Sanyo DSR-3506P Introduction, Main features, Accessories, Symbols used in this manual, Copyright

Page 3

INTRODUCTION

Main features

„The digital video recorder records video from monitoring cameras to its internal hard disk, it can display the video being displayed on a monitor split into four or six screens, and it can also display recorded video in the same way.

„Integrated 80 GB hard disk

Separately-sold hard disks (80, 160, 250, or 300 GB) can be installed to further increase this large memory capacity.

„Complete range of recording and playback functions

z Simultaneous recording and playback of video. z Timer recording allows recordings to be made at

different times each day.

z Zoom allows a certain section of playback video to be magnified.

z Recording and playback of audio.

z Alarm recording allows the actions of intruders to be recorded.

z Pre-alarm recording allows you to record video from up to 15 minutes ahead of an alarm.

z The video from specific cameras can be masked using a gray pattern to prevent it being monitored.

z Motion sensing can be used with each camera, and alarms can be setup to give priority to the recording of moving images.

„Search function - lets you instantly display the desired recording. (JP.26)

z Searching in order of alarm occurrence

z Searching by thumbnail using alarm search z Searching by date/time

z Searching within the archive area

z Searching for intruder motion using motion detection search

„Two-level security lock function - lets you restrict users for data and equipment management. (JP.79)

„Expandable, can be connected to a PC

z Recorded video can be copied to CompactFlash cards.

z A built-in LAN terminal provides support for network control, thus facilitating live monitoring, playback, searches, and menu setting.

z Monitoring can be carried out on two different monitor screens - namely, the main monitor and monitor 2. In addition, the main monitor can be viewed in split-screen mode while the monitor 2 is used for full screen viewing or automatic camera selection.

Accessories

Check that you have all the parts shown below.

INTRODUCTION

 

 

 

Power cord

 

Core clamp (1)

(for the microphone cable)

Power cord tie

Instruction Manual (DVR)

Manual for Remote Operation by Network Connection Quick Guide

Symbols used in this manual

Information describing operation methods or how to get the most out of functions.

Information describing the correct use of the digital video recorder.

(P. xx) indicates the page to be referred to.

Copyright

zThis manual and software are copyrighted by Sanyo Electric Co., Ltd.

zBrand and product names used in this manual are the trademarks or registered trademarks of their respective companies.

Except for personal use, copyright law prohibits the use of recorded copyrighted images without the permission of the copyright holder.

