanyo DSR-3506P When alarm recording settings have been completed, To set pre-alarm recording

Page 71

3RECORD SET

When alarm recording settings have been completed

Press the [EXIT] button.

EXIT

The setting procedure is ended and the display returns to the normal screen.

“ALARM” appears in the operation display area.

When an alarm occurs, the number of alarms is displayed. Number of alarm

Alarm display

01-01-04 00:00:00 REC REPEAT EN A ALARM 0000

02

zIf a new alarm occurs during alarm recording, the alarm count is incremented in the same way as if two alarms had occurred. However, in cases where alarms occur consecutively on the same channel, alarm retrigger settings (JP.74) can be used to ensure that these are counted as one alarm only.

To set pre-alarm recording

zSettings cannot be made for “PRE-ALARM RECORDING” when “ALARM RECORDING” is set to “OFF”

1 Turn the jog dial to select “PRE-ALARM RECORDING”, and then turn the shuttle dial clockwise.

“OFF” flashes.

2 Turn the jog dial to change “OFF” to “ON”, and then turn the shuttle dial clockwise.

A message appears indicating automatic rate adjustment. “NO” flashes.

[Settings] (‹ indicates the default setting)

Setting

Description

 

 

‹OFF

Pre-alarm recording is not carried out.

 

 

ON

Pre-alarm recording is carried out.

 

 

3 Turn the jog dial to select “YES” for warning message, and then turn the shuttle dial clockwise.

SETTINGS

The cursor moves to recording rate and duration.

4 Turn the shuttle dial clockwise.

“REC RATE” for “PRE-ALARM RECORDING” flashes.

5 Turn the jog dial to set “REC RATE” (30 FPS, for example), and then turn the shuttle dial clockwise.

(Default setting: 15.00 FPS)

“DURATION” for “PRE-ALARM RECORDING” flashes.

