Sanyo DSR-3506P manual Recording, Normal recording, Timer recording, Press the REC/STOP button

Page 20

3RECORDING

POWER indicator

FULL indicator

[REC/STOP] button

[TIMER] button

Normal recording

Use the following procedure to record the monitored video in the normal recording area.

Recording will not be possible until a time has been set for the digital video recorder. Make sure to set the time. (JP.14)

1 Press the [REC/STOP] button.

The REC/STOP indicator lights up, “REC” appears on- screen (i.e., the recording symbol), and recording starts.

Recording symbol

REC/STOP

 

01-01-04 00:00:00 REC REPEAT EN A ALARM 0000

 

 

02

zWhen recording for the first time, the default settings are used. For details regarding modification of the picture quality or recording rate, see P.62.

zWhen the space remaining in the normal recording area drops below a preset value, the FULL indicator on the digital video recorder’s front panel starts to flash. If recording is continued beyond this point, the normal recording area will become full, recording will stop, and the FULL indicator will stop flashing and remain lit. In such a case, use the <RECORDING AREA SET> screen to perform “AREA FULL RESET” for the normal recording area, thus allowing recording to start again from the beginning. (JP.60)

zPlayback is possible even while recording. See P.22 for more details.

Ending normal recording

2 Press and hold the [REC/STOP] button for approximately 3 seconds.

“REC” disappears from the operation display and recording ends.

REC/STOP

Timer recording

Use the following procedure to record the monitored video for a preset length of time in the normal recording area. Recording will not be possible until a time has been set for the digital video recorder. Make sure to set the time. (JP.14)

1 Press the [TIMER] button.

The TIMER indicator lights up and the digital video recorder enters timer recording standby mode.

TIMER

01-01-04 00:00:00 REC REPEAT EN A ALARM 0000

02

(1)See P.65 for more details on timer recording settings.

(2)At the time specified for the start of timer recording, the REC/STOP indicator lights up, “REC” appears on- screen (i.e., the recording symbol), and recording starts.

(3)At the time specified for the end of timer recording, the TIMER and REC/STOP indicators turn off, and recording ends.

zWhen the space remaining in the normal recording area drops below a preset value, the FULL indicator on the digital video recorder’s front panel starts to flash. If recording is continued beyond this point, the normal recording area will become full, recording will stop, and the FULL indicator will stop flashing and remain lit. In such a case, use the <RECORDING AREA SET> menu to perform “AREA FULL RESET” for the normal recording area, thus allowing recording to start again from the beginning. (JP.60)

zPlayback is possible even while recording. See P.22 for more details.

Stopping timer recording before completion

2 Press the [TIMER] button.

The TIMER indicator turns off and recording ends.

