Sanyo DSR-3506P manual Searching for Recorded Video, Alarm search, To view pre-alarm video

Page 28

5SEARCHING FOR RECORDED VIDEO

Alarm search

Use the following procedure to search and playback all video stored in the alarm recording area. If pre-alarm video is being recorded, playback will start from immediately before the alarm.

1 Press the [SEARCH] button while the digital video recorder is recording or stopped.

The SEARCH indicator lights up and the <SEARCH> screen is displayed.

SEARCH

2 Turn the jog dial to select “ALARM SEARCH”, and then turn the shuttle dial clockwise.

The <ALARM SEARCH> screen is displayed.

This screen lists the eight most-recent alarm recordings.

(1)		(2)		(3)		(4)

(5)

(1)NO:

Indicates the alarm number.

(2)DATE/TIME:

Indicates the date and time at which the alarm video was recorded.

(3)CH:

Indicates the alarm video’s channel (or camera number).

(4)TOTAL ALARMS:

Indicates the total number of alarm video recordings.

(5)Preview:

Displays the selected alarm video.

3 Turn the jog dial to move the cursor and select the video for playback.

A preview of the selected alarm video is displayed in the preview screen. In this case, the video from the instant of alarm occurrence is displayed.

zTo display the next or previous recording Turn the jog dial clockwise or counter-clockwise accordingly.

zTo leave search mode

Press the [SEARCH] button. SEARCH indicator turns off.

4 Turn the shuttle dial clockwise.

The selected recording is played back in full screen mode.

01-01-04 00:00:00	EN A ALARM 0000

02

To view pre-alarm video

After beginning playback of an alarm recording identified by an alarm search, use the shuttle dial to reverse playback.

To view alarm video before or after the current playback

1 Press the appropriate [ALARM] button during playback.

ALARM

01-01-04 00:00:00

EN A ALARM 0000

02

zEach time the “ ” button is pressed, playback will skip to the preceding alarm video recording.

zEach time the “ ” button is pressed, playback will skip to the subsequent alarm video recording.

