Memorex MVR2040A Recording ONE Program While Watching Another, To Stop Recording, To Record Again

Page 19
CH 110

RECORDING A TV PROGRAM

VHF/UHF/CATV CHANNELS

TV

CATV

VHF

VHF

2-13

2-13

UHF

STD/HRC/IRC

14-69

14-36

 

(A) (W)

 

37-59 (AA) (WW)

 

60-85

(AAA) (ZZZ)

 

86-94

 

(86) (94)

 

95-99

(A-5) (A-1)

 

100-125

 

(100)(125)

 

01

(5A)

3Press the direct channel selection buttons or the CHANNEL or button to select the channel to be recorded.

1-9 Press 0 twice and then 1-9 as required. Example: To select 2, Press “002”.

10-12 Press 0 first and then the remaining 2 digits in order from left to right.

Example: Press 012 for “12”. 13-99 Press 2 digits in order.

Example: Press 22 for “22”.

100-125 Press the 3 digits in order.

Example: Press 110 for “110”.

"" will appear on screen for about 4 seconds. The REC indicator will flash in the display for about 4 seconds.

NOTE: The pause function will be released after 5 minutes to prevent damage to the tape or the VCR. The VCR will change to the STOP mode.

NOTE: AUTO REWIND FEATURE

This VCR will automatically rewind the tape when the tape has ended (except during OTR and TIMER REC). It will also eject the tape and turn the VCR’s power OFF.

RECORDING ONE PROGRAM WHILE WATCHING ANOTHER

While the VCR is recording, press the TV/VCR selector button to select the TV position.

The TV/VCR indicator will go off and recording will continue.

Select the TV channel you want to watch by using the TV channel selector.

NOTE: Some CATV hookups do not permit viewing one channel while recording another. See pages 12,13.

ENGLISH

4 Press the REC/OTR button.

CH 110

" " will appear on the screen for about 4 seconds. The REC indicator will light in the display.

NOTE: Since the VCR has its own TV tuner, it is not actually necessary to have the TV turned on in order to make a recording. Turning on the TV merely allows confirmation of the proper channel settings on your VCR.

TO STOP RECORDING

Press the STOP button to stop recording.

" " will appear on screen for about 4 seconds. The STOP indicator will light in the display for about 4 seconds.

TO PREVENT AN ACCIDENTAL RECORDING

After recording, break off the erase prevention tab if you do not wish to record over the tape.

Screwdriver

Erase prevention tab

TO RECORD AGAIN

Cover the hole with adhesive tape.

Be careful the tape does not extend past the edges of the cassette housing.

TO STOP RECORDING TEMPORARILY

Press the PAUSE/STILL button to avoid recording unwanted material. Press again or press the REC/OTR button to continue the recording.

Adhesive tape

19

4E30401A E P14-19

19

17/04/2001, 14:01

Image 19
Contents MVR2040A Series C MVR2041 Retain Instructions CleaningAccessories Read InstructionsGrounding or Polarization Power SourcesPower Lines VentilationHeat Damage Requiring ServiceReplacement Parts Safety CheckLocation and Handle PrecautionsPower Source Moisture CondensationEffective Distance of the Remote Control Precautions FeaturesBattery Cautions Battery InstallationTable of Contents Location of Controls Remote ControlFront Fluorescent Display Rear2829 Antenna to VCR Connection Basic ConnectionsSeparate VHF and UHF Antennas VCR to TV Connection Catv Cable TV Connections Allows Prevents SwitchIncoming Converter Cable DescramblerAUDIO/VIDEO Connection AUDIO/VIDEO ConnectionsStereo Amplifier Connections Check Before YOU Begin Setting the Video ChannelSetting the Clock Language SelectionTo ADD/DELETE Channels Setting the ChannelsAutomatic Memory Tuning Noise EliminationPlayback Special Playback Using Zero ReturnRecording a TV Program To Record Again Recording ONE Program While Watching AnotherTo Stop Recording To Prevent AN Accidental RecordingSetting the Timer Recording ONE-TOUCH Timer Recording OTRIntact. The VCR will automatically turn on ON-SCREEN Function Display Duplicating a Video Tape Video Head CleaningVideo Head Cleaning Make all connections before turning on the powerRecording Before Requesting ServiceSymptom Cause Possible Solution Power TV Broadcast ReceptionSymptom Cause Possible Solution Remote Control SpecificationsMemo Precaucion Lineas DE Alimentacion VentilacionFuentes DE Alimentacion Tormentas ElectricasRevision DE Seguridad Servicio19. DAÑ OS QUE Requieran Reparacion Piezas DE RepuestoFuente DE Alimentacion PrecaucionesCondensacion DE Humedad Posicion Y ManejoPrecaucion CON LAS Pilas CaracteristicasInstalacion DE Pilas Visualizador fluorescente de funció n mú ltiple En IndiceSistema automá tico de repetició n de reproducció n Presentació n de 3 idiomas en pantalla UstedParte Delantera Ubicacion DE LOS ControlesControl Remoto Visualizador Fluorescente Parte TraseraConexion DE Antena a Videograbador Conexiones BasicosTelevisor con entrada única de 75 ohmios para VHF/UHF Conexion DEL Videograbador a UN TelevisorPermite No Permite Conexiones DE TV Cable CatvDivisor InterruptorInterruptor A/B Conexion DE AUDIO/VIDEO Conexiones DE AUDIO/VIDEOConexion DEL Amplificacor Estereo Para un sintonizador de TV de pulsador Ajuste DEL Canal DE VideoAjuste DEL Reloj Seleccion DE IdiomaSeleccion DE TV/CATV Ajuste DE CanalesEliminacion DE Ruido Borrado DE UN Canal DE LA MemoriaReproduccion Colocacion Y ExtraccionUSO DE Retorno AL Cero Reproduccion EspecialGrabacion DE UN Programa DE TV VHF/UHF/CATV Canals Para Detener LA GrabacionPara Detener Temporalmente LA Grabacion Para Grabar UN Programa Mientras SE VE OtroConfirme Antes DE Empezar Ajuste DE LA Grabacion POR TemporizadorEncienda el TV y fije el Canal 3 ó Indicacion DE Funciones EN LA Pantalla Limpieza DE LA Cabeza DE Video Duplicacion DE UNA Cinta DE VideoPresione el botón de Input Antes DE Solicitar Servicio Control Remoto