Sanyo DSR-3506P manual Setting auto deleting, Turn the jog dial to select the storage period

Page 62

3RECORD SET

2 Turn the jog dial to select setting (OFF, for example), and then turn the shuttle dial clockwise.

“REMAINING DISK WARNING” changes to “1%” from “**”.

[Settings] ( indicates the default setting)

	Setting	Description

	OFF	Recording is stopped when the normal recording area
	OFF	becomes full.
		becomes full.

	ON	Overwriting automatically starts from the beginning of
	ON	the normal recording area when it becomes full.
		the normal recording area when it becomes full.

.

Remaining disk warning

zIf this is set to “OFF”, the FULL indicator or ALARM FULL indicator will start to flash when the remaining hard-disk capacity reaches the percentage set for

“REMAINING DISK WARNING”.

3 Use the same procedure to set “ALARM RECORDING AREA” to “OFF”.

4 Turn the jog dial to select “REMAINING DISK WARNING”, and then turn the shuttle dial clockwise.

5 Turn the jog dial to set a “REMAINING DISK WARNING”, and then turn the shuttle dial clockwise.

The remaining capacity can be set anywhere between 1% (default) and 10%.

6 Press the [EXIT] button.

The setting procedure is ended and the display returns to the normal screen.

EXIT

A warning will be displayed in the operation display area when the remaining capacity for any recording area reaches the specified percentage value. In addition, the FULL indicator (for the normal recording area) or the ALARM FULL indicator (for the alarm recording area) will flash at this time.


FULL indicator			ALARM FULL indicator

Operation				Remaining
display area				capacity
				display
				display

01-01-04 00:00:00 REC 1%			EN A ALARM 0000
02

Setting auto deleting

You can set a storage period for recorded data as described below. When the set period has expired, the corresponding data will be automatically deleted.

1 Turn the jog dial to select “AUTO DELETE”, and then turn the shuttle dial clockwise.

“OFF” flashes.

2 Turn the jog dial to select the storage period.

You can set the storage period for recorded data “OFF“ or within a range of “1 DAY” - “99 DAYS” (full days).

