3M 965DSP-B instruction manual New Product Limited Warranty

Page 43

New Product Limited Warranty:

3M Telecom Systems (herein referred to as the Seller) warrants its products to be free from defects in material and workmanship, subject to the following terms and provisions:

a)All instruments are warranted for 12 months after date of shipment from the Seller to the original purchaser.

b)Seller’s obligations under this warranty are limited to repairing, replacing, or adjusting at Seller’s option any of Seller’s products which after normal and proper usage, proves to be defective on Seller’s inspection, provided that the purchaser shall have reasonably inspected products when received and notified the Seller of any apparent defects within 15 days of receipt of shipment. Seller shall not be liable for any injury or for any manufacturing costs of the buyer, or any other special consequential damages incurred by the buyer by reason of the use of any of the Seller’s equipment.

c)Equipment delivered by the Seller shall not be considered defective if it satisfactorily fulfills the order or complies with the published specifications on standard catalog items. This warranty does not extend to any of Seller’s products which have been subjected to misuse, neglect, accident or improper applications, nor shall it extend to units which have been repaired or altered outside of the Seller’s factory, nor to any associated instruments, equipment or apparatus.

Important Purchaser Notice

All statements, recommendations, and technical information related to Seller’s products are based on information believed to be reliable, but the accuracy or completeness thereof is not guaranteed. Before using the equipment, the buyer should determine the suitability of the product for the intended use, and assumes all risk and liability whatsoever in connection with that use.

All statements or recommendations not contained in Seller’s standard publications shall have no force or agreement unless an agreement signed by the officers of Seller, and the above is

made in lieu of all warranties, expressed or implied.

43

Image 43
Contents Dynatel TM 965DSP-B Subscriber Loop Analyzer Page Table of Contents Out of Box Test Leads ScreenKeypad Editing Control KeysFunction Keys Welcome Screen SetupContrast UnitsVoltage Current Resistance Toolbox Self-Calibration Load Coils Ohms/Distance Caller ID Opens Edit Custom Calibrate to Cable Tone Page Separate Pair This is the preferred hookup RFL Resistance Fault LocatePage RFL Single Pair Page RFL Multi-section Setup RFL SetupPage Isdn Isdn Bit Error Test Page Noise LossWideband Loss Longitudinal BalanceInactive Pair AutoActive Pair Auto SetupDial Noise/Longitudinal Balance Dial LossOpens Cable Type Talk Set Talk Set Setup AC/DC Adaptor Care and MaintenanceCharging Level of ChargeReplacement Items Battery HolderTest Leads Repair Symptom Cause Solution Unit does not turn on965DSP-B Specifications New Product Limited Warranty