Winegard RD-9946 installation manual El Angle =, Press Select B if correct satellite was not found

5. Press [ARROW BUTTONS] to enter correct elevation, Figure 14.

5. Press SELECT A	4. Press UP arrow button to
	increase elevation by 1o
	increments

4.Press RIGHT arrow button to increase elevation by 5o increments

SELECT A

SELECT B

El Angle = 45

PINNACLE POSITIONER

by WINEGARD

Model RD-9900

Figure 14	4. Press LEFT arrow button to decrease	4. Press DOWN arrow button to
	elevation by 5o increments
		decrease elevation by 1o increments

6. Press [SELECT A] Start Search, Figure 15. This will begin the search for the satellite. If you selected the wrong elevation, press [SELECT B] Quit, this will return you to step 3. Repeat 3 through 5 to select the correct elevation.

6. Press SELECT A

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

Start Search Quit

Model RD-9900

Figure 15	7. Verify that system has found correct satellite (you will get a picture). Since
	the DBS services use a digital signal and the satellites are only separated by
	9o, the system can find the wrong satellite. Press [SELECT A] if correct
	satellite was found, Figure 16. You are now ready to watch satellite TV! If the
	wrong satellite was found, press [SELECT B] to continue the search.
	If no satellite was found, the message Satellite Not Found, Press Any
	Button, will be displayed by the positioner. Press any button to return to the
	menu shown in Figure 12, page 9.

7. Press SELECT A if correct satellite was found

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

Correct Satellite Continue Search

Model RD-9900

Figure 16 Press SELECT B if correct satellite was not found 29