3M 965DSP-B instruction manual

The Multi-Section screen shows a summary of the lengths for up to six sections. The screen also shows the common temperature for all six sections.

Press the [Tab] key to select either the Section Information or the Temperature for editing.

If you choose Temperature, enter the value of the desired temperature using the Blue keys as a numeric keypad.

If you chose to edit the section information , use the [Up] and [Down] keys to select the desired section, then use the [Setup] key to edit the selected section and go to the following screen:

Press the [Tab] key to select either the Wire Gauge menu or the Section Length.

If you select the Wire Gauge menu, press the [Up] and [Down] keys to select the desired gauge.

If you choose Section Length, enter the value of the desired temperature using the blue keys.

Press the [Enter] key to accept the changes and return to the previous screen. Press the [Back] key to return to the previous screen without making changes.

Press the [Enter] key from the RFL Multi- section screen (shown on page 27) to perform a muti-section RFL measurement.

28