Sanyo DSR-3506P manual Setting the motion sensors, Press the Camera Select button, Level

Page 73

3RECORD SET

Setting the motion sensors

Use the following procedure to set motion sensor on video from each camera so that alarms can be detected.

(1)

(2)

(3)

(4)

(5)

(1)Motion sensor setting

Displays changes in response to the sensor condition, and settings are made turning the jog dial.

-: Sensor off

A or B: Sensor on

(2)Camera number display

Changes when a [CAMERA SELECT] button is pressed. Use this item to select the camera for which motion sensors are to be setup.

(3)Time period

Select an interval as set using “TIME PERIOD” on P.50.

(4)LEVEL

Sets the sensitivity level of the motion sensors. OFF: No motion sensor has been set.

1 to 10: A motion sensor is set. Lower values correspond to higher sensitivity levels and vice versa.

(5)MODE

Sets the detection method for the motion sensors. (JP.72)

zRefer to “NAMES AND FUNCTIONS OF PARTS” for more details regarding operation of the jog dial and shuttle dial. (JP.8)

1 Make timer settings for “TIME PERIOD A” and “TIME PERIOD B” from <TIME PERIOD SET>. (JP.50)

2 Turn the jog dial select “MOTION SENSOR”, and then turn the shuttle dial clockwise.

The motion sensor screen is displayed.

The cursor (blue) is displayed at the top left position.

Motion sensor	SETTINGS
screen

3 Press the [CAMERA SELECT] button.

Select the camera for which motion sensors are to be setup.

4 Turn the jog dial clockwise or counter- clockwise to move the cursor (blue) to the position where a sensor is to be set.

5 Turn the shuttle dial clockwise, and then turn the jog dial to select “A” or “B”.

“A” or “B”: Sensor set

“-” : No sensor

6 Turn the shuttle dial clockwise.

After confirming this setting, the cursor (blue) moves one position to the right.