TIMER

English

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Page Precaution ServiceLocation Avoiding Electrical Shock and FireMain features AccessoriesSymbols used in this manual IntroductionContents Contents Settings Other„ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Backup battery Before USEHard disk and cooling fan are consumable components Important recordingsNames and Functions of Parts Front panelNames and Functions of Parts Rear panel Installation and Connections Connecting an amplifierConnecting Alarm in terminals Basic connectionsInstallation and Connections Connecting Sensor Alarm OUT terminalsConnecting control terminals Connecting the power cordOperation display area 01-01-04 000000 REC Reperat EN a AlarmPreparing for USE Preparing for USE Changing the position of the operation display areaChanging the language Press the OSD button several timesSetting the time Example Setting 830 on 22 MayTurn the shuttle dial clockwise Press the Exit buttonAlarm recording area Preparing for USE The internal hard diskHard disk recording areas Normal recording area Viewing Video from a Camera Viewing on a full screen Viewing on multiple screens Press the No Camera Select buttonViewing Video from a Camera Viewing with automatic screen selectionPress the Multi button Press the Sequence buttonPress the MON2 button Set MON.2 Display from Alarm Operation SET to ON. JP.74Viewing on the monitor Timer recording Press the Timer buttonRecording Normal recordingAlarm recording Set alarm recordingEnd alarm recording When an alarm signal is detectedPre-alarm recording Set pre-alarm recordingAfter entering the setting, press the Exit button If an alarm is detectedPlayback Playing video on a full screenFast-forward and fast-rewind playback Changing the playback speedPlayback Enlarging the playback videoPress the Zoom button during playback Move the zoom frame to the area to be magnifiedViewing still images Performing frame advance forward or reversePress the Zoom button Press the Still button during playbackPress the Multi button during playback Playing video on multiple screensPress the Quad button during playback Searching for Recorded Video Alarm search Press the appropriate Alarm button during playback„ To view pre-alarm video To view alarm video before or after the current playbackAlarm thumbnail search Alarm number for the selected recording will start to flashTime/date search Turn the jog dial to select TIME/DATE SearchRecording TOP Recording ENDChannel SearchSearch indicator lights and Search screen is displayed Archive area searchMotion detection search Turn the jog dial to select the video for playbackExample Normal Cursor moves to Channel StartEND Motion SensorMotion sensor setting screen is displayed Set the motion sensor to use for searchingOFF flashes ‹OFFDisplay returns to the Motion Detection Search screen Carry out motion sensor setting again„ If not FOUND! is displayed Copying video to a CompactFlash card or Microdrive JP.36 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.35 Saving Copying Recorded Video Copying video to the hard disk’s archive areaPress the Copy button Example Copying a specified 10-second portion of video„ To cancel a copy operation Turn the jog dial to select SecondsInsert a CompactFlash card Insertion method Removal methodCopy screen is displayed Archive Area flashesViewing images copied to a CompactFlash card on a PC Formatting a CompactFlash cardJpeg images Images copied to a CompactFlash cardMenu Configuration and Operations Moving from the Main Menu to a sub-menu or setting screenBasic menu operations Turn the jog dial to select a menuMovement and confirmation in sub-menus and setting screens Menu Configuration and OperationsRestoring menu setting items to their default values Be set, and then turn the shuttle dial Clockwise Sub-menu configurationMain menu Turn the jog dial to select the item to Sub menu Setting item Settings or display content Multi Screen JP.87Sequence SET Color Level JP.93Initial settings Setting the summer timeInitial SET is used to make the following setting Initial SETInitial SET Turn the jog dial to change the settingsWhen USE is selected for Summer Time SET External clock setting Cursor moves to the monthCursor moves to the time To C Terminal To Clock SET in terminalDetecting connected cameras ExampleSetting camera titles Example Setting the title HALL-1F for Camera NoFirst position for title setting flashes Turn the jog dial to select HSetting holidays Example Setting 17 November as a holidayTurn the shuttle dial clockwise after setting Set the day and month for item NoMonth DaySetting time periods Timer period settings Example 1 Setting periods using Time Period aTime Period a settings Set T1 to 6 AM Time Period B settings Set T1 to 6 AMCursor moves to Mask Time period operations settingsTime Period a flashes Settings for recording Performing easy setupRecord SET is used to make the following settings Record SETSetting based on recording days