Sanyo DSR-3506P manual Archive area search, Motion detection search

Page 31

5SEARCHING FOR RECORDED VIDEO

Archive area search

Use the following procedure to playback video that has been stored in the archive area.

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The SEARCH indicator lights up and the <SEARCH> screen is displayed.

SEARCH

2 Turn the jog dial to select “ARCHIVE AREA SEARCH”.

3 Turn the shuttle dial clockwise.

The <ARCHIVE AREA SEARCH> screen is displayed. This screen lists the eight most-recent recordings in the order in which archiving was performed.

(1) (2) (3) (4)

(5)

(6)

(1)NO: Indicates the archive number.

(2)DATE: Indicates the date of recording.

(3)START: Indicates the start time for the recording.

(4)CH: Indicates the channel (or camera number) for the recording.

(5)TOTAL: Indicates the total capacity of the archive area.

(6)USED: Indicates the amount of the archive area that has been used.

4 Turn the jog dial to select the video for playback.

The selected image is displayed on the preview screen.

zTo display the next or previous recording Turn the jog dial clockwise or counter-clockwise accordingly.

zUp to eight recordings can be displayed in the <ARCHIVE AREA SEARCH> screen.

zTo leave search mode

Press the [SEARCH] button. SEARCH indicator turns off.

5 Turn the shuttle dial clockwise.

The selected recording is played back on the full screen.

Motion detection search

By setting the motion sensor for recordings from the normal recording area (i.e., normal recordings and timer recordings) or alarm recording area, variations from these recordings as a result of the presence of an intruder or the like can be detected, and the corresponding video can be played back.

zWhen a camera number (or channel) is specified, searching will only be carried out for that camera.

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

SEARCH indicator lights and <SEARCH> screen is displayed.

