Marantz RC3001 manual Backlightbacklightillumination Time Setting

Page 26

BACKLIGHT(BACKLIGHTILLUMINATION TIME SETTING)

Press the LIGHT button on the RC3001 to turn on the backlight, then set the time until the backlight turns off.

1. Press the button next to the “BACKLIGHT” indicator in the SYS.SETUP menu screen in the LCD to display the backlight illumination time setting screen.

2. Press the buttons (right: +, left: -) displayed next to TIME to set the illumination time. The time can be set in 1-second intervals from 0 to 60 seconds.

After deciding the settings, press the ENTER button.

3. The message “COMPLETED” is displayed on the LCD to indicate that the illumination time setting is completed.

•Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu.

•Pressing the Home button returns the LCD to the MAIN MENU.

Note:

Setting the BACK LIGHT TIMER to 0 sec is equivalent to turning off the backlight so that the backlight does not turn on even when the LIGHT button is pressed.

ENGLISH

Image 26

Contents Model RC3001 User Guide For US and Canada Français EnglishEspañol DeutschDeutsch EnglishFrançais EspañolNota Sobre EL Reciclado Remarque Concernant LE RecyclageRECYCLING-HINWEIS Nota SUL RiciclaggioTable of Contents FeaturesAttach the battery case cover Load the Rechargeable BatteryPack Into the Remote Controller Before USEController, and connect the AC adapter Charging the Battery PackRemove the bottom cover of the remote To the charging terminal next to the USB portRemote controller display Remote ControllerCommand Home mode and the device modesRemote Controller LCD This jack connects the supplied IR emitter cable This is a rod antenna for receiving RF signalsThis jack connects to the supplied AC adapter Mounting Procedure Precautions InstallationMounting Location Precautions Mounting Procedure5mm Changing the IR / RF Settings Using the Remote Controller With Infrared RaysUsing the Remote Controller With Radio FrequencyConnecting the RX3001 with Other Devices Connecting to Marantz EquipmentConnect the supplied AC adapter to the DC jack Connecting to NON-MARANTZ EquipmentConnecting to AN AC Adapter Setting the Channel SetupSetting the IR Output Level Output 4+5+6 Output 1+2+3Setting the Group ID Selector Emitter Output Output signalDVD input command for Marantz AV Receiver RC3001 Button SettingsSleep Timer Basic OperationLearning Function Other OperationMain Menu Entering the Main MenuTo learn This screen changes to Home modePress the button next to the displayed Operation Settings TimerChecking the Settings Press the button next to the Timer SETPress a button next to the Everyday or Operation ON/OFF Settings Either press the Enter button or waitSYS.SETUP Clock Clock SettingBacklightbacklightillumination Time Setting Message Completed is displayed LCD LCD SettingLCD Timer LCD timer setting Beep Beep Sound Setting This sets the built-in beep sound in the RC3001MEM Clear Initialization Setting Programmable Codes Status IndicatorReset Specifications DC9V 800mA Up to 100kHz90g 0.2lbs MIN105mm 4-3/16insRepairs Cleaning of Equipment External SurfacesOthers If the equipment becomes heavily soiledIs a registered trademark