Winegard RD-9946 installation manual Return To Defaults, Press Select a or B as appropriate

Return To Defaults

2.Press SELECT A or B as appropriate

Perform the following commands to return the positioner to factory defaults:

1.Press [UP/DOWN] arrow until Edit is displayed on positioner. See Figure 3.

2.Press [SELECT A or B] Edit, see Figure 3.

1.Press UP/DOWN arrow buttons to get Edit on screen

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

Edit

Search DSS

Model RD-9900

Figure 3

4.Press SELECT A to enter code

3.Press [UP] arrow button until positioner display shows 3000. See Figure 4.

3.Press UP button until 3000 is displayed

SELECT A

SELECT B

PINNACLE POSITIONER

by WINEGARD

Enter Code: 3000

Model RD-9900

Figure 4

4.Press [SELECT A] Enter Code: 3000 to access Edit Menu. See Figure

NOTE: To exit Edit Menu, press [DOWN] arrow key, then [SELECT B] Quit to exit Edit Menu.

54