Test RD-9901 Remote Control Wallplate
2.Press SELECT A or B as appropriate
To check the Remote Control Wall Plate, proceed as follows:
1.Check that
2.Check that telephone type cable is plugged securely into jack on side on remote control wall plate.
3.Access Edit Menu; press [UP/DOWN] arrow buttons until Edit is displayed on positioner display. See Figure 9.
4.Press [SELECT A or B] as appropriate to enter Edit Menu. See Fig. 9.
1.Press UP/DOWN arrow buttons to get Manual Move on screen
SELECT A
SELECT B
Edit
Search DSS
PINNACLE POSITIONER
by WINEGARD
Model
Figure 9
4.Press SELECT A to enter code
5.Press [UP] arrow button until 3000 is displayed. See Figure 10.
6.Press [SELECT A] to enter code. See Figure 10.
7.Press [SELECT B] Test Remote Panel, see Figure 11.
3.Press UP button until 3000 is displayed
SELECT A
SELECT B
PINNACLE POSITIONER
by WINEGARD
Enter Code: 3000
Model
Figure 10
57