4GENERAL SET
3 Press the [EXIT] button.
The setting procedure is ended and the display returns to the normal screen.
EXIT
Setting the security lock
LOCK indicator
[SHUTTLE HOLD] button
1 With the normal monitoring screen displayed, press the [SHUTTLE HOLD] button for approximately 3 seconds.
The LOCK indicator on the front panel lights up and a buzzer sounds to indicate activation of the security lock.
SHUTTLE HOLD
2 To confirm activation of this function, press the [MENU] button.
A password entry screen appears for about 5 seconds.
Canceling the security lock
3 Enter your password while the password entry screen is displayed.
Use the jog dial and the shuttle dial to perform this procedure.
zEnter the password set for administrators or users (such as “123456AB”).
Be sure to enter the correct password for the operation
(s) to be carried out. (JP.79)
4 Turn the shuttle dial clockwise.
The security lock is cancelled and the display returns to the normal screen.
zIf an administrator password was entered, the security lock is cancelled and the indicator is turned off.
zIf a user password was entered, the security lock is partially cancelled and the indicator remains lit.
Setting and initializing the hard disk
This section describes how to initialize and expand the hard disk.
When a single hard disk is installed, the hard disk capacity is displayed for DISK 1; when two hard disks are installed, the capacity is displayed for “DISK 1” and “DISK 2”.
Initializing the hard disk
1 Press the [MENU] button and turn the jog dial to select “3. GENERAL SET”, and then turn the shuttle dial clockwise.
The <GENERAL SET> screen is displayed.
MENU
2 Turn the jog dial to select “4. HDD SET”, and then turn the shuttle dial clockwise.
The <HDD SET> screen is displayed.
The cursor moves to “DISK INITIALIZE”.
English | 81 |