English

27

Image 28

Contents Page Precaution ServiceLocation Avoiding Electrical Shock and FireMain features AccessoriesSymbols used in this manual IntroductionContents Contents Settings Other„ Notes on replacing the HDD Before USE„ Handling a detached HDD unit Backup battery Before USEHard disk and cooling fan are consumable components Important recordingsNames and Functions of Parts Front panelNames and Functions of Parts Rear panel Installation and Connections Connecting an amplifierConnecting Alarm in terminals Basic connectionsInstallation and Connections Connecting Sensor Alarm OUT terminalsConnecting control terminals Connecting the power cordPreparing for USE 01-01-04 000000 REC Reperat EN a AlarmOperation display area Preparing for USE Changing the position of the operation display areaChanging the language Press the OSD button several timesSetting the time Example Setting 830 on 22 MayTurn the shuttle dial clockwise Press the Exit buttonAlarm recording area Preparing for USE The internal hard diskHard disk recording areas Normal recording areaViewing Video from a Camera Viewing on a full screenViewing on multiple screens Press the No Camera Select buttonViewing Video from a Camera Viewing with automatic screen selectionPress the Multi button Press the Sequence buttonViewing on the monitor Set MON.2 Display from Alarm Operation SET to ON. JP.74Press the MON2 button Timer recording Press the Timer buttonRecording Normal recordingAlarm recording Set alarm recordingEnd alarm recording When an alarm signal is detectedPre-alarm recording Set pre-alarm recordingAfter entering the setting, press the Exit button If an alarm is detectedPlayback Playing video on a full screenFast-forward and fast-rewind playback Changing the playback speedPlayback Enlarging the playback videoPress the Zoom button during playback Move the zoom frame to the area to be magnifiedViewing still images Performing frame advance forward or reversePress the Zoom button Press the Still button during playbackPress the Quad button during playback Playing video on multiple screensPress the Multi button during playback Searching for Recorded Video Alarm search Press the appropriate Alarm button during playback„ To view pre-alarm video To view alarm video before or after the current playbackAlarm thumbnail search Alarm number for the selected recording will start to flashTime/date search Turn the jog dial to select TIME/DATE SearchRecording TOP Recording ENDChannel SearchSearch indicator lights and Search screen is displayed Archive area searchMotion detection search Turn the jog dial to select the video for playbackExample Normal Cursor moves to Channel StartEND Motion SensorMotion sensor setting screen is displayed Set the motion sensor to use for searchingOFF flashes ‹OFF„ If not FOUND! is displayed Carry out motion sensor setting againDisplay returns to the Motion Detection Search screen Copying video to the hard disk’s archive area JP.35 Saving Copying Recorded VideoCopying video to a CompactFlash card or Microdrive JP.36 Saving Copying Recorded Video Copying video to the hard disk’s archive areaPress the Copy button Example Copying a specified 10-second portion of video„ To cancel a copy operation Turn the jog dial to select SecondsInsert a CompactFlash card Insertion method Removal methodCopy screen is displayed Archive Area flashesViewing images copied to a CompactFlash card on a PC Formatting a CompactFlash cardJpeg images Images copied to a CompactFlash cardMenu Configuration and Operations Moving from the Main Menu to a sub-menu or setting screenBasic menu operations Turn the jog dial to select a menuRestoring menu setting items to their default values Menu Configuration and OperationsMovement and confirmation in sub-menus and setting screens Main menu Turn the jog dial to select the item to Sub-menu configurationBe set, and then turn the shuttle dial Clockwise Sub menu Setting item Settings or display content Multi Screen JP.87Sequence SET Color Level JP.93Initial settings Setting the summer timeInitial SET is used to make the following setting Initial SETWhen USE is selected for Summer Time SET Turn the jog dial to change the settingsInitial SET External clock setting Cursor moves to the monthCursor moves to the time To C Terminal To Clock SET in terminalDetecting connected cameras ExampleSetting camera titles Example Setting the title HALL-1F for Camera NoFirst position for title setting flashes Turn the jog dial to select HSetting holidays Example Setting 17 November as a holidayTurn the shuttle dial clockwise after setting Set the day and month for item NoMonth DaySetting time periods Timer period settings Example 1 Setting periods using Time Period aTime Period a settings Set T1 to 6 AM Time Period B settings Set T1 to 6 AMTime Period a flashes Time period operations settingsCursor moves to Mask Settings for recording Performing easy setupRecord SET is used to make the following settings Record SETSetting based on recording days Easy Setup screen is displayedCursor moves to Timer Recording DAY Record SETExample on Settings ‹ indicates the default setting Display returns to the Easy Setup screenSet Picture Quality Set Audio RecordingSetting based on recording rate Alarm Displaying the recording areasSee P.55 Recording Area SET screen is displayed„ Default hard disk settings Changing recording areas„ Recording area allocations „ If the normal recording area is set to 0%Setting overwrite permission No on the Warning screen flashes Flashing Setting recording conditionsOn flashes Turn the jog dial to select the storage period Setting auto deleting01-01-04 000000 REC 1% Turn the shuttle dial clockwise Press the Exit button Setting normal recordingClockwise Setting program recording Set REC RateSet REC Program Group ProgramRecording rate flashes Cursor moves to 01 from Serect Individual Camera Rate FPSVideo from Camera No will not be recorded Timer setting items Timer settingsStart „ To change a displayed setting item „ Picture quality and recording rate for timer recordingTo cancel all set timer reservations Timer reservations spanning more than 24 hoursMake settings in the Week and Start columns Timer recording using an external timerOFF for Program flashes For FPS flashesSetting alarm recording To set alarm recordingDial clockwise OFF flashesMaximum number of alarm recordings Operates while an alarm is being triggered sec. minimumSet REC Rate and Duration Recording pattern for SW and onlyWhen alarm recording settings have been completed To set pre-alarm recordingREC Rate for PRE-ALARM Recording flashes Cursor moves to recording rate and durationWhen pre-alarm recording settings have been completed Setting the alarm triggerDefault setting 1 MIN Cursor moves to Alarm Trigger Use this setting to indicate how alarms are to be detectedSetting the motion sensors Use this procedure to set other sensor positionsPress the Camera Select button LevelFlashes for the Mode Cursor moves to LevelOFF flashes for Level To BSetting alarm operation and display OFF flashes in the Alarm Retrigger fieldExample Alarm „ To stop motion sensor recordingSetting alarm display Canceling alarmsCursor moves to Alarm Priority General settings Setting data display01-01-04 000000 REC 1% EN a Alarm General SETGeneral SET Setting display for video lossPerform the following if so required Setting the buzzer Alarm default setting OFFDisk Full default setting on Disk Error default setting onSetting the security lock Use the same procedure to set 123456AB„ Operation after setting passwords Setting the administrator passwordFollowing this, turn the shuttle dial clockwise Turn the jog dial to select onTurn the jog dial clockwise Then turn the shuttle dial clockwiseSetting and initializing the hard disk Setting the security lockCanceling the security lock Initializing the hard diskExpanding the hard disk capacity Network settingsMaking network connections Making network settings Connecting to an intranet using a hubNetwork SET screen is displayed OFF flashes for Network ControlSet IP Address Set Subnet MaskSet Gateway Set PortSetting RS-485 Enter the password using the shuttle dial and jog dialGeneral SET screen appears Cursor moves to Status InfoSetting procedure is ended and the display returns to Normal screen‹DATA SpeedSetting quad and multi 6 display Setting quad positionsScreen SET Example Displaying Camera No in quad positionSetting multi 6 positions Screen SETChecking modified screen positions Changes toExample Automatic switching of a full screen every 5 seconds 1S flashes for FullSpecify Time Period a and Time Period B Setting the main monitor and monitorMAIN/MON.2 Monitor SET screen is displayed Starts to flash for the time period Setting masks Cursor moves to Mask SETMask SET screen is displayed Starts to flash for Time PeriodOFF flashes Settings ‹ indicates the default setting Setting the color levelColor Level SET screen is displayed Auto flashes ‹AUTOPower FAILURE/USED Time FAILURE/RECOVERPower DISK1 USEArea Initialized RecordOperation class Copy Menu Settings Saving menu settings on a CompactFlash cardSave Menus to CF Load Menus from CFCopy Menu Settings Loading settings from a CompactFlash cardWhen copying recording area settings Turn the jog dial to select LoadRS-485 specifications Interface SpecificationsRS-485 termination switch settings Interface Specifications DVR/VCR command tableSpecifications SpecificationsJpeg XXXDimensions SpecificationsUnits mm 364.5 420 349 „ Example Recording to a 80 GB hard disk 100%-usage Table of recording rate and times„ Example After expansion to 160 GB 100%-usage 104 „ Example After expansion to 300 GB 100%-usageTable of recording rate settings Program recording rateMinutes 10s 20s 40s Table of pre-alarm recording timesFPS field/sec Normal REC Mode SET →P.62 Menu Setting SequenceTitle SET →P.47 HDD SET →P.81 Mask SET →P.92 Menu Setting SequenceRS-485 SET →P.85 Index Time/date search Timer recording Timer settings Index

Related manuals

Manual 48 pages 56.38 Kb