7 Use this procedure to set other sensor positions.

72

English

Image 73

Contents Page Service PrecautionLocation Avoiding Electrical Shock and FireAccessories Main featuresSymbols used in this manual IntroductionContents Other Contents Settings„ Notes on replacing the HDD Before USE„ Handling a detached HDD unit Before USE Backup batteryHard disk and cooling fan are consumable components Important recordingsFront panel Names and Functions of PartsNames and Functions of Parts Rear panel Connecting an amplifier Installation and ConnectionsConnecting Alarm in terminals Basic connectionsConnecting Sensor Alarm OUT terminals Installation and ConnectionsConnecting control terminals Connecting the power cordPreparing for USE 01-01-04 000000 REC Reperat EN a AlarmOperation display area Changing the position of the operation display area Preparing for USEChanging the language Press the OSD button several timesExample Setting 830 on 22 May Setting the timeTurn the shuttle dial clockwise Press the Exit buttonPreparing for USE The internal hard disk Alarm recording areaHard disk recording areas Normal recording areaViewing on a full screen Viewing Video from a CameraViewing on multiple screens Press the No Camera Select buttonViewing with automatic screen selection Viewing Video from a CameraPress the Multi button Press the Sequence buttonViewing on the monitor Set MON.2 Display from Alarm Operation SET to ON. JP.74Press the MON2 button Press the Timer button Timer recordingRecording Normal recordingSet alarm recording Alarm recordingEnd alarm recording When an alarm signal is detectedSet pre-alarm recording Pre-alarm recordingAfter entering the setting, press the Exit button If an alarm is detectedPlaying video on a full screen PlaybackFast-forward and fast-rewind playback Changing the playback speedEnlarging the playback video PlaybackPress the Zoom button during playback Move the zoom frame to the area to be magnifiedPerforming frame advance forward or reverse Viewing still imagesPress the Zoom button Press the Still button during playbackPress the Quad button during playback Playing video on multiple screensPress the Multi button during playback Searching for Recorded Video Press the appropriate Alarm button during playback Alarm search„ To view pre-alarm video To view alarm video before or after the current playbackAlarm number for the selected recording will start to flash Alarm thumbnail searchTime/date search Turn the jog dial to select TIME/DATE SearchRecording END Recording TOPChannel SearchArchive area search Search indicator lights and Search screen is displayedMotion detection search Turn the jog dial to select the video for playbackStart Example Normal Cursor moves to ChannelEND Motion SensorSet the motion sensor to use for searching Motion sensor setting screen is displayedOFF flashes ‹OFF„ If not FOUND! is displayed Carry out motion sensor setting againDisplay returns to the Motion Detection Search screen Copying video to the hard disk’s archive area JP.35 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.36 Copying video to the hard disk’s archive area Saving Copying Recorded VideoPress the Copy button Example Copying a specified 10-second portion of videoTurn the jog dial to select Seconds „ To cancel a copy operationInsert a CompactFlash card Insertion method Removal methodArchive Area flashes Copy screen is displayedFormatting a CompactFlash card Viewing images copied to a CompactFlash card on a PCJpeg images Images copied to a CompactFlash cardMoving from the Main Menu to a sub-menu or setting screen Menu Configuration and OperationsBasic menu operations Turn the jog dial to select a menuRestoring menu setting items to their default values Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Main menu Turn the jog dial to select the item to Sub-menu configurationBe set, and then turn the shuttle dial Clockwise Multi Screen JP.87 Sub menu Setting item Settings or display contentSequence SET Color Level JP.93Setting the summer time Initial settingsInitial SET is used to make the following setting Initial SETWhen USE is selected for Summer Time SET Turn the jog dial to change the settingsInitial SET Cursor moves to the month External clock settingCursor moves to the time To C Terminal To Clock SET in terminalExample Detecting connected camerasExample Setting the title HALL-1F for Camera No Setting camera titlesFirst position for title setting flashes Turn the jog dial to select HExample Setting 17 November as a holiday Setting holidaysSet the day and month for item No Turn the shuttle dial clockwise after settingMonth DaySetting time periods Example 1 Setting periods using Time Period a Timer period settingsTime Period a settings Set T1 to 6 AM Time Period B settings Set T1 to 6 AMTime Period a flashes Time period operations settingsCursor moves to Mask Performing easy setup Settings for recordingRecord SET is used to make the following settings Record SETEasy Setup screen is displayed Setting based on recording daysCursor moves to Timer Recording DAY Record SETDisplay returns to the Easy Setup screen Example on Settings ‹ indicates the default settingSet Picture Quality Set Audio RecordingSetting based on recording rate Displaying the recording areas AlarmSee P.55 Recording Area SET screen is displayedChanging recording areas „ Default hard disk settings„ Recording area allocations „ If the normal recording area is set to 0%Setting overwrite permission No on the Warning screen flashes Flashing Setting recording conditionsOn flashes Turn the jog dial to select the storage period Setting auto deleting01-01-04 000000 REC 1% Turn the shuttle dial clockwise Press the Exit button Setting normal recordingClockwise Set REC Rate Setting program recordingSet REC Program Group ProgramRecording rate flashes Cursor moves to 01 from Serect Individual Camera Rate FPSVideo from Camera No will not be recorded Timer setting items Timer settingsStart „ Picture quality and recording rate for timer recording „ To change a displayed setting itemTo cancel all set timer reservations Timer reservations spanning more than 24 hoursTimer recording using an external timer Make settings in the Week and Start columnsOFF for Program flashes For FPS flashesTo set alarm recording Setting alarm recordingDial clockwise OFF flashesOperates while an alarm is being triggered sec. minimum Maximum number of alarm recordingsSet REC Rate and Duration Recording pattern for SW and onlyTo set pre-alarm recording When alarm recording settings have been completedREC Rate for PRE-ALARM Recording flashes Cursor moves to recording rate and durationSetting the alarm trigger When pre-alarm recording settings have been completedDefault setting 1 MIN Cursor moves to Alarm Trigger Use this setting to indicate how alarms are to be detectedUse this procedure to set other sensor positions Setting the motion sensorsPress the Camera Select button LevelCursor moves to Level Flashes for the ModeOFF flashes for Level To BOFF flashes in the Alarm Retrigger field Setting alarm operation and displayExample Alarm „ To stop motion sensor recordingSetting alarm display Canceling alarmsCursor moves to Alarm Priority Setting data display General settings01-01-04 000000 REC 1% EN a Alarm General SETGeneral SET Setting display for video lossPerform the following if so required Alarm default setting OFF Setting the buzzerDisk Full default setting on Disk Error default setting onUse the same procedure to set 123456AB Setting the security lock„ Operation after setting passwords Setting the administrator passwordTurn the jog dial to select on Following this, turn the shuttle dial clockwiseTurn the jog dial clockwise Then turn the shuttle dial clockwiseSetting the security lock Setting and initializing the hard diskCanceling the security lock Initializing the hard diskExpanding the hard disk capacity Network settingsMaking network connections Connecting to an intranet using a hub Making network settingsNetwork SET screen is displayed OFF flashes for Network ControlSet Subnet Mask Set IP AddressSet Gateway Set PortEnter the password using the shuttle dial and jog dial Setting RS-485General SET screen appears Cursor moves to Status InfoNormal screen Setting procedure is ended and the display returns to‹DATA SpeedSetting quad positions Setting quad and multi 6 displayScreen SET Example Displaying Camera No in quad positionScreen SET Setting multi 6 positionsChecking modified screen positions Changes to1S flashes for Full Example Automatic switching of a full screen every 5 secondsSpecify Time Period a and Time Period B Setting the main monitor and monitorMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Cursor moves to Mask SET Setting masksMask SET screen is displayed Starts to flash for Time PeriodOFF flashes Settings ‹ indicates the default setting Setting the color levelColor Level SET screen is displayed ‹AUTO Auto flashesFAILURE/RECOVER Power FAILURE/USED TimePower DISK1 USEArea Initialized RecordOperation class Saving menu settings on a CompactFlash card Copy Menu SettingsSave Menus to CF Load Menus from CFLoading settings from a CompactFlash card Copy Menu SettingsWhen copying recording area settings Turn the jog dial to select LoadRS-485 specifications Interface SpecificationsRS-485 termination switch settings DVR/VCR command table Interface SpecificationsSpecifications SpecificationsJpeg XXXDimensions SpecificationsUnits mm 364.5 420 349 „ Example Recording to a 80 GB hard disk 100%-usage Table of recording rate and times„ Example After expansion to 160 GB 100%-usage „ Example After expansion to 300 GB 100%-usage 104Program recording rate Table of recording rate settingsMinutes 10s 20s 40s Table of pre-alarm recording timesFPS field/sec Normal REC Mode SET →P.62 Menu Setting SequenceTitle SET →P.47 HDD SET →P.81 Mask SET →P.92 Menu Setting SequenceRS-485 SET →P.85 Index Index Time/date search Timer recording Timer settings

Related manuals

Manual 48 pages 56.38 Kb