English

61

Image 62

Contents Page Location PrecautionService Avoiding Electrical Shock and FireSymbols used in this manual Main featuresAccessories IntroductionContents Contents Settings Other„ Handling a detached HDD unit Before USE„ Notes on replacing the HDD Hard disk and cooling fan are consumable components Backup batteryBefore USE Important recordingsNames and Functions of Parts Front panelNames and Functions of Parts Rear panel Connecting Alarm in terminals Installation and ConnectionsConnecting an amplifier Basic connectionsConnecting control terminals Installation and ConnectionsConnecting Sensor Alarm OUT terminals Connecting the power cordOperation display area 01-01-04 000000 REC Reperat EN a AlarmPreparing for USE Changing the language Preparing for USEChanging the position of the operation display area Press the OSD button several timesTurn the shuttle dial clockwise Setting the timeExample Setting 830 on 22 May Press the Exit buttonHard disk recording areas Alarm recording areaPreparing for USE The internal hard disk Normal recording areaViewing on multiple screens Viewing Video from a CameraViewing on a full screen Press the No Camera Select buttonPress the Multi button Viewing Video from a CameraViewing with automatic screen selection Press the Sequence buttonPress the MON2 button Set MON.2 Display from Alarm Operation SET to ON. JP.74Viewing on the monitor Recording Timer recordingPress the Timer button Normal recordingEnd alarm recording Alarm recordingSet alarm recording When an alarm signal is detectedAfter entering the setting, press the Exit button Pre-alarm recordingSet pre-alarm recording If an alarm is detectedFast-forward and fast-rewind playback PlaybackPlaying video on a full screen Changing the playback speedPress the Zoom button during playback PlaybackEnlarging the playback video Move the zoom frame to the area to be magnifiedPress the Zoom button Viewing still imagesPerforming frame advance forward or reverse Press the Still button during playbackPress the Multi button during playback Playing video on multiple screensPress the Quad button during playback Searching for Recorded Video „ To view pre-alarm video Alarm searchPress the appropriate Alarm button during playback To view alarm video before or after the current playbackTime/date search Alarm thumbnail searchAlarm number for the selected recording will start to flash Turn the jog dial to select TIME/DATE SearchChannel Recording TOPRecording END SearchMotion detection search Search indicator lights and Search screen is displayedArchive area search Turn the jog dial to select the video for playbackEND Example Normal Cursor moves to ChannelStart Motion SensorOFF flashes Motion sensor setting screen is displayedSet the motion sensor to use for searching ‹OFFDisplay returns to the Motion Detection Search screen Carry out motion sensor setting again„ If not FOUND! is displayed Copying video to a CompactFlash card or Microdrive JP.36 Saving Copying Recorded VideoCopying video to the hard disk’s archive area JP.35 Press the Copy button Saving Copying Recorded VideoCopying video to the hard disk’s archive area Example Copying a specified 10-second portion of videoInsert a CompactFlash card „ To cancel a copy operationTurn the jog dial to select Seconds Insertion method Removal methodCopy screen is displayed Archive Area flashesJpeg images Viewing images copied to a CompactFlash card on a PCFormatting a CompactFlash card Images copied to a CompactFlash cardBasic menu operations Menu Configuration and OperationsMoving from the Main Menu to a sub-menu or setting screen Turn the jog dial to select a menuMovement and confirmation in sub-menus and setting screens Menu Configuration and OperationsRestoring menu setting items to their default values Be set, and then turn the shuttle dial Clockwise Sub-menu configurationMain menu Turn the jog dial to select the item to Sequence SET Sub menu Setting item Settings or display contentMulti Screen JP.87 Color Level JP.93Initial SET is used to make the following setting Initial settingsSetting the summer time Initial SETInitial SET Turn the jog dial to change the settingsWhen USE is selected for Summer Time SET Cursor moves to the time External clock settingCursor moves to the month To C Terminal To Clock SET in terminalDetecting connected cameras ExampleFirst position for title setting flashes Setting camera titlesExample Setting the title HALL-1F for Camera No Turn the jog dial to select HSetting holidays Example Setting 17 November as a holidayMonth Turn the shuttle dial clockwise after settingSet the day and month for item No DaySetting time periods Time Period a settings Set T1 to 6 AM Timer period settingsExample 1 Setting periods using Time Period a Time Period B settings Set T1 to 6 AMCursor moves to Mask Time period operations settingsTime Period a flashes Record SET is used to make the following settings Settings for recordingPerforming easy setup Record SETCursor moves to Timer Recording DAY Setting based on recording daysEasy Setup screen is displayed Record SETSet Picture Quality Example on Settings ‹ indicates the default settingDisplay returns to the Easy Setup screen Set Audio RecordingSetting based on recording rate See P.55 AlarmDisplaying the recording areas Recording Area SET screen is displayed„ Recording area allocations „ Default hard disk settingsChanging recording areas „ If the normal recording area is set to 0%Setting overwrite permission On flashes Setting recording conditionsNo on the Warning screen flashes Flashing 01-01-04 000000 REC 1% Setting auto deletingTurn the jog dial to select the storage period Clockwise Setting normal recordingTurn the shuttle dial clockwise Press the Exit button Set REC Program Group Setting program recordingSet REC Rate ProgramVideo from Camera No will not be recorded Cursor moves to 01 from Serect Individual Camera Rate FPSRecording rate flashes Start Timer settingsTimer setting items To cancel all set timer reservations „ To change a displayed setting item„ Picture quality and recording rate for timer recording Timer reservations spanning more than 24 hoursOFF for Program flashes Make settings in the Week and Start columnsTimer recording using an external timer For FPS flashesDial clockwise Setting alarm recordingTo set alarm recording OFF flashesSet REC Rate and Duration Maximum number of alarm recordingsOperates while an alarm is being triggered sec. minimum Recording pattern for SW and onlyREC Rate for PRE-ALARM Recording flashes When alarm recording settings have been completedTo set pre-alarm recording Cursor moves to recording rate and durationDefault setting 1 MIN Cursor moves to Alarm Trigger When pre-alarm recording settings have been completedSetting the alarm trigger Use this setting to indicate how alarms are to be detectedPress the Camera Select button Setting the motion sensorsUse this procedure to set other sensor positions LevelOFF flashes for Level Flashes for the ModeCursor moves to Level To BExample Alarm Setting alarm operation and displayOFF flashes in the Alarm Retrigger field „ To stop motion sensor recordingCursor moves to Alarm Priority Canceling alarmsSetting alarm display 01-01-04 000000 REC 1% EN a Alarm General settingsSetting data display General SETPerform the following if so required Setting display for video lossGeneral SET Disk Full default setting on Setting the buzzerAlarm default setting OFF Disk Error default setting on„ Operation after setting passwords Setting the security lockUse the same procedure to set 123456AB Setting the administrator passwordTurn the jog dial clockwise Following this, turn the shuttle dial clockwiseTurn the jog dial to select on Then turn the shuttle dial clockwiseCanceling the security lock Setting and initializing the hard diskSetting the security lock Initializing the hard diskMaking network connections Network settingsExpanding the hard disk capacity Network SET screen is displayed Making network settingsConnecting to an intranet using a hub OFF flashes for Network ControlSet Gateway Set IP AddressSet Subnet Mask Set PortGeneral SET screen appears Setting RS-485Enter the password using the shuttle dial and jog dial Cursor moves to Status Info‹DATA Setting procedure is ended and the display returns toNormal screen SpeedScreen SET Setting quad and multi 6 displaySetting quad positions Example Displaying Camera No in quad positionChecking modified screen positions Setting multi 6 positionsScreen SET Changes toExample Automatic switching of a full screen every 5 seconds 1S flashes for FullMAIN/MON.2 Monitor SET screen is displayed Setting the main monitor and monitorSpecify Time Period a and Time Period B Starts to flash for the time period Mask SET screen is displayed Setting masksCursor moves to Mask SET Starts to flash for Time PeriodColor Level SET screen is displayed Setting the color levelOFF flashes Settings ‹ indicates the default setting Auto flashes ‹AUTOPower Power FAILURE/USED TimeFAILURE/RECOVER DISK1 USEOperation class Initialized RecordArea Save Menus to CF Copy Menu SettingsSaving menu settings on a CompactFlash card Load Menus from CFWhen copying recording area settings Copy Menu SettingsLoading settings from a CompactFlash card Turn the jog dial to select LoadRS-485 termination switch settings Interface SpecificationsRS-485 specifications Interface Specifications DVR/VCR command tableJpeg SpecificationsSpecifications XXXUnits mm 364.5 420 349 SpecificationsDimensions „ Example After expansion to 160 GB 100%-usage Table of recording rate and times„ Example Recording to a 80 GB hard disk 100%-usage 104 „ Example After expansion to 300 GB 100%-usageTable of recording rate settings Program recording rateFPS field/sec Table of pre-alarm recording timesMinutes 10s 20s 40s Title SET →P.47 Menu Setting SequenceNormal REC Mode SET →P.62 RS-485 SET →P.85 Menu Setting SequenceHDD SET →P.81 Mask SET →P.92 Index Time/date search Timer recording Timer settings Index

Related manuals

Manual 48 pages 56.38 Kb