Marantz RC3001 manual MEM Clear Initialization Setting

Page 29

ENGLISH

MEM CLEAR (INITIALIZATION SETTING)

This returns the settings made in the RC3001 to their initial settings.

1. Press the button next to the “MEM CLEAR” indicator in the SYS.SETUP menu screen in the LCD to display the initialization setting screen.

2. Press the button next to the “NO” (Disable) or “YES” (Enable) indicators on the LCD to either enable or disable initialization.

Note:

The LEARNING and CLOCK settings are not initialized.

•Either press the ENTER button or wait three seconds for the LCD to automatically return to the SYS.SETUP menu.

•Pressing the Home button returns the LCD to the MAIN MENU.

3. Pressing the NO button automatically returns the LCD to the SYS.SETUP menu.

Pressing the YES button displays “COMPLETED” on the LCD and completes initialization.

The setting items that are initialized are shown below.

•TIMER SETUP

•BACK LIGHT TIMER

•LCD

•BEEP

Image 29

Contents Model RC3001 User Guide For US and Canada Español EnglishFrançais DeutschFrançais EnglishDeutsch EspañolRECYCLING-HINWEIS Remarque Concernant LE RecyclageNota Sobre EL Reciclado Nota SUL RiciclaggioFeatures Table of ContentsPack Into the Remote Controller Load the Rechargeable BatteryAttach the battery case cover Before USERemove the bottom cover of the remote Charging the Battery PackController, and connect the AC adapter To the charging terminal next to the USB portCommand Remote ControllerRemote controller display Home mode and the device modesRemote Controller LCD This jack connects the supplied IR emitter cable This is a rod antenna for receiving RF signalsThis jack connects to the supplied AC adapter Mounting Location Precautions InstallationMounting Procedure Precautions Mounting Procedure5mm Using the Remote Controller Using the Remote Controller With Infrared RaysChanging the IR / RF Settings With Radio FrequencyConnecting to Marantz Equipment Connecting the RX3001 with Other DevicesConnect the supplied AC adapter to the DC jack Connecting to NON-MARANTZ EquipmentConnecting to AN AC Adapter Setting the IR Output Level SetupSetting the Channel Output 4+5+6 Output 1+2+3Emitter Output Output signal Setting the Group ID SelectorSleep Timer RC3001 Button SettingsDVD input command for Marantz AV Receiver Basic OperationMain Menu Other OperationLearning Function Entering the Main MenuTo learn This screen changes to Home modePress the button next to the displayed Checking the Settings TimerOperation Settings Press the button next to the Timer SETPress a button next to the Everyday or Either press the Enter button or wait Operation ON/OFF SettingsClock Clock Setting SYS.SETUPBacklightbacklightillumination Time Setting Message Completed is displayed LCD LCD SettingLCD Timer LCD timer setting This sets the built-in beep sound in the RC3001 Beep Beep Sound SettingMEM Clear Initialization Setting Programmable Codes Status IndicatorReset Specifications 90g 0.2lbs Up to 100kHzDC9V 800mA MIN105mm 4-3/16insOthers Cleaning of Equipment External SurfacesRepairs If the equipment becomes heavily soiledIs a registered trademark