3M 965DSP-B instruction manual Voltage

Page 10

Voltage

This function first measures and displays the DC voltage between the Red and Black test leads.

Press the [Tab] key to move to the next test lead configuration.

Press the [Enter] key to switch between DC and AC voltage.

Press the [Tab] key to move to the next test lead configuration.

Press the [Enter] key to switch between AC and DC voltage.

10

Image 10

Contents Dynatel TM 965DSP-B Subscriber Loop Analyzer Page Table of Contents Out of Box Test Leads ScreenKeypad Control Keys EditingFunction Keys Setup Welcome ScreenUnits ContrastVoltage Current Resistance Toolbox Self-Calibration Load Coils Ohms/Distance Caller ID Opens Edit Custom Calibrate to Cable Tone Page RFL Resistance Fault Locate Separate Pair This is the preferred hookupPage RFL Single Pair Page RFL Setup RFL Multi-section SetupPage Isdn Isdn Bit Error Test Page Loss NoiseLongitudinal Balance Wideband LossAuto Inactive PairAuto Setup Active PairDial Noise/Longitudinal Balance Dial LossOpens Cable Type Talk Set Talk Set Setup Level of Charge Care and MaintenanceCharging AC/DC AdaptorReplacement Items Battery HolderTest Leads Symptom Cause Solution Unit does not turn on Repair965DSP-B Specifications New Product Limited Warranty