3M 965DSP-B instruction manual RFL Setup, RFL Multi-section Setup

Page 27

RFL Setup

Use the RFL Setup to change the Gauge and/or the Temperature of a single section of cable.

Press the [Tab] key to select either the Wire Gauge menu or the Temperature for editing.

If you select the Wire Gauge menu, press the [Up] and [Down] keys to select the desired gauge.

If you choose Temperature, enter the value of the desired temperature using the blue keys as a numeric keypad.

Press the [Enter] key to accept the changes and return to the previous screen. Press the [Back] key to return without saving the changes.

Press the [Setup] key if you would like to go to the Multi-Section Setup.

RFL Multi-section Setup

27

Image 27

Contents Dynatel TM 965DSP-B Subscriber Loop Analyzer Page Table of Contents Out of Box Screen Test LeadsKeypad Editing Control KeysFunction Keys Welcome Screen SetupContrast UnitsVoltage Current Resistance Toolbox Self-Calibration Load Coils Ohms/Distance Caller ID Opens Edit Custom Calibrate to Cable Tone Page Separate Pair This is the preferred hookup RFL Resistance Fault LocatePage RFL Single Pair Page RFL Multi-section Setup RFL SetupPage Isdn Isdn Bit Error Test Page Noise LossWideband Loss Longitudinal BalanceInactive Pair AutoActive Pair Auto SetupDial Loss Dial Noise/Longitudinal BalanceOpens Cable Type Talk Set Talk Set Setup AC/DC Adaptor Care and MaintenanceCharging Level of ChargeBattery Holder Replacement ItemsTest Leads Repair Symptom Cause Solution Unit does not turn on965DSP-B Specifications New Product Limited Warranty