SEARCH

OPERATION

30

English

Image 31

Contents Page Avoiding Electrical Shock and Fire PrecautionService LocationIntroduction Main featuresAccessories Symbols used in this manualContents Other Contents Settings„ Notes on replacing the HDD Before USE„ Handling a detached HDD unit Important recordings Backup batteryBefore USE Hard disk and cooling fan are consumable componentsFront panel Names and Functions of PartsNames and Functions of Parts Rear panel Basic connections Installation and ConnectionsConnecting an amplifier Connecting Alarm in terminalsConnecting the power cord Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting control terminalsPreparing for USE 01-01-04 000000 REC Reperat EN a AlarmOperation display area Press the OSD button several times Preparing for USEChanging the position of the operation display area Changing the languagePress the Exit button Setting the timeExample Setting 830 on 22 May Turn the shuttle dial clockwiseNormal recording area Alarm recording areaPreparing for USE The internal hard disk Hard disk recording areasPress the No Camera Select button Viewing Video from a CameraViewing on a full screen Viewing on multiple screensPress the Sequence button Viewing Video from a CameraViewing with automatic screen selection Press the Multi buttonViewing on the monitor Set MON.2 Display from Alarm Operation SET to ON. JP.74Press the MON2 button Normal recording Timer recordingPress the Timer button RecordingWhen an alarm signal is detected Alarm recordingSet alarm recording End alarm recordingIf an alarm is detected Pre-alarm recordingSet pre-alarm recording After entering the setting, press the Exit buttonChanging the playback speed PlaybackPlaying video on a full screen Fast-forward and fast-rewind playbackMove the zoom frame to the area to be magnified PlaybackEnlarging the playback video Press the Zoom button during playbackPress the Still button during playback Viewing still imagesPerforming frame advance forward or reverse Press the Zoom buttonPress the Quad button during playback Playing video on multiple screensPress the Multi button during playback Searching for Recorded Video To view alarm video before or after the current playback Alarm searchPress the appropriate Alarm button during playback „ To view pre-alarm videoTurn the jog dial to select TIME/DATE Search Alarm thumbnail searchAlarm number for the selected recording will start to flash Time/date searchSearch Recording TOPRecording END ChannelTurn the jog dial to select the video for playback Search indicator lights and Search screen is displayedArchive area search Motion detection searchMotion Sensor Example Normal Cursor moves to ChannelStart END‹OFF Motion sensor setting screen is displayedSet the motion sensor to use for searching OFF flashes„ If not FOUND! is displayed Carry out motion sensor setting againDisplay returns to the Motion Detection Search screen Copying video to the hard disk’s archive area JP.35 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.36 Example Copying a specified 10-second portion of video Saving Copying Recorded VideoCopying video to the hard disk’s archive area Press the Copy buttonInsertion method Removal method „ To cancel a copy operationTurn the jog dial to select Seconds Insert a CompactFlash cardArchive Area flashes Copy screen is displayedImages copied to a CompactFlash card Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Jpeg imagesTurn the jog dial to select a menu Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Basic menu operationsRestoring menu setting items to their default values Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Main menu Turn the jog dial to select the item to Sub-menu configurationBe set, and then turn the shuttle dial Clockwise Color Level JP.93 Sub menu Setting item Settings or display contentMulti Screen JP.87 Sequence SETInitial SET Initial settingsSetting the summer time Initial SET is used to make the following settingWhen USE is selected for Summer Time SET Turn the jog dial to change the settingsInitial SET To C Terminal To Clock SET in terminal External clock settingCursor moves to the month Cursor moves to the timeExample Detecting connected camerasTurn the jog dial to select H Setting camera titlesExample Setting the title HALL-1F for Camera No First position for title setting flashesExample Setting 17 November as a holiday Setting holidaysDay Turn the shuttle dial clockwise after settingSet the day and month for item No MonthSetting time periods Time Period B settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period a settings Set T1 to 6 AMTime Period a flashes Time period operations settingsCursor moves to Mask Record SET Settings for recordingPerforming easy setup Record SET is used to make the following settingsRecord SET Setting based on recording daysEasy Setup screen is displayed Cursor moves to Timer Recording DAYSet Audio Recording Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Picture QualitySetting based on recording rate Recording Area SET screen is displayed AlarmDisplaying the recording areas See P.55„ If the normal recording area is set to 0% „ Default hard disk settingsChanging recording areas „ Recording area allocationsSetting overwrite permission No on the Warning screen flashes Flashing Setting recording conditionsOn flashes Turn the jog dial to select the storage period Setting auto deleting01-01-04 000000 REC 1% Turn the shuttle dial clockwise Press the Exit button Setting normal recordingClockwise Program Setting program recordingSet REC Rate Set REC Program GroupRecording rate flashes Cursor moves to 01 from Serect Individual Camera Rate FPSVideo from Camera No will not be recorded Timer setting items Timer settingsStart Timer reservations spanning more than 24 hours „ To change a displayed setting item„ Picture quality and recording rate for timer recording To cancel all set timer reservationsFor FPS flashes Make settings in the Week and Start columnsTimer recording using an external timer OFF for Program flashesOFF flashes Setting alarm recordingTo set alarm recording Dial clockwiseRecording pattern for SW and only Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Set REC Rate and DurationCursor moves to recording rate and duration When alarm recording settings have been completedTo set pre-alarm recording REC Rate for PRE-ALARM Recording flashesUse this setting to indicate how alarms are to be detected When pre-alarm recording settings have been completedSetting the alarm trigger Default setting 1 MIN Cursor moves to Alarm TriggerLevel Setting the motion sensorsUse this procedure to set other sensor positions Press the Camera Select buttonTo B Flashes for the ModeCursor moves to Level OFF flashes for Level„ To stop motion sensor recording Setting alarm operation and displayOFF flashes in the Alarm Retrigger field Example AlarmSetting alarm display Canceling alarmsCursor moves to Alarm Priority General SET General settingsSetting data display 01-01-04 000000 REC 1% EN a AlarmGeneral SET Setting display for video lossPerform the following if so required Disk Error default setting on Setting the buzzerAlarm default setting OFF Disk Full default setting onSetting the administrator password Setting the security lockUse the same procedure to set 123456AB „ Operation after setting passwordsThen turn the shuttle dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Turn the jog dial clockwiseInitializing the hard disk Setting and initializing the hard diskSetting the security lock Canceling the security lockExpanding the hard disk capacity Network settingsMaking network connections OFF flashes for Network Control Making network settingsConnecting to an intranet using a hub Network SET screen is displayedSet Port Set IP AddressSet Subnet Mask Set GatewayCursor moves to Status Info Setting RS-485Enter the password using the shuttle dial and jog dial General SET screen appearsSpeed Setting procedure is ended and the display returns toNormal screen ‹DATAExample Displaying Camera No in quad position Setting quad and multi 6 displaySetting quad positions Screen SETChanges to Setting multi 6 positionsScreen SET Checking modified screen positions1S flashes for Full Example Automatic switching of a full screen every 5 secondsSpecify Time Period a and Time Period B Setting the main monitor and monitorMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Starts to flash for Time Period Setting masksCursor moves to Mask SET Mask SET screen is displayedOFF flashes Settings ‹ indicates the default setting Setting the color levelColor Level SET screen is displayed ‹AUTO Auto flashesDISK1 USE Power FAILURE/USED TimeFAILURE/RECOVER PowerArea Initialized RecordOperation class Load Menus from CF Copy Menu SettingsSaving menu settings on a CompactFlash card Save Menus to CFTurn the jog dial to select Load Copy Menu SettingsLoading settings from a CompactFlash card When copying recording area settingsRS-485 specifications Interface SpecificationsRS-485 termination switch settings DVR/VCR command table Interface SpecificationsXXX SpecificationsSpecifications JpegDimensions SpecificationsUnits mm 364.5 420 349 „ Example Recording to a 80 GB hard disk 100%-usage Table of recording rate and times„ Example After expansion to 160 GB 100%-usage „ Example After expansion to 300 GB 100%-usage 104Program recording rate Table of recording rate settingsMinutes 10s 20s 40s Table of pre-alarm recording timesFPS field/sec Normal REC Mode SET →P.62 Menu Setting SequenceTitle SET →P.47 HDD SET →P.81 Mask SET →P.92 Menu Setting SequenceRS-485 SET →P.85 Index Index Time/date search Timer recording Timer settings

Related manuals

Manual 48 pages 56.38 Kb