Easy Setup screen is displayedCursor moves to Timer Recording DAY Record SETExample on Settings ‹ indicates the default setting Display returns to the Easy Setup screenSet Picture Quality Set Audio RecordingSetting based on recording rate Alarm Displaying the recording areasSee P.55 Recording Area SET screen is displayed„ Default hard disk settings Changing recording areas„ Recording area allocations „ If the normal recording area is set to 0%Setting overwrite permission On flashes Setting recording conditionsNo on the Warning screen flashes Flashing 01-01-04 000000 REC 1% Setting auto deletingTurn the jog dial to select the storage period Clockwise Setting normal recordingTurn the shuttle dial clockwise Press the Exit button Setting program recording Set REC RateSet REC Program Group ProgramVideo from Camera No will not be recorded Cursor moves to 01 from Serect Individual Camera Rate FPSRecording rate flashes Start Timer settingsTimer setting items „ To change a displayed setting item „ Picture quality and recording rate for timer recordingTo cancel all set timer reservations Timer reservations spanning more than 24 hoursMake settings in the Week and Start columns Timer recording using an external timerOFF for Program flashes For FPS flashesSetting alarm recording To set alarm recordingDial clockwise OFF flashesMaximum number of alarm recordings Operates while an alarm is being triggered sec. minimumSet REC Rate and Duration Recording pattern for SW and onlyWhen alarm recording settings have been completed To set pre-alarm recordingREC Rate for PRE-ALARM Recording flashes Cursor moves to recording rate and durationWhen pre-alarm recording settings have been completed Setting the alarm triggerDefault setting 1 MIN Cursor moves to Alarm Trigger Use this setting to indicate how alarms are to be detectedSetting the motion sensors Use this procedure to set other sensor positionsPress the Camera Select button LevelFlashes for the Mode Cursor moves to LevelOFF flashes for Level To BSetting alarm operation and display OFF flashes in the Alarm Retrigger fieldExample Alarm „ To stop motion sensor recordingCursor moves to Alarm Priority Canceling alarmsSetting alarm display General settings Setting data display01-01-04 000000 REC 1% EN a Alarm General SETPerform the following if so required Setting display for video lossGeneral SET Setting the buzzer Alarm default setting OFFDisk Full default setting on Disk Error default setting onSetting the security lock Use the same procedure to set 123456AB„ Operation after setting passwords Setting the administrator passwordFollowing this, turn the shuttle dial clockwise Turn the jog dial to select onTurn the jog dial clockwise Then turn the shuttle dial clockwiseSetting and initializing the hard disk Setting the security lockCanceling the security lock Initializing the hard diskMaking network connections Network settingsExpanding the hard disk capacity Making network settings Connecting to an intranet using a hubNetwork SET screen is displayed OFF flashes for Network ControlSet IP Address Set Subnet MaskSet Gateway Set PortSetting RS-485 Enter the password using the shuttle dial and jog dialGeneral SET screen appears Cursor moves to Status InfoSetting procedure is ended and the display returns to Normal screen‹DATA SpeedSetting quad and multi 6 display Setting quad positionsScreen SET Example Displaying Camera No in quad positionSetting multi 6 positions Screen SETChecking modified screen positions Changes toExample Automatic switching of a full screen every 5 seconds 1S flashes for FullMAIN/MON.2 Monitor SET screen is displayed Setting the main monitor and monitorSpecify Time Period a and Time Period B Starts to flash for the time period Setting masks Cursor moves to Mask SETMask SET screen is displayed Starts to flash for Time PeriodColor Level SET screen is displayed Setting the color levelOFF flashes Settings ‹ indicates the default setting Auto flashes ‹AUTOPower FAILURE/USED Time FAILURE/RECOVERPower DISK1 USEOperation class Initialized RecordArea Copy Menu Settings Saving menu settings on a CompactFlash cardSave Menus to CF Load Menus from CFCopy Menu Settings Loading settings from a CompactFlash cardWhen copying recording area settings Turn the jog dial to select LoadRS-485 termination switch settings Interface SpecificationsRS-485 specifications Interface Specifications DVR/VCR command tableSpecifications SpecificationsJpeg XXXUnits mm 364.5 420 349 SpecificationsDimensions „ Example After expansion to 160 GB 100%-usage Table of recording rate and times„ Example Recording to a 80 GB hard disk 100%-usage 104 „ Example After expansion to 300 GB 100%-usageTable of recording rate settings Program recording rateFPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s Title SET →P.47 Menu Setting SequenceNormal REC Mode SET →P.62 RS-485 SET →P.85 Menu Setting SequenceHDD SET →P.81 Mask SET →P.92 Index Time/date search Timer recording Timer settings Index
Top Page Image Contents