2

English

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Page Avoiding Electrical Shock and Fire PrecautionService LocationIntroduction Main featuresAccessories Symbols used in this manualContents Other Contents SettingsBefore USE „ Notes on replacing the HDD„ Handling a detached HDD unit Important recordings Backup batteryBefore USE Hard disk and cooling fan are consumable componentsFront panel Names and Functions of PartsNames and Functions of Parts Rear panel Basic connections Installation and ConnectionsConnecting an amplifier Connecting Alarm in terminalsConnecting the power cord Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting control terminals01-01-04 000000 REC Reperat EN a Alarm Preparing for USEOperation display area Press the OSD button several times Preparing for USEChanging the position of the operation display area Changing the languagePress the Exit button Setting the timeExample Setting 830 on 22 May Turn the shuttle dial clockwiseNormal recording area Alarm recording areaPreparing for USE The internal hard disk Hard disk recording areasPress the No Camera Select button Viewing Video from a CameraViewing on a full screen Viewing on multiple screensPress the Sequence button Viewing Video from a CameraViewing with automatic screen selection Press the Multi buttonSet MON.2 Display from Alarm Operation SET to ON. JP.74 Viewing on the monitorPress the MON2 button Normal recording Timer recordingPress the Timer button RecordingWhen an alarm signal is detected Alarm recordingSet alarm recording End alarm recordingIf an alarm is detected Pre-alarm recordingSet pre-alarm recording After entering the setting, press the Exit buttonChanging the playback speed PlaybackPlaying video on a full screen Fast-forward and fast-rewind playbackMove the zoom frame to the area to be magnified PlaybackEnlarging the playback video Press the Zoom button during playbackPress the Still button during playback Viewing still imagesPerforming frame advance forward or reverse Press the Zoom buttonPlaying video on multiple screens Press the Quad button during playbackPress the Multi button during playback Searching for Recorded Video To view alarm video before or after the current playback Alarm searchPress the appropriate Alarm button during playback „ To view pre-alarm videoTurn the jog dial to select TIME/DATE Search Alarm thumbnail searchAlarm number for the selected recording will start to flash Time/date searchSearch Recording TOPRecording END ChannelTurn the jog dial to select the video for playback Search indicator lights and Search screen is displayedArchive area search Motion detection searchMotion Sensor Example Normal Cursor moves to ChannelStart END‹OFF Motion sensor setting screen is displayedSet the motion sensor to use for searching OFF flashesCarry out motion sensor setting again „ If not FOUND! is displayedDisplay returns to the Motion Detection Search screen Saving Copying Recorded Video Copying video to the hard disk’s archive area JP.35Copying video to a CompactFlash card or Microdrive JP.36 Example Copying a specified 10-second portion of video Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy buttonInsertion method Removal method „ To cancel a copy operationTurn the jog dial to select Seconds Insert a CompactFlash cardArchive Area flashes Copy screen is displayedImages copied to a CompactFlash card Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Jpeg imagesTurn the jog dial to select a menu Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Basic menu operationsMenu Configuration and Operations Restoring menu setting items to their default valuesMovement and confirmation in sub-menus and setting screens Sub-menu configuration Main menu Turn the jog dial to select the item toBe set, and then turn the shuttle dial Clockwise Color Level JP.93 Sub menu Setting item Settings or display contentMulti Screen JP.87 Sequence SETInitial SET Initial settingsSetting the summer time Initial SET is used to make the following settingTurn the jog dial to change the settings When USE is selected for Summer Time SETInitial SET To C Terminal To Clock SET in terminal External clock settingCursor moves to the month Cursor moves to the timeExample Detecting connected camerasTurn the jog dial to select H Setting camera titlesExample Setting the title HALL-1F for Camera No First position for title setting flashesExample Setting 17 November as a holiday Setting holidaysDay Turn the shuttle dial clockwise after settingSet the day and month for item No MonthSetting time periods Time Period B settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period a settings Set T1 to 6 AMTime period operations settings Time Period a flashesCursor moves to Mask Record SET Settings for recordingPerforming easy setup Record SET is used to make the following settingsRecord SET Setting based on recording daysEasy Setup screen is displayed Cursor moves to Timer Recording DAYSet Audio Recording Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Picture QualitySetting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas See P.55„ If the normal recording area is set to 0% „ Default hard disk settingsChanging recording areas „ Recording area allocationsSetting overwrite permission Setting recording conditions No on the Warning screen flashes FlashingOn flashes Setting auto deleting Turn the jog dial to select the storage period01-01-04 000000 REC 1% Setting normal recording Turn the shuttle dial clockwise Press the Exit buttonClockwise Program Setting program recordingSet REC Rate Set REC Program GroupCursor moves to 01 from Serect Individual Camera Rate FPS Recording rate flashesVideo from Camera No will not be recorded Timer settings Timer setting itemsStart Timer reservations spanning more than 24 hours „ To change a displayed setting item„ Picture quality and recording rate for timer recording To cancel all set timer reservationsFor FPS flashes Make settings in the Week and Start columnsTimer recording using an external timer OFF for Program flashesOFF flashes Setting alarm recordingTo set alarm recording Dial clockwiseRecording pattern for SW and only Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Set REC Rate and DurationCursor moves to recording rate and duration When alarm recording settings have been completedTo set pre-alarm recording REC Rate for PRE-ALARM Recording flashesUse this setting to indicate how alarms are to be detected When pre-alarm recording settings have been completedSetting the alarm trigger Default setting 1 MIN Cursor moves to Alarm TriggerLevel Setting the motion sensorsUse this procedure to set other sensor positions Press the Camera Select buttonTo B Flashes for the ModeCursor moves to Level OFF flashes for Level„ To stop motion sensor recording Setting alarm operation and displayOFF flashes in the Alarm Retrigger field Example AlarmCanceling alarms Setting alarm displayCursor moves to Alarm Priority General SET General settingsSetting data display 01-01-04 000000 REC 1% EN a AlarmSetting display for video loss General SETPerform the following if so required Disk Error default setting on Setting the buzzerAlarm default setting OFF Disk Full default setting onSetting the administrator password Setting the security lockUse the same procedure to set 123456AB „ Operation after setting passwordsThen turn the shuttle dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Turn the jog dial clockwiseInitializing the hard disk Setting and initializing the hard diskSetting the security lock Canceling the security lockNetwork settings Expanding the hard disk capacityMaking network connections OFF flashes for Network Control Making network settingsConnecting to an intranet using a hub Network SET screen is displayedSet Port Set IP AddressSet Subnet Mask Set GatewayCursor moves to Status Info Setting RS-485Enter the password using the shuttle dial and jog dial General SET screen appearsSpeed Setting procedure is ended and the display returns toNormal screen ‹DATAExample Displaying Camera No in quad position Setting quad and multi 6 displaySetting quad positions Screen SETChanges to Setting multi 6 positionsScreen SET Checking modified screen positions1S flashes for Full Example Automatic switching of a full screen every 5 secondsSetting the main monitor and monitor Specify Time Period a and Time Period BMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Starts to flash for Time Period Setting masksCursor moves to Mask SET Mask SET screen is displayedSetting the color level OFF flashes Settings ‹ indicates the default settingColor Level SET screen is displayed ‹AUTO Auto flashesDISK1 USE Power FAILURE/USED TimeFAILURE/RECOVER PowerInitialized Record AreaOperation class Load Menus from CF Copy Menu SettingsSaving menu settings on a CompactFlash card Save Menus to CFTurn the jog dial to select Load Copy Menu SettingsLoading settings from a CompactFlash card When copying recording area settingsInterface Specifications RS-485 specificationsRS-485 termination switch settings DVR/VCR command table Interface SpecificationsXXX SpecificationsSpecifications JpegSpecifications DimensionsUnits mm 364.5 420 349 Table of recording rate and times „ Example Recording to a 80 GB hard disk 100%-usage„ Example After expansion to 160 GB 100%-usage „ Example After expansion to 300 GB 100%-usage 104Program recording rate Table of recording rate settingsTable of pre-alarm recording times Minutes 10s 20s 40sFPS field/sec Menu Setting Sequence Normal REC Mode SET →P.62Title SET →P.47 Menu Setting Sequence HDD SET →P.81 Mask SET →P.92RS-485 SET →P.85 Index Index Time/date search Timer recording Timer settings
Top Page Image Contents