70

English

Image 71
Contents Page Avoiding Electrical Shock and Fire PrecautionService LocationIntroduction Main featuresAccessories Symbols used in this manualContents Other Contents Settings„ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Important recordings Backup batteryBefore USE Hard disk and cooling fan are consumable componentsFront panel Names and Functions of PartsNames and Functions of Parts Rear panel Basic connections Installation and ConnectionsConnecting an amplifier Connecting Alarm in terminalsConnecting the power cord Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting control terminalsOperation display area 01-01-04 000000 REC Reperat EN a AlarmPreparing for USE Press the OSD button several times Preparing for USEChanging the position of the operation display area Changing the languagePress the Exit button Setting the timeExample Setting 830 on 22 May Turn the shuttle dial clockwiseNormal recording area Alarm recording areaPreparing for USE The internal hard disk Hard disk recording areasPress the No Camera Select button Viewing Video from a CameraViewing on a full screen Viewing on multiple screensPress the Sequence button Viewing Video from a CameraViewing with automatic screen selection Press the Multi buttonPress the MON2 button Set MON.2 Display from Alarm Operation SET to ON. JP.74Viewing on the monitor Normal recording Timer recordingPress the Timer button RecordingWhen an alarm signal is detected Alarm recordingSet alarm recording End alarm recordingIf an alarm is detected Pre-alarm recordingSet pre-alarm recording After entering the setting, press the Exit buttonChanging the playback speed PlaybackPlaying video on a full screen Fast-forward and fast-rewind playbackMove the zoom frame to the area to be magnified PlaybackEnlarging the playback video Press the Zoom button during playbackPress the Still button during playback Viewing still imagesPerforming frame advance forward or reverse Press the Zoom buttonPress the Multi button during playback Playing video on multiple screensPress the Quad button during playback Searching for Recorded Video To view alarm video before or after the current playback Alarm searchPress the appropriate Alarm button during playback „ To view pre-alarm videoTurn the jog dial to select TIME/DATE Search Alarm thumbnail searchAlarm number for the selected recording will start to flash Time/date searchSearch Recording TOPRecording END ChannelTurn the jog dial to select the video for playback Search indicator lights and Search screen is displayedArchive area search Motion detection searchMotion Sensor Example Normal Cursor moves to ChannelStart END‹OFF Motion sensor setting screen is displayedSet the motion sensor to use for searching OFF flashesDisplay returns to the Motion Detection Search screen Carry out motion sensor setting again„ If not FOUND! is displayed Copying video to a CompactFlash card or Microdrive JP.36 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.35 Example Copying a specified 10-second portion of video Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy buttonInsertion method Removal method „ To cancel a copy operationTurn the jog dial to select Seconds Insert a CompactFlash cardArchive Area flashes Copy screen is displayedImages copied to a CompactFlash card Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Jpeg imagesTurn the jog dial to select a menu Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Basic menu operationsMovement and confirmation in sub-menus and setting screens Menu Configuration and OperationsRestoring menu setting items to their default values Be set, and then turn the shuttle dial Clockwise Sub-menu configurationMain menu Turn the jog dial to select the item to Color Level JP.93 Sub menu Setting item Settings or display contentMulti Screen JP.87 Sequence SETInitial SET Initial settingsSetting the summer time Initial SET is used to make the following settingInitial SET Turn the jog dial to change the settingsWhen USE is selected for Summer Time SET To C Terminal To Clock SET in terminal External clock settingCursor moves to the month Cursor moves to the timeExample Detecting connected camerasTurn the jog dial to select H Setting camera titlesExample Setting the title HALL-1F for Camera No First position for title setting flashesExample Setting 17 November as a holiday Setting holidaysDay Turn the shuttle dial clockwise after settingSet the day and month for item No MonthSetting time periods Time Period B settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period a settings Set T1 to 6 AMCursor moves to Mask Time period operations settingsTime Period a flashes Record SET Settings for recordingPerforming easy setup Record SET is used to make the following settingsRecord SET Setting based on recording daysEasy Setup screen is displayed Cursor moves to Timer Recording DAYSet Audio Recording Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Picture QualitySetting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas See P.55„ If the normal recording area is set to 0% „ Default hard disk settingsChanging recording areas „ Recording area allocationsSetting overwrite permission On flashes Setting recording conditionsNo on the Warning screen flashes Flashing 01-01-04 000000 REC 1% Setting auto deletingTurn the jog dial to select the storage period Clockwise Setting normal recordingTurn the shuttle dial clockwise Press the Exit button Program Setting program recordingSet REC Rate Set REC Program GroupVideo from Camera No will not be recorded Cursor moves to 01 from Serect Individual Camera Rate FPSRecording rate flashes Start Timer settingsTimer setting items Timer reservations spanning more than 24 hours „ To change a displayed setting item„ Picture quality and recording rate for timer recording To cancel all set timer reservationsFor FPS flashes Make settings in the Week and Start columnsTimer recording using an external timer OFF for Program flashesOFF flashes Setting alarm recordingTo set alarm recording Dial clockwiseRecording pattern for SW and only Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Set REC Rate and DurationCursor moves to recording rate and duration When alarm recording settings have been completedTo set pre-alarm recording REC Rate for PRE-ALARM Recording flashesUse this setting to indicate how alarms are to be detected When pre-alarm recording settings have been completedSetting the alarm trigger Default setting 1 MIN Cursor moves to Alarm TriggerLevel Setting the motion sensorsUse this procedure to set other sensor positions Press the Camera Select buttonTo B Flashes for the ModeCursor moves to Level OFF flashes for Level„ To stop motion sensor recording Setting alarm operation and displayOFF flashes in the Alarm Retrigger field Example AlarmCursor moves to Alarm Priority Canceling alarmsSetting alarm display General SET General settingsSetting data display 01-01-04 000000 REC 1% EN a AlarmPerform the following if so required Setting display for video lossGeneral SET Disk Error default setting on Setting the buzzerAlarm default setting OFF Disk Full default setting onSetting the administrator password Setting the security lockUse the same procedure to set 123456AB „ Operation after setting passwordsThen turn the shuttle dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Turn the jog dial clockwiseInitializing the hard disk Setting and initializing the hard diskSetting the security lock Canceling the security lockMaking network connections Network settingsExpanding the hard disk capacity OFF flashes for Network Control Making network settingsConnecting to an intranet using a hub Network SET screen is displayedSet Port Set IP AddressSet Subnet Mask Set GatewayCursor moves to Status Info Setting RS-485Enter the password using the shuttle dial and jog dial General SET screen appearsSpeed Setting procedure is ended and the display returns toNormal screen ‹DATAExample Displaying Camera No in quad position Setting quad and multi 6 displaySetting quad positions Screen SETChanges to Setting multi 6 positionsScreen SET Checking modified screen positions1S flashes for Full Example Automatic switching of a full screen every 5 secondsMAIN/MON.2 Monitor SET screen is displayed Setting the main monitor and monitorSpecify Time Period a and Time Period B Starts to flash for the time period Starts to flash for Time Period Setting masksCursor moves to Mask SET Mask SET screen is displayedColor Level SET screen is displayed Setting the color levelOFF flashes Settings ‹ indicates the default setting ‹AUTO Auto flashesDISK1 USE Power FAILURE/USED TimeFAILURE/RECOVER PowerOperation class Initialized RecordArea Load Menus from CF Copy Menu SettingsSaving menu settings on a CompactFlash card Save Menus to CFTurn the jog dial to select Load Copy Menu SettingsLoading settings from a CompactFlash card When copying recording area settingsRS-485 termination switch settings Interface SpecificationsRS-485 specifications DVR/VCR command table Interface SpecificationsXXX SpecificationsSpecifications JpegUnits mm 364.5 420 349 SpecificationsDimensions „ Example After expansion to 160 GB 100%-usage Table of recording rate and times„ Example Recording to a 80 GB hard disk 100%-usage „ Example After expansion to 300 GB 100%-usage 104Program recording rate Table of recording rate settingsFPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s Title SET →P.47 Menu Setting SequenceNormal REC Mode SET →P.62 RS-485 SET →P.85 Menu Setting SequenceHDD SET →P.81 Mask SET →P.92 Index Index Time/date search Timer recording Timer settings
Related manuals
Manual 48 pages 56.38 Kb