3M 965DSP-B instruction manual Welcome Screen, Setup

Page 8

Welcome Screen

This is the screen you see when you first turn on the 965DSP-B. It shows the model name, serial number, copyright date, software version, and the version country.

When the Welcome screen shows, press [Setup] to go to the Setup screen.

Setup

Press [Enter] to change the Units of Measurements (Distance and Temperature).

Press [Back] to return to the Welcome screen.

Image 8

Contents Dynatel TM 965DSP-B Subscriber Loop Analyzer Page Table of Contents Out of Box Keypad ScreenTest Leads Control Keys EditingFunction Keys Setup Welcome ScreenUnits ContrastVoltage Current Resistance Toolbox Self-Calibration Load Coils Ohms/Distance Caller ID Opens Edit Custom Calibrate to Cable Tone Page RFL Resistance Fault Locate Separate Pair This is the preferred hookupPage RFL Single Pair Page RFL Setup RFL Multi-section SetupPage Isdn Isdn Bit Error Test Page Loss NoiseLongitudinal Balance Wideband LossAuto Inactive PairAuto Setup Active PairOpens Cable Type Dial LossDial Noise/Longitudinal Balance Talk Set Talk Set Setup Care and Maintenance ChargingLevel of Charge AC/DC AdaptorTest Leads Battery HolderReplacement Items Symptom Cause Solution Unit does not turn on Repair965DSP-B Specifications New Product Limited Warranty